Preservation Solutions™ Polycryl is a large molecular weight acrylic polymer that will fill and strengthen punky or spalt wood. Polycryl is water-soluble and penetrates best when wood is green. The softer the wood, the better the penetration. Polycryl will not penetrate hard wood. NOTE: Polycryl should be used before Pentacryl.

Originally developed for treating waterlogged timber, Preservation Solutions™ Pentacryl Wood Stabilizer prevents cracking by displacing water and moisture in the wood fiber. By immersing unseasoned wood in Pentacryl for the recommended length of time, drying time for green timber can be reduced by 90% while eliminating cracking and splitting. Pentacryl will not discolor the wood, is not hydroscopic and will not oxidize, decompose or migrate in the wood when exposed to different degrees of temperature or humidity. It accepts most types of finishes and can be stained and glued. How much do I need? The average wet 6" x 6" x 2" bowl blank absorbs approximately 2 oz. of Pentacryl. Instructions included.

Tree Saver™ Green Wood Sealer is a specially formulated PVA based material that protects unseasoned bowls against cracking while reducing drying time by up to 50% compared to popular wax base green wood sealers. *Guaranteed to outperform all wax based sealers *Reduces drying time by up to 50% *Dries translucent *Doesn’t collect dust and debris *Won’t make your floor slippery *No-fuss water clean up *Non-flammable *Specially formulated exclusively for Craft Supplies USA *Average coverage: 100 sq ft per gallon *Made in the USA

Use Artisan® Woodsealer for sealing the ends of logs or lumber or to coat green turned bowls to control checking and splitting during the seasoning period. The coating is a water base, wax type emulsion which will dry clear and remain flexible; much superior to paraffin wax or paints. High figured areas in bowls or lumber as well as knots, should be coated with sealer to prevent checking. In some species of wood, where borers or beetles give particular problems, removing bark from the edge of the planks and coating the complete surface area of the plank will usually prevent infestation, as the adult females do not find suitable places to lay the eggs and begin the infestation cycle.
Rough end grain will take more coating per square foot, but on the average, about 100 square feet per gallon may be expected.

Gorilla Glue® Wood Glue is strong and fast-setting making it ideal for bonding segmented woodturnings. *Strong and fast setting *Short clamp time *Dries natural color, no foam *Water clean-up *Non-Toxic, no harmful fumes *Formulated for hardwoods, softwoods, and natural wood composites *8 oz. *Made in USA

The Easy Wood Tools™ Lexan® Chip Deflector is fully adjustable and is designed to mount directly to the tool shank of Easy Wood Tools™ and deflects wood chips away from you when cutting. *Not a substitute for proper eye protection

by Richard Raffan Thousands of novice turners have learned to turn with Turning Wood with Richard Raffan. Completely revised and updated, this classic is the definitive book on turning. With new techniques and up-to-date information on tools, this book is a great resource for every turner. Turning expert Richard Raffan's easy-to-follow instructions show you how to choose the right chucks and tools for the job, sharpen and maintain your tools, handle tools safely and efficiently and learn the basics with ease. *202 pages *Soft Cover

The Easy Hollower No. 1 is a straight shank tool designed for boring out the bulk of wood from the center of the vessel before undercutting the sides and rim. *For bulk wood removal and boring *Tool measures: 1/2" x 8-1/2" *14" Premium handle *Uses Ci5 carbide cutter Ideal for woodturners of all skill levels, Easy Wood Tools™ Easy Hollowers combine the benefits of the Easy Wood Tools™ razor sharp carbide cutter with a precision milled flat tool shank for stability and strength when turning small hollow forms.

Ideal for woodturners of all skill levels, Easy Wood Tools™ Easy Hollowers combine the benefits of the Easy Wood Tools™ razor sharp carbide cutter with a precision milled flat tool shank for stability and strength when turning small hollow forms.
The Easy Hollower No. 3 is designed for undercutting the sides and rim of the vessel while leaving a smooth finished surface. *For undercutting sides and rim *Tool measures: 1/2" x 9-1/2" *20" premium American Hickory handle for increased strength, reach and functionality *Full-Size tool uses Ci3 carbide cutter

Easy Wood Tools™ proprietary carbide cutters are razor-sharp for an exceptional finish off the screw. When the cutting edge is dull, simply rotate the cutter to expose a fresh cutting edge. *Fits the Easy Parting Tool *Razor sharp cutting edge *Mounting screw and wrench included *Made in USA

Easy Wood Tools™ proprietary carbide cutters are razor-sharp for an exceptional finish off the screw. When the cutting edge is dull, simply rotate the cutter to expose a fresh cutting edge. *Fits the Mini and Mid-size Easy Rougher *Ci2 SQ Square Carbide Cutter *Razor sharp cutting edge *Mounting screw included *Made in USA

Easy Wood Tools™ proprietary carbide cutters are razor-sharp for an exceptional finish off the screw. When the cutting edge is dull, simply rotate the cutter to expose a fresh cutting edge. *Fits the full-size, mid-size, and mini Easy Detailer *Ci4 Carbide Cutter *Razor sharp cutting edge *Mounting screw included *Made in USA

Easy Wood Tools™ proprietary carbide cutters are razor-sharp for an exceptional finish off the screw. When the cutting edge is dull, simply rotate the cutter to expose a fresh cutting edge. *Fits the Easy Finisher Pro and full-size Easy Finisher *Ci0 Round Carbide Cutter *Razor sharp cutting edge *Mounting screw included *Made in USA

Easy Wood Tools™ proprietary carbide cutters are razor-sharp for an exceptional finish off the screw. When the cutting edge is dull, simply rotate the cutter to expose a fresh cutting edge. *Fits the Easy Rougher Pro and full-size Easy Rougher *Ci1 R2 2" Radius Carbide Cutter *Razor sharp cutting edge *Mounting screw included *Made in USA

Easy Wood Tools™ proprietary carbide cutters are razor-sharp for an exceptional finish off the screw. When the cutting edge is dull, simply rotate the cutter to expose a fresh cutting edge. *Fits the Easy Rougher Pro and full-size Easy Rougher *Ci1 SQ Square Carbide Cutter *Razor sharp cutting edge *Mounting screw included *Made in USA

Easy Wood Tools™ proprietary carbide cutters are razor-sharp for an exceptional finish off the screw. When the cutting edge is dull, simply rotate the cutter to expose a fresh cutting edge. *Fits the Easy Rougher Pro and full-size Easy Rougher *Ci1 4" Radius Carbide Cutter *Razor sharp cutting edge *Mounting screw included *Made in USA

Easy Wood Tools™ proprietary carbide cutters are razor-sharp for an exceptional finish off the screw. When the cutting edge is dull, simply rotate the cutter to expose a fresh cutting edge. *Fits the Mid-Size Easy Hollower No. 1 No. 2 and No.3 *Ci5 Round Carbide Cutter *Razor sharp cutting edge *Mounting screw included *Made in USA

Easy Wood Tools™ proprietary carbide cutters are razor-sharp for an exceptional finish off the screw. When the cutting edge is dull, simply rotate the cutter to expose a fresh cutting edge. *Fits the Mini and Mid-Size Easy Finisher and Full-size Easy Hollower *Ci3 Round Carbide Cutter *Razor sharp cutting edge *Mounting screw included *Made in USA

Easy Wood Tools™ proprietary carbide cutters are razor-sharp for an exceptional finish off the screw. When the cutting edge is dull, simply rotate the cutter to expose a fresh cutting edge. *Fits the Mini and Mid-size Easy Rougher, and the Easy Pen Turner *Ci2 R2 2" Radius Carbide Cutter *Razor sharp cutting edge *Mounting screw included *Made in USA

A welcome addition to the Easy Wood Tools™ line, the Easy Start Detailer is an ideal beginner tool designed for general shaping, cutting coves, and reaching into tight areas. The razor sharp cutter leaves a super smooth surface on most woods.
What makes the Easy Start Detailer so affordable?
The Easy Start Detailer features a carbon steel shank, oiled Maple handle and steel ferrule making it easy on the pocket. But don’t worry, the Easy Start Detailer is supplied with same premium carbide cutter supplied on the Mini Easy Detailer. Made in USA.
* For small to medium size work on standard and mini lathes * Carbon steel, black oxide finished tool shaft * 9" oiled Maple handle * Includes premium Ci4 Carbide cutter * Tool shank- 3/8" x 4", overall tool length- 13"

A welcome addition to the Easy Wood Tools™ line, the Easy Detailer is an ideal beginner tool designed for general shaping, cutting coves, and reaching into tight areas. The razor sharp cutter leaves a super smooth surface on most woods. *For medium size work *Tool measures: 3/8" x 7" *Uses Ci4 cutter *Made in USA

A welcome addition to the Easy Wood Tools™ line, the Easy Detailer is an ideal beginner tool designed for general shaping, cutting coves, and reaching into tight areas. The razor sharp cutter leaves a super smooth surface on most woods. *For medium and large size work *Tool measures: 1/2" x 8-1/2" *Uses Ci4 Cutter *Made in USA

A welcome addition to the Easy Wood Tools™ line, the Easy Detailer is an ideal beginner tool designed for general shaping, cutting coves, and reaching into tight areas. The razor sharp cutter leaves a super smooth surface on most woods. *For large size work *Tool measures: 1/2" x 8-1/2" *20" Premium American Hickory handle for increased strength, reach and functionality *Uses Ci4 cutter *Made in USA

With the Easy Start Finisher, riding the bevel and complicated bevel angles area thing of the past. Turning projects from beginning to end is a breeze with this incredibly versatile tool. The razor sharp carbide cutter leaves a super smooth surface on most woods. No need to sharpen, simply rotate the cutter to expose a fresh cutting edge as needed and replace when dull. Includes premium Ci3 Round carbide cutter, mounting screw and wrench.
What makes the Easy Start Finisher so affordable?
The Easy Start Finisher features a carbon steel shank, oiled Maple handle and steel ferrule making it easy on the pocket. But don’t worry, the Easy Start Finisher is supplied with same premium carbide cutter supplied on the Mini Easy Finisher. Made in USA.
* For small to medium size work on standard and mini lathes * Carbon steel, black oxide finished tool shaft * 9" oiled Maple handle * Includes premium Ci3 Round Carbide cutter * Tool shank- 3/8" x 4", overall tool length- 13"

A welcome addition to the Easy Wood Tools™ line, the Easy Detailer is an ideal beginner tool designed for general shaping, cutting coves, and reaching into tight areas. The razor sharp cutter leaves a super smooth surface on most woods. *For small medium size work *Tool measures: 3/8" x 4" *11-1/2" Premium maple handle *Uses Ci4 cutter *Made in USA

The Easy Hollower No. 2 is specifically designed for clearing out the intermediate area and sides of the vessel prior to undercutting the rim. *For hollowing intermediate area and sides *Tool measures: 3/8" x 7-1/2" *14" Premium handle *Uses Ci5 carbide cutter Ideal for woodturners of all skill levels, Easy Wood Tools™ Easy Hollowers combine the benefits of the Easy Wood Tools™ razor sharp carbide cutter with a precision milled flat tool shank for stability and strength when turning small hollow forms.

Pen turning from start to finish is a breeze with the Easy Wood Tools™ Easy Pen Turner. No experience required, the Easy Pen Turner eliminates complicated bevel angles and techniques associated with traditional turning tools. The razor sharp carbide cutter produces a near perfect surface on all types of wood, plastics and antler in only minutes. *Tool measures: 3/8" x 4" *11-1/2" Bubinga handle *Uses Ci2 2" radius cutter *Manufactured exclusively for Craft Supplies USA *Made in USA

The Easy Parting Tool is the first ever, replaceable carbide insert parting tool for woodturners. EWT’s innovative approach to tool design means the Easy Parting Tool offers many benefits you won’t find in traditional parting tools.
While regular parting tools tend to flex or tip side-to-side, the Easy Parting Tool lets you make parting cuts with confidence and ease thanks to the wide body tool bar design. This unique wide body design offers ample strength and stability at the base of the tool shaft while the narrower cutting section produces just an 1/8" wide cut. And because the carbide cutter cuts cleaner and stays sharp longer than traditional high-speed steel parting tools, you can enjoy a long lasting cutting edge without the need to sharpen. When dull, simply replace the cutter using the Flex Key (included). Instructions included.
FREE EXTRA CUTTER INCLUDED.
Specifications *Handle: Mid-Size 14" Genuine Maple *Tool Bar Length: 6" *Cutting Blade Length: 2-1/2" *Cutting Blade Width: 3/32" *Cut Width: 1/8" *Maximum Part Off Diameter: 4"

The Easy Start™ Rougher makes rough turning bowl blanks quick and easy. Unlike traditional bowl gouges that can be difficult to control when shaping an out-of-round blank, the Easy Start™ Rougher is designed to direct cutting pressure downward into the lathe so your lathe "takes the beating" for you. There’s no need to sharpen, simply rotate the cutter to expose a fresh cutting edge as needed and replace when dull. Includes premium Ci2 square carbide cutter, mounting screw and wrench.
What makes the Easy Start Rougher so affordable?
The Easy Start Rougher features a carbon steel shank, oiled Maple handle and steel ferrule making it easy on the pocket. But don’t worry, the Easy Start Rougher is supplied with same premium carbide cutter that’s supplied on the Mini Easy Rougher. Made in USA.
* For small to medium size work on standard and mini lathes * Carbon steel, black oxide finished tool shaft * 9" oiled Maple handle * Includes premium Ci2 square carbide cutter * Tool shank- 3/8" x 4", overall tool length- 13"

The Easy Hollower No. 3 is designed for undercutting the sides and rim of the vessel while leaving a smooth finished surface. *For undercutting sides and rim *Full-Size tool measures: 1/2" x 9-1/2" with 16" handle *Mid-Size tool measures: 3/8" x 7-1/2" with 14" handle *Mid-Size tool uses Ci5 carbide cutter *Full-Size tool uses Ci3 carbide cutter Ideal for woodturners of all skill levels, Easy Wood Tools™ Easy Hollowers combine the benefits of the Easy Wood Tools™ razor sharp carbide cutter with a precision milled flat tool shank for stability and strength when turning small hollow forms.

Adapt your 1"-8TPI threaded Easy Wood Tools™ Easy Chuck™ to fit a 1-1/4"-8TPI spindle with this precision machined Easy Wood Tools™ Spindle Adapter. *Precision machined steel *Made in USA *Adapt 1"-8TPI threaded Easy Chuck™ to fit a 1-1/4"-8TPI spindle

With the Mid-Size Easy Finisher, riding the bevel and complicated bevel angles are a thing of the past. Many projects can be turned from beginning to end with this incredibly versatile tool. The razor sharp carbide cutter leaves a super smooth surface on most woods. To use, simply hold the Mid-Size Easy Finisher in a horizontal position with the cutter aligned with the center of the work piece and cut away, it’s that easy! There’s no need to sharpen, simply rotate the cutter to expose a fresh cutting edge as needed and replace when dull. Includes premium Ci3 round carbide cutter, mounting screw and wrench and instructions. Made in USA
* For small to medium size work on standard lathes * Milled stainless steel shaft * 14" Maple handle * Includes premium Ci3 round cutter * Tool shank: 3/8" x 7", overall tool length: 21" * Optional Chip Deflector available for blocking wood chips * Made in USA

With the Easy Finisher, riding the bevel and complicated bevel angles are a thing of the past. Many projects can be turned from beginning to end with this incredibly versatile tool. The razor sharp carbide cutter leaves a super smooth surface on most woods. To use, simply hold the Easy Finisher in a horizontal position with the cutter aligned with the center of the work piece and cut away, it’s that easy! There’s no need to sharpen, simply rotate the cutter to expose a fresh cutting edge as needed and replace when dull. Includes premium Ci0 round carbide cutter, mounting screw and wrench and instructions. Made in USA
* For medium to large size work on standard lathes * Milled stainless steel shaft * 16" Maple handle * Includes premium Ci0 round carbide cutter * Tool shank: 1/2" x 8-1/2", overall tool length: 24-1/2" * Optional Chip Deflector available for blocking wood chips * Made in USA

With the Pro Easy Finisher, riding the bevel and complicated bevel angles are a thing of the past. Many projects can be turned from beginning to end with this incredibly versatile tool. The razor sharp carbide cutter leaves a super smooth surface on most woods. The extra long 20" solid American Hickory handle provides additional leverage when needed. To use, simply hold the Pro Easy Finisher in a horizontal position with the cutter aligned with the center of the work piece and cut away, it’s that easy! There’s no need to sharpen, simply rotate the cutter to expose a fresh cutting edge as needed and replace when dull. Includes premium Ci0 carbide cutter, mounting screw and wrench and instructions. Made in USA
* For medium to large size work on standard lathes * Milled stainless steel shaft * 20" premium American Hickory handle for additional leverage * Includes premium Ci0 round carbide cutter * Tool shank: 1/2" x 8-1/2", overall tool length: 28-1/2" * Optional Chip Deflector available for blocking wood chips * Made in USA

With the Mini Easy Finisher, riding the bevel and complicated bevel angles are a thing of the past. Many projects can be turned from beginning to end with this incredibly versatile tool. The razor sharp carbide cutter leaves a super smooth surface on most woods. To use, simply hold the Mini Easy Finisher in a horizontal position with the cutter aligned with the center of the work piece and cut away, it’s that easy! There’s no need to sharpen, simply rotate the cutter to expose a fresh cutting edge as needed and replace when dull. Includes premium Ci3 round carbide cutter, mounting screw and wrench and instructions. Made in USA
* For small size work on standard and mini lathes * Milled stainless steel shaft * 11 1/2" Maple handle * Includes premium Ci3 round cutter * Tool shank: 3/8" x 4", overall tool length: 15-1/2" * Optional Chip Deflector available for blocking wood chips * Made in USA

The Mid-Size Easy Rougher makes rough turning bowls to shape quick and easy. Unlike traditional bowl gouges that can be difficult to control when shaping an out-of-round blank, the Mid-Size Easy Rougher is designed to direct the cutting pressure downward through the lathe so your lathe "takes a beating" for you. To use, simply hold the Mid-Size Easy Rougher in a horizontal position with the cutter aligned with the center of the work piece and cut away, it’s that easy! There’s no need to sharpen, simply rotate the cutter to expose a fresh cutting edge as needed and replace when dull. Includes premium Ci2 SQ square carbide cutter, mounting screw and wrench and instructions. Made in USA. * For small to medium size work on standard and mini lathes * Milled stainless steel shaft * 14" Maple handle * Includes premium Ci2 SQ square cutter * Tool shank: 3/8" x 7", overall tool length: 21" * Optional Chip Deflector available for blocking wood chips * Made in USA

The Easy Rougher makes rough turning bowls to shape quick and easy. Unlike traditional bowl gouges that can be difficult to control when shaping an out-of-round blank, the Easy Rougher is designed to direct the cutting pressure downward through the lathe so your lathe "takes a beating" for you. To use, simply hold the Easy Rougher in a horizontal position with the cutter aligned with the center of the work piece and cut away, it’s that easy! There’s no need to sharpen, simply rotate the cutter to expose a fresh cutting edge as needed and replace when dull. Includes premium Ci1 R4 carbide cutter, mounting screw and wrench and instructions. Made in USA * For medium to large size work on standard lathes * Milled Stainless steel shaft * Includes premium Ci1 R4 carbide cutter * Tool shank: 1/2" x 8" * Optional Chip Deflector available for blocking wood chips * Made in USA

The Pro Easy Rougher makes rough turning bowls to shape quick and easy. Unlike traditional bowl gouges that can be difficult to control when shaping an out-of-round blank, the Easy Rougher is designed to direct the cutting pressure downward through the lathe so your lathe "takes a beating" for you. The extra long 20" American Hickory handle provides additional leverage when needed. To use, simply hold the Easy Rougher in a horizontal position with the cutter aligned with the center of the work piece and cut away, it’s that easy! There’s no need to sharpen, simply rotate the cutter to expose a fresh cutting edge as needed and replace when dull. Includes premium Ci1 R4 4" Radius carbide cutter, mounting screw and wrench and instructions. Made in USA * For medium to large size work on standard lathes * Milled Stainless steel shaft * 20" premium American Hickory handle for additional leverage * Includes premium Ci1 R4 4" radius carbide cutter * Tool shank: 1/2" x 8-1/2"", overall tool length: 28-1/2" * Optional Chip Deflector available for blocking wood chips * Made in USA

The Mini Easy Rougher makes rough turning bowls to shape quick and easy. Unlike traditional bowl gouges that can be difficult to control when shaping an out-of-round blank, the Mini Easy Rougher is designed to direct the cutting pressure downward through the lathe so your lathe "takes a beating" for you. To use, simply hold the Mini Easy Rougher in a horizontal position with the cutter aligned with the center of the work piece and cut away, it’s that easy! There’s no need to sharpen, simply rotate the cutter to expose a fresh cutting edge as needed and replace when dull. Includes premium Ci2 SQ square carbide cutter, mounting screw and wrench and instructions. Made in USA * For small size work on standard and mini lathes * Milled stainless steel shaft * 11 1/2" Maple handle * Includes premium Ci2 SQ square cutter * Tool shank: 3/8" x 4", overall tool length: 15-1/2" * Optional Chip Deflector available for blocking wood chips * Made in USA

The new and improved Easy Chuck, from Easy Wood Tools, is the most innovative woodturning chuck since the introduction of the 4-jaw scroll chuck. The Easy Chuck features a revolutionary Snap-Lock jaw design that eliminates tedious jaw screws allowing you to change jaws in less than 30 seconds! With jaw changes this fast, you don't need to dedicate a chuck body for each of your most-used jaw setups. Simply insert the included hex wrench into the hole located in the jaw and press to unlock the jaw from the slide. To install, slide the jaw into the slide groove. When you hear the snap, the jaw is locked in place and ready to go!
Another Easy Wood Tools innovation is the Zoom-Ring that allows you to quickly open and close the jaws with your fingertips. Simply rotate the Zoom-Ring on the chuck body to adjust the jaws until they contact the work piece, then apply final tightening pressure with the included chuck key. The new Double-ended Wood Worm Screw provides a 1/2" diameter thread-cutting screw for turning larger blanks and a smaller 3/8" diameter screw for holding smaller blanks.
In the tradition of Easy Wood Tools, the Easy Chuck makes woodturning easier than ever and is built to last a lifetime. *Snap-Lock technology allows you to change jaw sets in less than 30 seconds! *Patent-pending Zoom Ring for rapid jaw adjustment *Precision machined components throughout *2" Dovetail jaws included (2-1/8" max expansion, 1-3/8" min compression) *Jaw corners are rounded for improved safety and coated for corrosion resistance *Accessory jaws available *Craft Supplies USA Exclusive Lifetime Guarantee *Made in the USA Includes: 1-3/8" / 2" Dovetail Jaws Double-ended Woodworm Screw 5/16" T-handle Chuck Key 1/8" Jaw Hex Ball Driver Spindle Washer Spare Jaw Springs Spare Hub Set Screws Owners Manual

Easy Wood Tools™ Anodized Aluminum Faceplates are precision machined from high grade aluminum and are guaranteed to meet the needs of the most demanding woodturners. *Anodized aluminum won’t rust or transfer stains *Shorter overall length provides greater working area while reducing vibrations *8 Large screw holes accommodate larger screws for increased holding power *5/16" Spanner hole allows for easy removal with lever bar *Lever bar not included *1"-8 TPI

Easy Wood Tools™ Anodized Aluminum Faceplates are precision machined from high grade aluminum and are guaranteed to meet the needs of the most demanding woodturners. *Anodized aluminum won’t rust or transfer stains *Shorter overall length provides greater working area while reducing vibrations *8 Large screw holes accommodate larger screws for increased holding power *5/16" Spanner hole allows for easy removal with lever bar *Lever bar not included *1-1/4"-8 TPI

by Michael O'Donnell Turning green wood has been O'Donnell's specialty since 1981. Thisbook shows how to make six projects from green wood, fresh from the log. Using cross grain and end-grain techniques, the stunning close-up shots show how he turns thin translucent bowls, some with natural edged rims. Also shown is turning a functional bowl using microwave drying before finishing it. *135 pages *Soft Cover

For small projects up to 5" diameter With the Easy Wood Tools™ Easy Chuck™ changing an entire set of jaws takes about 30 seconds.  Easy Wood Tools™ patent-pending Snap-Lock Technology eliminates the need to remove jaw slides and jaw screws saving you time and money.  Simply insert the small t-handle wrench into the small hole located in the jaw and press to unlock the jaw from the jaw slide.  To install, simply slide the jaw into the chuck.  When you hear the snap, the jaw is locked in place and ready to go! *Compression range: 1/2" - 1-11/16" *Expansion range: 1-1/4" - 2-7/16" *Quick and Easy:  No changing screws or removing jaw slides *Safety Corners: Rounded corners of the top jaws reduce chance of injury to knuckles *Durable Components: Easy Jaw components are hardened and corrosion resistant for extreme durability.

For bowls and platters up to 6" diameter. With the Easy Wood Tools™ Easy Chuck™ changing an entire set of jaws takes about 30 seconds.  Easy Wood Tools™ patent-pending Snap-Lock Technology eliminates the need to remove jaw slides and jaw screws saving you time and money.  Simply insert the small t-handle wrench into the small hole located in the jaw and press to unlock the jaw from the jaw slide.  To install, simply slide the jaw into the chuck.  When you hear the snap, the jaw is locked in place and ready to go! *Compression range: 1-3/8" - 2-7/16" *Expansion range: 2" - 3-3/16" *Quick and Easy:  No changing screws or removing jaw slides *Safety Corners: Rounded corners of the top jaws reduce chance of injury to knuckles *Durable Components: Easy Jaw components are hardened and corrosion resistant for extreme durability.

For bowls and platters up to 20" diameter. With the Easy Wood Tools™ Easy Chuck™ changing an entire set of jaws takes about 30 seconds.  Easy Wood Tools™ patent-pending Snap-Lock Technology eliminates the need to remove jaw slides and jaw screws saving you time and money.  Simply insert the small t-handle wrench into the small hole located in the jaw and press to unlock the jaw from the jaw slide.  To install, simply slide the jaw into the chuck.  When you hear the snap, the jaw is locked in place and ready to go! *Compression range: 2-1/2" - 4-1/2" *Expansion range: 4" - 5-1/4" *Quick and Easy:  No changing screws or removing jaw slides *Safety Corners: Rounded corners of the top jaws reduce chance of injury to knuckles *Durable Components: Easy Jaw components are hardened and corrosion resistant for extreme durability.

With the Easy Wood Tools™ Easy Chuck™ changing an entire set of jaws takes about 30 seconds.  Easy Wood Tools™ patent-pending Snap-Lock Technology eliminates the need to remove jaw slides and jaw screws saving you time and money.  Simply insert the small t-handle wrench into the small hole located in the jaw and press to unlock the jaw from the jaw slide.  To install, simply slide the jaw into the chuck.  When you hear the snap, the jaw is locked in place and ready to go! *Quick and Easy:  No changing screws or removing jaw slides *Safety Corners: Rounded corners of the top jaws reduce chance of injury to knuckles *Durable Components: Easy Jaw components are hardened and corrosion resistant for extreme durability. 2-3/8" Jaws Specifications: For bowls and platters up to 12" diameter. Compression range: 2-3/8" - 3-3/8" Expansion range: 3" - 4-3/16"
3-1/2" Jaws Specifications: For bowls and platters up to 24" diameter. Compression range: 3-1/2" - 4-7/16" Expansion range: 4-3/16" - 5-3/8"

EWT’s Big Easy Jaws are just the ticket for re-chucking bowls for final shaping and finishing. Some of the advantages of being able to re-chuck a bowl include: light turning for shaping, removing damaged wood left by the chuck and customizing the base for just the right look.
Big Easy Jaws are supplied with tapered non-marking urethane grippers that hold the work securely in place. Not only are these jaws capable of gripping the interior of reverse curve bowls as well as the exterior of open form bowls, the full range of gripper mounting holes let you position them as needed to fit almost any size bowl.
As with all Easy Chuck accessories, Big Easy Jaws utilize Snap-Lock technology for fast jaw changing. Choose from a 12" model for smaller lathes or 16" model for larger lathes. With the optional 20" Big Easy Extensions, you can grip bowls up to 20" in diameter. And, if you’re in need of additional gripping surface or longer reach, the optional 2" Easy Reach Grippers will help you get the job done.
12" Jaw Specifications Compression: 3" - 10" Expansion: 5" - 12"
16" Jaw Specifications Compression: 3" - 14" Expansion: 5" - 16"
Includes: *Jaw plates *8 grippers *Mounting screws

Deft® Clear Wood Finish is a semigloss, brushable lacquer that will give a crystal-clear finish and won't darken or yellow with age. It will seal and finish. It won't skin over or harden in the can, but will dry in 30 minutes with recoat in 2 hours. We have found a special use for Deft in finishing woodturning. It can be used as the complete finish, or in combination with oil finishes, to produce the low sheen, in-the-wood finish desired by many woodturners. We use this finishing method in our workshops, and it is used on most of the turnings produced by Dale Nish and his students. 1 quart

With the optional 20" Big Easy Extensions, you can grip bowls up to 20" in diameter. *Requires 16" Big Easy Jaws for use.

If you’re in need of additional gripping surface or longer reach, the optional 2" Easy Reach Grippers will help you get the job done.

with Binh Pho Follow along as Binh Pho creates three basic types of thin wall vessels used for decorating- the Thin Wall Vessel, the Open Vessel and the Winged Vessel. Everything you need to know is discussed, including selecting suitable material, proper turning and hollowing techniques, (including an overview of several hollow turning systems available today) along with shear scraping and finishing techniques which are covered in detail. Other items demonstrated include using light to measure wall thickness, drilling to verify thickness and other "tips" to help you create the best work possible. *86 minutes