Replace a lost or damaged chuck key with a genuine Vicmarc® Replacement Chuck Key.

Considered by many to be the finest woodturning chucks on the market, Vicmarc chucks have long enjoyed a reputation for quality and dependability. This 5" VM120 Chuck is recommended for use on 16-24" capacity lathes. With appropriate accessory jaws this chuck is suitable for use on larger lathes.
*Includes: 4 mm & 10 mm t-handle tightening keys, insert lever and threaded insert

The 3-1/2" Vicmarc VM100 Chuck is recommended for use on 8-12" capacity lathes. With appropriate accessory jaws this chuck is suitable for use on 16" capacity lathes.
*Precision machined *One-hand tightening *Key operated *No-Lock Spindle Washer prevents chuck and spindle from sticking together Specifications: Chuck size: 3-1/2"
Includes: Jaw Screws (8) 3mm and 8mm T-handle Tightening Keys Threaded Insert Insert Lever No-Lock Spindle Washer
Considered by many to be the finest woodturning chucks on the market, Vicmarc chucks have long enjoyed a reputation for quality and dependability.
Precision machined Vicmarc chucks provide smooth operation, superb accuracy, and overall quality unsurpassed by any other brand of chuck. Key operated Vicmarc chucks offer one-hand tightening for convenience while providing mazimum holding power with minimal effort. With a wide range of jaws and accessories to choose from, you can build a superior chucking system to suit your needs.

Considered by many to be the finest woodturning chucks on the market, Vicmarc chucks have long enjoyed a reputation for quality and dependability. This 5" VM120 Chuck is recommended for use on 16-24" capacity lathes. With appropriate accessory jaws this chuck is suitable for use on larger lathes.
*Includes: 2-1/2" dovetail jaw set, woodworm screw, 4 mm & 10 mm t-handle tightening keys, insert lever and threaded insert

The 3-1/2" Vicmarc VM100 Chuck is recommended for use on 8-12" capacity lathes. With appropriate accessory jaws this chuck is suitable for use on 16" capacity lathes.
*Precision machined *One-hand tightening *Key operated *No-Lock Spindle Washer prevents chuck and spindle from sticking together *Quality Vicmarc 2" Dovetail Jaw Set Specifications: Chuck size: 3-1/2" Jaw Compression Range: 1-1/4"- 2-3/4" Jaw Expansion Range: 1-3/4" - 3-1/4"
Includes: 2" (50mm) Dovetail Jaw Set Woodworm Screw Jaw Screws (8) 3mm and 8mm T-handle Tightening Keys Threaded Insert Insert Lever No-Lock Spindle Washer
Considered by many to be the finest woodturning chucks on the market, Vicmarc chucks have long enjoyed a reputation for quality and dependability.
Precision machined Vicmarc chucks provide smooth operation, superb accuracy, and overall quality unsurpassed by any other brand of chuck. Key operated Vicmarc chucks offer one-hand tightening for convenience while providing mazimum holding power with minimal effort. With a wide range of jaws and accessories to choose from, you can build a superior chucking system to suit your needs.

Every woodturner will enjoy the hassle-free operation of this top quality Turners Select™ 1/2" Keyless Drill Chuck. Keyless chucks not only eliminate the frustration of lost chuck keys, they are fast acting, accurate, and hold the drill bit securely in place.

Hold pen mandrels, bottle stoppers, finials and other small work without marking or marring the wood's surface with Beall® Chuck Collets. *ER-32 collet *Precision ground collets for accuracy

Hold pen mandrels, bottle stoppers, finials and other small work without marking or marring the wood’s surface with the Beall® Collet Chuck. *Requires collet for use *5 sizes of collets to choose from *1/32" range of movement *Precision ground collets for accuracy *Uses ER-32 type collets

Re-chucking bowls and platters for finishing or light shaping has never been easier. The RMWoodCo™ Modern Longworth Chuck’s self-centering scroll operation quickly adjusts to fit the work and tightening takes only a few seconds. Designed for clamping in a traditional 4-jaw self-centering chuck using standard dovetail jaws, the Modern Longworth Chuck eliminates the time and hassle of removing and remounting chuck jaws required by regular re-chucking jaws. *Non-Marking premium red silicone grippers provide pliable yet firm gripping power *Precision cut, premium 1/4" thick phenolic plates provide ultimate performance and reliability *Chuck adapter plates are produced from high carbon tool steel for exceptional strength and stability *Interchangeable precision axle system allows you to change the chuck’s interface plate to fit your desired jaw size *Chucks supplied with 2-1/4" chuck adapter for use with #2 jaws unless otherwise noted *20" Chuck supplied with 4-1/4" chuck adapter for use with #3 jaws *600 RPM maximum *Standard 4-jaw scroll chuck required for use *Chuck size indicates the minimum lathe swing for which it is intended *Maximum external gripping capacity is approximately 2" smaller than chuck diameter *Made in USA
Note: Will not work with any Oneway profiled jaw set.

The Turners Select™ 1/2" Key Drill Chuck is one of the most useful accessories for the lathe. It enables the lathe to perform many of the functions of a drill press, with the key chuck holding tool bit shanks up to 1/2" diameter. It allows the turner to use twist drills, spade bits, and forstner bits to bore vases, tool handles, lamps, etc., as well as depth holes in bowls. A quality chuck at an economy price.

This simple 4" Axminster™ Eccentric Chuck System and spiraling attachment helps you broaden your horizons by creating off-center turnings limited only by your imagination. The basic chuck will operate on any expanding chuck using 2-3/4" diameter dovetail jaws and features incremental holes in the face of the chuck that allow you to quickly change the axis of the work by rotating the mounting disc. Additional off center mounting holes allow you to further increase the off center effect by remounting the work. The spiraling attachment allows you to turn projects such as goblets and candle holders with an offset or spiraled stem. Instructions included. For ideas on eccentric turning, see Dick Sings "Projects for the Mini Lathe" book.

The Turners Select Drawbar Collet Chuck is an inexpensive quality chucking system for turning small projects like spinning tops, birdhouse finials and similar items where accuracy and tool accessibility are a priority. Many professional pen turners prefer using a drawbar collet chuck for holding pen mandrels as it eliminates the risk of off-center pen barrels and project tubes so you get the very best results possible.
To prevent injury, the theaded rod must be cut to length before powering on your lathe. Simply install the drawbar system on your lathe while it is unplugged, then cut the rod with a hacksaw so no more than 2" of rod extends past the collet chuck handwheel. Remove any sharp burrs with a file.
Available exclusively from Craft Supplies USA.
*Low profile design for greater tool access *Quick and easy to operate *Most accurate way to drive project mandrels *Eliminates off-center barrels that look and fit poorly *Won’t work loose while working *Steel tightening knob *Fits No. 2MT lathe spindles

The Vicmarc® VM150 Dual-Action Mega Chuck was designed from the ground up to be the strongest, most secure chucking system in the world for large capacity lathes. The VM150 Dual-Action Mega Chuck allows you to operate the chuck in two different modes via the selector lever on the backside of the chuck. In lever operation mode, the chuck rapidly opens, closes and tightens using levers. In key operation mode, opening, closing and tightening is done using the T-Handle. This allows for one hand operation and provides maximum gripping power. With a simple flip of the selector lever, you can quickly change the mode of operation without removing the chuck from the lathe. *Extra large 6" diameter *Heavy-duty construction *Dual-action, lever and key operation *Precision machining throughout *Smooth, dependable operation *Larger, heavier duty jaw slides *Larger range of movement *Stop pin to limit jaw exposure *Durable nickel plating to prevent rust *Accepts all VM120 chuck jaws *5 year warranty
Includes: insert lever, woodworm screw, jaw screws, 4 mm and 10 mm t-handle tightening keys, and threaded insert.

Our top quality rotary vacuum chuck adapter offers simplicity and performance at a fraction of the price of other vacuum chuck adapters.
Manufactured in the USA from aircraft grade aluminum, our Precision Machine Rotary Vacuum Chuck Adapter features a dual-thrust bearing for dependable operation and accepts quick coupler air fittings. Designed to slide directly inside the headstock spindle, there’s no need for threaded adapters so you can leave the hand wheel on the lathe during use! Backed by our 100% Satisfaction Guarantee.
*Costs only a fraction of other rotary vacuum chuck adapters *2 sigle row, dual thrust bearings for long life *Slides into headstock spindle *Machined from aircraft grade aluminum *O-rings provide airtight seal *No need to remove hand wheel during use *Threaded to accept air fitting quick coupler (not included) Includes Body Stem

Adapt your RMWoodCo™ Modern Longworth Chuck to fit a different set of jaws with the Modern Longworth Chuck Adapter.

Vacuum chucking is a very popular method of mounting bowls on the lathe for light turning and finishing without marking or marring the suface of the work. The Hold Fast™ 6" Vacuum Chuck System runs off of a standard shop air compressor using the V812 Vacuum Generator. The Hold Fast™ System offers simplicity, dependability, and peformance for half the price of other vacuum chuck systems. *Easy and affordable vacuum chuck system *Finish bowls and platters without leaving marks *Simple, dependable performance *Requires air compressor for use (minimum 2.5 cfm at 55-65 psi) *Includes: V812 Vacuum generator, 6" vacuum chuck head, vacuum adapter, 60" of vacuum seal cord

Made of fiberglass reinforced nylon, the Hold Fast™ 6" Vacuum Chuck Head features a machined aluminum threaded collar for strength. Closed-cell foam o-rings guarantee a positive seal to hold the work firmly while providing a small amount of give that prevents the work from coming loose in the event of a minor tool catch. Made in USA.

Made of fiberglass reinforced nylon, the Hold Fast™ 8" Vacuum Chuck Head features a machined aluminum threaded collar for strength. Closed-cell foam o-rings guarantee a positive seal to hold the work firmly while providing a small amount of give that prevents the work from coming loose in the event of a minor tool catch. Made in USA.

Replace the threaded insert on your Vicmarc® VM100 Chuck with a genuine Vicmarc® VM100 Chuck Threaded Insert.

If you’re looking for accuracy and affordability in a single package, the Apprentice™ Collet Chuck is an excellent choice. Precision machined to hold small work such as pen mandrels, bottle stoppers, and finials without marking or damaging the work. Featuring a large knurled ring for convenient hand tightening that’s sufficient in most cases, and collets with 1/32" range of movement. Includes body, tightening ring, spindle adapter, tightening levers, and 5 ER-32 precision collets. *Includes: 1/4", 3/8", 1/2", 5/8", 3/4" ER-32 Collets *Available in 1–1/4"–8tpi with 1"–8tpi spindle adapter or 1"–8tpi with 3/4"–16tpi spindle adapter *Includes durable molded plastic storage case

Replace the threaded insert on your Vicmarc® VM120 or VM150 Chuck with a genuine Vicmarc® VM120/VM150 Chuck Threaded Insert.

Hold pen mandrels, bottle stoppers, finials and other small work without marking or marring the wood’s surface with the Beall® Collet Chuck. *Requires collet for use *1/32" range of movement *Precision ground collets for accuracy *Uses ER-32 type collet *Includes: collet chuck, and 5 collets (1/4", 3/8", 1/2", 5/8", 3/4")

Made of fiberglass reinforced nylon, the Hold Fast™ 3-1/2" Vacuum Chuck Head features a machined aluminum threaded collar for strength. Closed-cell foam o-rings guarantee a positive seal to hold the work firmly while providing a small amount of give that prevents the work from coming loose in the event of a minor tool catch. *Outside diameter: 3-1/2" *Made in USA.

The Vicmarc® 5" Dovetail Jaw Set fits VM100, VM120 and VM150 Chucks and is capable of chucking bowls by clamping down on a foot or tenon using the jaw's interior dovetail or expanding into a dovetail recess with the jaw's exterior dovetail. *Durable machined steel *Black oxide finish
*VM100 Chuck Jaw Set Compression range: 5" - 6-1/2" Expansion range: 5-5/8" - 7-1/8"
*VM120/VM150 Chuck Jaw Set Compression range: 4-1/8" - 5-7/8" Expansion range: 5" - 6-3/4"

Set of 8 replacement grippers with hardware for the RMWoodCo™ Modern Longworth Chuck.

The Vicmarc® Extended Dovetail Jaw Set fits VM100, VM120 and VM150 Chucks and can be used for traditional chuck using the exterior dovetail while providing the benefit of moving the work away from the headstock for more working room. Ue these jaws in expansion mode for chucking pre-drilled stock such as pepper mills, vases, and kaleidoscopes. *Durable machined steel *Black oxide finish
*VM100 Chuck Compression range: 1/4" - 1-13/16" Expansion range: 1-9/32" - 2-7/8"
*VM120/VM150 Chuck Compression range: 1/4" - 1-25/64" Expansion range: 1-5/16" - 2-15/32"

The Vicmarc® Pin Jaw Set fits VM100, VM120 & VM150 Chucks and features a 1" spigot design that's ideal for use on pre-drilled work such as small boxes and pepper mills where extended reach is important. *Durable machined steel *1" Spigot design for extended reach *Black oxide finish\
*VM100 Chuck Jaw Set Compression range: 1/4" - 1-3/4" Expansion range: 1" - 2-3/8"
*VM120/VM150 Chuck Jaw Set Compression range: 1/4" - 1-3/4" Expansion range: 7/8" - 2-3/8"

The Vicmarc® Step Jaw Set fits VM100, VM120 and VM150 Chucks and can be used to grip different diameters of stock using the steps inside the jaw or to expand into a dovetail recess using the exterior dovetail. *Durable machined steel *Black oxide finish
*VM100 Chuck Jaw Set Compression range: 1-3/4" - 4-3/4" Expansion range: 3-7/8" - 5-3/8"
*VM120/VM150 Chuck Jaw Set Compression range: 2" - 6-1/8" Expansion range: 5" - 6-3/4"

Without a doubt, these are the finest adjustable jaws on the market. The Vicmarc® 14" Adjusta-Jaw Set fits Vicmarc® VM100, VM120, and VM150 Chucks and is designed for holding work while making light finishing cuts or sanding the bottom of bowls and platters. *Premium four-sided, concave soft plastic grippers provide full contact with the workpiece *Durable machined aluminium *Fits lathes with 20" capacity
*VM100 Chuck Jaw Set Compression range: 4" - 14-1/2" Expansion range: 6-1/4" - 16-1/2"
*VM120/VM150 Chuck Jaw Set Compression range: 4" - 14-3/4" Expansion range: 6-1/4" - 16-1/2"

The Vicmarc® 1-3/8" Shark Jaw Set fits VM100, VM120 and VM150 Chucks and can be used as traditional dovetail jaws or to clamp down on a tenon. Serrated ridges along the interior and exterior of the jaw provide an aggressive grip. *Durable machined steel *Black oxide finish
*VM100 Chuck Jaw Set Compression range: 1-3/8" - 2-7/8" Expansion range: 1-7/8" - 3-3/8"
*VM120/VM150 Chuck Jaw Set Compression range: 1-3/8" - 3" Expansion range: 2-1/8" - 3-7/8"

Without a doubt, these are the finest adjustable jaws on the market. The Vicmarc® 10" Adjusta-Jaw Set fits Vicmarc® VM100, VM120, and VM150 Chucks and is designed for holding work while making light finishing cuts or sanding the bottom of bowls and platters. *Premium four-sided, concave soft plastic grippers provide full contact with the workpiece *Durable machined aluminium *Fits lathes with 16" capacity
*VM100 Chuck Jaw Set Compression range: 3-1/2" - 10-5/8" Expansion range: 5-3/4" - 12-1/2"
*VM120/VM150 Chuck Jaw Set Compression range: 3-1/2" - 10-3/4" Expansion range: 5-3/4" - 12-1/2"

The Vicmarc® 1-3/4" Shark Jaw Set fits VM100, VM120 and VM150 Chucks and can be used as traditional dovetail jaws or to clamp down on a tenon. Serrated ridges along the interior and exterior of the jaw provide an aggressive grip. *Durable machined steel *Black oxide finish
*VM100 Chuck Jaw Set Compression range: 1-5/8" - 3-1/8" Expansion range: 2-1/8" - 3-1/2"
*VM120/VM150 Chuck Jaw Set Compression range: 1-7/8" - 3-5/8" Expansion range: 2-5/8" - 4-3/4"

The Vicmarc® Long Nose Jaw Set fits VM100, VM120 and VM150 Chucks and is designed to get the workpiece away from the headstock. These long nose jaws are capable of holding heavy work and can be used in either an expanding or contracting dovetail mode. They are also ideal for gripping round stock. *Durable machined steel *Black oxide finish
*VM100 Chuck Compression range: 7/8" - 1-3/8" Expansion range: 1-1/4" - 3"
*VM120/VM150 Chuck Compression range: 1-1/8" - 2-7/8" Expansion range: 1-3/4" - 3-5/8"

The most accurate way to drill a pen or project blank is on your lathe. With Vicmarc Pen Blank Drilling Jaws, you can confidently drill blanks knowing you’ll get an accurate, centered hole every time. Drilling pressure is easily controlled using the tailstock handwheel, virtually eliminating exit hole breakout that’s common to plastics. *Most accurate way to drill pen and project blanks *Controlled drilling pressure eliminates exit hole break-out *V-groove design securely grips and supports blank on all 4 sides *Grips blanks from 7/16" to 1-7/8" diameter *Designed for use on Vicmarc brand chucks *Available for VM90/100 and VM120/150 chucks
Note: Drilling on the lathe requires that the headstock and tailstock be accurately aligned otherwise an oversize hole may result when drilling. For drilling only, not for use when turning.

This adhesive backed foam seal is highly recommended for use with vacuum chucks as it’s easy to apply and provides an airtight seal. It also works well as a non-marking pad material for jam chucks. It can be cut and trimmed as needed using standard scissors.
The pressure sensitive peel-off backing makes application easy and eliminates the need for messy spray adhesive.
*Measures 9" x 12" x 2mm thick

Replace worn or damaged grippers on your Vicmarc® Adjusta-Jaw Set with the Vicmarc® Adjusta-Jaw Replacement Gripper Set. *Includes 8 replacement grippers

Plastic nylon RMWoodCo™ Rim Rings protect delicate platter rims from scratches and marks during reverse chucking on the Modern Longworth Chuck. *Protects the rim of any platter or bowl by raising it slightly off the surface of the chuck *Prevents marking and marring on rim’s surface *Easy to use, simply slide over each gripper on the chuck *Durable plastic nylon material *For use on Modern Longworth Chuck *Includes 8 Rim Rings

These replacement collets are designed for use with our Turners Select Drawbar Collet Chuck system. *No. 2MT *Requires drawbar for use

Make your own vacuum chuck jigs and fixtures to attach to the Hold Fast™ Vacuum Chuck Head using MDF particle board and Vacuum Seal Cord. Made of closed cell foam, this material can be cut to length and super-glued together to form a ring then to be set into a wooden disc. Supplied in 60" length.

8 Jaw screws for Vicmarc VM100 Chuck

Precision machined from solid aluminum, each Oneway® 5-1/2" Vacuum Cylinder includes forming plate, glue ring, neoprene seal, hardware pack, threaded adapter and instructions.

The Hold Fast™ V812 Vacuum Generator features a built-in regulator that allows you to adjust the incoming pressure from the air supply, eliminating the hassle of readjusting the air compressor when vacuum chucking.
Innovative and affordable, this vacuum generator utilizes a dual-venturi system within the generator to generate approx. 25" with compressed "air in" at 85 psi and approx. 21" at 70 psi. This can vary, depending on altitude and barometric pressure. Higher pressure up to 95 psi results in greater vacuum volume.
The large, easy to read vacuum dial indicates how much vacuum is being created while the convenient on/off lever allows you to adjust the amount of vacuum by adjusting the amount of airflow. Although the amount of vacuum created is affected by altitude, porosity of the wood and the seal between the bowl and the chuck, the Hold Fast system is guaranteed to hold your work firmly in place at all times.
*Supplied with a male quick disconnect fitting to accommodate standard air hose couplers *Includes flexible air hose for attaching to vacuum generator *Requires the Vacuum Chuck Adapter Kit for use with the Vacuum Chuck Head Note: Air leakage from the on/off switch is normal during operation.

Designed to mount inside the outboard side of the headstock spindle, the Hold Fast™ Vacuum Adapter kit features alluminum connectors mounted on a hollow threaded rod that anchor the adapter securely in place while preventing air leaks during operation. A Rotary bearing connector on the end of the adapter lets the lathe spindle turn freely while the hose and connection remain stationary. *New and improved design *3/8" x 18" Plated steel rod can be cut to length *Extra diaphragm bearing seal *Locking spindle adapter with rubber O-ring *Fits #2MT *Air hose required (not included) *Not compatible with Laguna Revo 18|36 (shaft is too short)

The Oneway® Rotary Adapter mounts on the outboard spindle of the lathe and connects to a vacuum hose. The rotary adapter lets the lathe spindle turn freely while the hose and connection remain stationary. *Includes threaded adapter *Please specify the outboard spindle size of your lathe when ordering *Requires the use of a vacuum pump

Precision machined from solid aluminum, each Oneway® 3-1/2" Vacuum Cylinder includes forming plate, glue ring, neoprene seal, hardware pack, threaded adapter and instructions.

This inline Gast® Vacuum Gauge Kit allows you to monitor and control the amount of vacuum being used. Consists of pressure gauge, bleeder valve, mounting bracket, hardware, and 6' of air hose for use with the E-Z Vacuum Adapter or Oneway Rotary Adapter.

Turn your own custom jam chucks, jigs and fixtures with a Turners Select™ Nylon Chucking Blank that won’t shrink or crack. *Non-marking rim rings won’t mark or damage turnings *Durable Nylon Plastic won’t shrink or warp overtime *Easy to Turn nylon won’t dull or damage tools *Reshape rod for multiple uses *Unlimited options for woodturners *2" Diameter

Ensure a secure and tight seal on the workpiece with a new Oneway® Vacuum Cylinder Neoprene Seal. *Sold as pack of 5

We recommend the Gast® Vacuum Pump for use with the E-Z Vacuum Adapter and Oneway Rotary Adapter. This vacuum pump has a reputation for unsurpassed quality and dependability. The rugged 1/4 h.p. vacuum pump will draw 26 inches of mercury which is ample for holding large work securely. The Gast® Vacuum Pump features oil-less operation for long life, internal muffler for low noise, and rubber feet to eliminate vibration. *1/4 HP *Oil-less operation *Draws 26 inches of mercury *Quiet Operation (less than 70db) *Low vibration *30 lbs. *Wired for 110V

The Vicmarc® VM100 Chuck Faceplate Ring can take the place of traditional faceplates for turning green wood that requires returning later on. *Fits standard jaws supplied on chuck

The Vicmarc® VM120/VM150 Chuck Faceplate Ring can take the place of traditional faceplates for turning green wood that requires returning later on. *Fits standard jaws supplied on chuck *6" Faceplate ring requires 5" Dovetail Jaw Set for use

The Vicmarc® Woodworm Screw is tapered to easily mount into a 3/8" dia. pilot hole while the precision screw bites into the wood for superior holding power. *Mounts directly into chuck *Fits Vicmarc® VM100, VM120, and VM150 Chucks *Tapered to easily mount into a 3/8" dia. pilot hole *Overall length: 2-1/4" *Thread length: 1-3/8"