The armrest is a famous and ancient tool of the professionals, and is most useful for cutting internal threads. Far from being troublesome or awkward, the Robert Sorby® Thread Chasing Armrest is easy to master, giving extra accessibility and freedom of movement, to say nothing of the wonderful tool control and support. "It is very useful to the hardwood turner, as tucked under the left armpit with the crook resting on the tee, it forms an additional tool rest for working at the face without having to adjust the tee (rest)" -Bill Jones *Hooked blade: 8" *Handle length: 15"
Robert Sorby® M2 high-speed steel turning tools have long been a popular line of woodturning tools. Still made in-house in Sheffield, England, their special attention to heat treating, material quality, and overall craftsmanship have made them one of the top choices in woodturning tools.

The armrest is a famous and ancient tool of the professionals, and is most useful for cutting internal threads. Far from being troublesome or awkward, the Henry Taylor® Thread Chasing Armrest is easy to master, giving extra accessibility and freedom of movement, to say nothing of the wonderful tool control and support. "It is very useful to the hardwood turner, as tucked under the left armpit with the crook resting on the tee, it forms an additional tool rest for working at the face without having to adjust the tee (rest)". -Bill Jones. *8" Blade *15" Handle

The Robert Sorby® Relief Cutting Tool is used when hand chasing threads and is designed for making the relief cut at the bottom of an internal thread.

Thread cutting with the Mayes & Warwick® Premium Thread Chaser Set is a fun and rewarding technique that adds a little extra touch to your custom turned boxes. Thread chasing by hand is nearly a lost art, but due to demonstrations and articles by British turners Allan Batty and Bill Jones, it is becoming quite popular among todays turners. Two tools are needed for thread cutting; a notched set of chasers which include an outside and inside chaser. Also, the lathe needs to be capable of low speeds from 100 to 300 RPM.
Includes: *Set of 2 tools *Woodturning Notes by Allan Batty

Robert Sorby® Thread Cutting Tools are designed specifically for cutting wood threads cleanly and consistently with predictable results. *Revolutionary Thread Cutting & Sizing Gauge transfers diameters from one part to another making proper fitting easy *Matched set of tools for cutting exterior and interior threads Includes: Set of 2 tools Sizing gauge "Focus on Cutting Threads" DVD
Robert Sorby® M2 high-speed steel turning tools have long been a popular line of woodturning tools. Still made in-house in Sheffield, England, their special attention to heat treating, material quality, and overall craftsmanship have made them one of the top choices in woodturning tools.

The JET JWL-1640EVS Wood Lathe is loaded with cutting-edge features that distinguish it from others in its class. Included is a sliding headstock that also pivots 360 degrees, electronic infinitely variable speed from 40-3,200 RPM, and a newly designed headstock locking handle.
*Headstock slides and rotates for maximum versatility *Extended spindle nose houses dual headstock spindle bearings *Improved tailstock quill locking mechanism incorporates an anti-rotation key *Tailstock features Acme threads for smooth and durable movement *Banjo uses non-marring, positive locking wedge system to securely hold tool post *Tool post locking mechanism designed for year of consistent strength *Spindle lock latch frees up both hands *Electronic infinitely variable speed from 40-3,200 RPM *36 integrated indexing positions *Newly designed headstock locking handle accessible from front of lathe *Convenient leg-mounted tool holder *Inverter is enclosed for added protection *E Drive Inverter features a built in EMI filter *Conveniently located digital readout *Rubber tool mat on top of headstock Specifications: Swing Over Bed: 16-1/2" Swing Over Tool Rest Base: 12-7/8" Distance Between Centers: 40" Spindle Height: 44-1/2" from floor Headstock Movement: Slide & Rotate Spindle Bore: 5/8" Tailstock Bore: 3/8" Spindle Taper: 2MT Quill Taper: 2MT Quill Travel: 4-1/4" Spindle Thread: 1-1/4" x 8 TPI Spindle Speeds: High range 120-3,200 rpm; Low range 40-1,200 rpm Speed Range: 40-3,200 rpm Number of Indexing Positions: 36 Bed Construction: Cast Iron Motor: 1-1/2 HP Voltage: 115 V Recommended Circuit Size: 20 Amps Net Weight: 375 lbs Shipping Weight: 440 lbs
Standard Accessories: 14" Tool Rest Tool Rest Extension 3" Faceplate Faceplate Wrench 4-Prong Drive Center Live Center Revolving Cone Center Knockout Rod
JET stock number 719500 JET Model JWL-1640EVS

Adapt your 1"-8TPI threaded Easy Wood Tools™ Easy Chuck™ to fit a 1-1/4"-8TPI spindle with this precision machined Easy Wood Tools™ Spindle Adapter. *Precision machined steel *Made in USA *Adapt 1"-8TPI threaded Easy Chuck™ to fit a 1-1/4"-8TPI spindle

The Powermatic PM2020 wood lathe is a full-featured shortbed version of the popular Model 3520B. Designed specifically for woodturners with limited floor space and/or those primarily interested in bowl turning, the Powermatic PM2020 has a 30% smaller footprint than the 3520B yet offers the same great features along with improved accessibility and the added convenience of a short bed.
If you’ve always wanted a 3520B but just haven’t had the space, the Powermatic 2020 might just be the perfect fit for you!
Lathe Features: *20" Dia. capacity *20" Between centers *Electronic variable speed with low and high speed ranges *Digital RPM readout *Solid cast iron construction *Built in spindle indexing on the head stock *Tailstock with internal storage *Spindle lock *Sliding headstock *Chrome plated hand wheels *Self ejecting laser-etched tailstock quill *Sliding hammer knockout rod with brass tip *Attached tool caddy and a metal shelf for tool storage *Accessories fully interchangeable with 3520B Specifications: Swing Over Bed: 20" Swing Over Tool Rest Base: 17" Distance Between Centers: 20" Spindle Height: 44" from floor Sliding Headstock Movement: Full length of bed Spindle Taper: No. 2MT Tailstock Quill Travel: 4-1/2" Headstock Spindle Thread: 1-1/4" x 8TPI Spindle Speeds: High range 125-3,200 rpm; Low range 50-1,200 rpm Number of Indexing Positions: 48 Bed Construction: Cast Iron Motor: 2HP 1 phase Motor Voltage: 220 Motor Current (Amps): 6.2 Recommended Circuit Size (Amps): 20
Standard Accessories: 3" Faceplate Revolving Cone Center 4 Prong Drive Center Faceplate Wrench 14" Tool Rest Sliding Hammer Knockout Rod with Brass Tip
Call for the lowest prices anywhere on the Powermatic® 2020 Lathe and complete lathe packages
Free drop shipping available! Call for details
For additional information or to order please contact: Technical Support 1-800-551-8876

The new JET 1015 Mini Wood Lathe is an excellent choice for anyone looking for an affordable, user-friendly, full featured mini lathe. The Jet 1015 mini lathe has the power, precision and capability necessary for you to turn most any project at a price you can afford. *15-1/2" Between centers *10" Swing capacity *Integrated 24-position indexing *Improved tensioning system *Wider bed ways provide increased rigidity *Added weight for increased stability *Sturdy tool rest base *Roomier access for belt adjustments *No. 2MT
Specifications: Motor: 1/2HP, 115V, 1 PH, 5A Six spindle speeds: 500, 840, 1240, 1800, 2630 and 3975 Swing Over Tool Rest Base (In): 7-5/16 Spindle Thread: 1"/8 TPI Spindle Bore (In): 3/8 Recommended Circuit Size (Amps.): 10 Quill Travel (In): 2

Possibly the finest woodturning lathe on the market today, Robust wood lathes enjoy an unrivaled reputation for craftsmanship, quality and performance with a fit and finish second to none. When you buy a Robust lathe, you’re investing in a lathe that’s built to provide you and future generations with woodturning enjoyment and dependable service.
When you decide to purchase your Robust lathe, we know you want it right away. That’s why we make every effort to keep several lathes "in the works" at Robust so that your wait will most likely be shorter than from other dealers. In addition, when you buy your Robust lathe from Craft Supplies USA, you earn reward cash that never expires.
For complete information on the complete line of Robust lathes and accessories, visit www.turnrobust.com
Features: *Stainless Steel Bed ways that don’t rust *Hardened 1-1/4"-8 TPI 4140 Chrome Moly spindle *Premium variable speed controllers with forward/reverse standard *Convenient magnetic-back control box *Fully adjustable legs for comfortable working height *Headstock spindle drilled and ready for use with vacuum chucks *Heavy duty permanently sealed bearings *Spindle lock with auto disconnect on start up *48 position indexing head *Supplied with commercial duty Leeson/Baldor motor *Available with 2 or 3 HP motor *Full range top quality accessories available *Made in the USA *Backed by 7-Year Warranty Included Standard Accessories: Magnetic backed remote control with variable speed, forward/reverse and stop Machined aluminum hand wheel Spindle Lock with electronic interlock 12" Robust Tool Rest with hardened rod insert Robust Drive Center - cup style with adjustable point and threaded for accessories Robust Live Center - cup style with adjustable point and threaded for accessories 3.5" Aluminum Face Plate Knock-out Rod Operator Manual

The JBOS-5 Benchtop Spindle Sander has a 1/2HP motor, and a large 14-1/2" tilting table. A heavy-duty worm gear system provides one-inch oscillating action, which prolongs sleeve life and helps prevent burnishing of the workpiece. Four inserts are provided, and 5 spindles with sanding sleeves.
*1" oscillating action reduces friction heat to protect wood and prolong sleeve life *Main spindle support runs on precision ball bearings and is oscillated by a heavy-duty worm and gear mechanism for consistent performance *Oscillation gears run in a sealed lubricated box to prolong their life and durability *Table tilts to 45° to accommodate bevel sanding projects *Removable on/off safety switch prevents accidental start-up *Powerful 1/2HP induction motor easily handles the toughest sanding projects *Built-in 2" dust port keeps dust and debris out of the air *Spindles have threaded ends for quick, easy changes *Four table inserts are provided (3/4" and 1" Oblong, 3/4" and 1" Round), to prevent dust and debris from falling into the motor, and help protect operator. *Built-in storage racks keep spindles and table inserts handy *Includes four non-skid rubber feet keep machine stable during use *Includes 1/4", 1/2", 5/8", 1-1/2", 2" spindle assemblies with 100 grit paper Specifications: Style: Benchtop Oscillations Per Minute: 30 Oscillation Stroke: 1" Spindle Speed: 1,725 RPM Table Size: 14-1/2" x 14-1/2" Table Tilt: 0 - 45 Degrees Motor Power: 1/2 HP Motor Voltage: 115 Motor Amps: 3
JET stock number 708404

The JET 1221 Electronic Variable Speed Midi Wood Lathe was designed to provide you with the ultimate control while turning and provides a wide range of features that make your turning experience more enjoyable. The JET 1221 Midi Lathe features cast iron construction, digital RPM readout, forward and reverse operation, patent-pending belt tension system, 24 indexable positions, vibration free operation, optional bed extension and more that make the JET 1221 Variable Speed Midi Lathe a super value. The 1 h.p. electronic variable speed motor operates on 115v power supply and provides you with infinite speed adjustment between 60 and 3,600 RPM, making it ideal for threading, detail work and slow sanding. *12-1/2" Dia. capacity *20-1/2" Between centers *1"-8TPI Spindle *No. 2 Morse Tapers *Variable speed range: 60 to 3600 RPM *Digital RPM readout *Forward and reverse operation *Conveniently located controls *Patent-pending ratchet style belt tensioning system *Easy access to belts *Spindle designed with industrial-style preloaded bearing *24 Integrated indexing positions *Acme thread on tailstock quill *1 Horse power motor *2-1/4" Tailstock quill travel *High quality live center *Optional stand and bed extension available

The new JET 1015 Mini Wood Lathe is an excellent choice for anyone looking for an affordable, user-friendly, full featured mini lathe. The Jet 1015 mini lathe has the power, precision and capability necessary for you to turn most any project at a price you can afford. *15-1/2" Between centers *10" Swing capacity *Integrated 24-position indexing *Improved tensioning system *Wider bed ways provide increased rigidity *Added weight for increased stability *Sturdy tool rest base *Roomier access for belt adjustments *No. 2MT
Specifications: Motor: 1/2HP, 115V, 1 PH, 5A Six spindle speeds: 500, 840, 1240, 1800, 2630 and 3975 Swing Over Tool Rest Base (In): 7-5/16 Spindle Thread: 1"/8 TPI Spindle Bore (In): 3/8 Recommended Circuit Size (Amps.): 10 Quill Travel (In): 2

Possibly the finest woodturning lathe on the market today, Robust wood lathes enjoy an unrivaled reputation for craftsmanship, quality and performance with a fit and finish second to none. When you buy a Robust lathe, you’re investing in a lathe that’s built to provide you and future generations with woodturning enjoyment and dependable service.
When you decide to purchase your Robust lathe, we know you want it right away. That’s why we make every effort to keep several lathes "in the works" at Robust so that your wait will most likely be shorter than from other dealers. In addition, when you buy your Robust lathe from Craft Supplies USA, you earn reward cash that never expires.
For complete information on the complete line of Robust lathes and accessories, visit www.turnrobust.com
Features: *Capacity: 16" with bed in place, 32" with bed way removed *Stainless Steel Bed ways that don’t rust *Removeable bed way section for additional swing *Hardened 1-1/4"-8 TPI 4140 Chrome Moly spindle *Premium variable speed controllers with forward/reverse standard *Convenient magnetic-back control box *Fully adjustable legs for comfortable working height *Headstock spindle drilled and ready for use with vacuum chucks *Heavy duty permanently sealed bearings *Spindle lock with auto disconnect on start up *48 position indexing head *Supplied with commercial duty Leeson/Baldor motor *Available with 2 or 3 HP motor *Full range top quality accessories available *Made in the USA *Backed by 7-Year Warranty Included Standard Accessories: Magnetic backed remote control with variable speed, forward/reverse and stop Machined aluminum hand wheel Spindle Lock with electronic interlock 12" Robust Tool Rest with hardened rod insert Robust Drive Center - cup style with adjustable point and threaded for accessories Robust Live Center - cup style with adjustable point and threaded for accessories 3.5" Aluminum Face Plate Knock-out Rod Operator Manual

The Robust Scout Wood Lathe offers the same quality, workmanship and reliability that Robust is known for in a package costing thousands less than their larger models. With a capacity of 14" over the bed and 26" between centers, the Scout is more than capable of handling most any project large or small. And with a full range of optional accessories including a 16" bed extension, 1.5 h.p. motor upgrade, casters, vacuum adapter and more, you can truly customize your Scout to fit your needs. Designed for mounting directly to a bench top or on the fully adjustable Robust Universal Lathe Stand, the Scout is Robust’s "big-little" lathe that gives you the features and performance you want with a price tag you’ll love. Made in the USA. *Single pulley design for great torque and range *Stainless steel bed ways on rigid pyramid box beam *Easy to read digital RPM readout *Stop bar runs length of bed *20" outboard capacity with optional extension *24-position indexing *1 HP USA made Leeson variable speed motor *USA made inverter for variable speed, forward and reverse *Spindle lock also disconnects controls *Positive spindle lock for one-handed operation *Full range of accessories to choose from *Seven year "head to tail" warranty includes everything, even the spindle bearings Specifications: Swing over bed: 14" Swing with optional outboard bed: 20" Distance between centers: 26" (42" with optional bed extension) Spindle thread: 1-1/4" x 8 TPI Spindle through hole: 3/8" diameter Morse tapers: 2MT Indexing: 24 position Tailstock quill travel: 3" Motor: 1 HP (1.5 HP optional) Voltage: 110v or 220v single phase Net weight: 150 lbs
Includes: Cup style drive center Revolving center 12" tool rest Knock-out rod Operators manual

The new Powermatic 3520C wood lathe builds upon the venerable 3520B with modern styling and exciting new features. The 3520C features a moveable control box, redesigned spindle lock, digital spindle indexing readout, adjustable riser blocks for 6" of height adjustment, and more. Cast iron construction, attention to detail, and user friendly design make Powermatic lathes an excellent value for turners of all skill levels. Backed by Powermatic's 5 year warranty and service centers throughout the USA. New Features *Moveable control box *Redesigned spindle lock *Includes 4" riser blocks for height adjustment *Digital spindle indexing readout *ACME thread tailstock quill *Increased weight for stability Capacities Swing over bed: 20" Swing over tool rest: 15-3/4" Distance between centers: 35-1/2" (working distance with centers installed) Maxium outboard capacity: 38" (with optional bed extension in low position)
Headstock and Tailstock Spindle thread: 1-1/4" x 8 TPI Spindle taper: No. 2MT Spindle through bore diameter: 5/8" Spindle speeds: low range 15-1200 RPM; high range 40-3200 RPM Tailstock quill taper: No. 2MT Tailstock through bore diameter: 3/8" Taisltock quill travel: 4-1/2"
Tool Rest Tool rest width: 14" Tool rest post diameter: 1" Tool rest locking mechanism: Bushing
Motor and Electrics Motor power: 2HP Power requirements: 220V, 1 phase Recommended circuit size: 20 Amps Drive system: Poly V belt, 2-step pulley
Measurements Assembled size (LxWxH): 64" x 24" x 46" (without 4" riser blocks) Bed length: 51" Spindle height from floor: 40-5/8" (without 4" riser blocks) Bed gap: 2-1/2" Net weight: 726 lb. Shipping weight: 770 lb.
Powermatic part # 1353001

The quick-change HTC (Hexagonal Threaded Connector) backing pad is a brilliant accessory that allows you to use many attachments on the Merlin2, including hook and loop discs (interface pad required), bristle discs and aluminum oxide sanding discs. It protrudes beyond the guard allowing you to achieve difficult work angles when needed.

The new and improved Easy Chuck, from Easy Wood Tools, is the most innovative woodturning chuck since the introduction of the 4-jaw scroll chuck. The Easy Chuck features a revolutionary Snap-Lock jaw design that eliminates tedious jaw screws allowing you to change jaws in less than 30 seconds! With jaw changes this fast, you don't need to dedicate a chuck body for each of your most-used jaw setups. Simply insert the included hex wrench into the hole located in the jaw and press to unlock the jaw from the slide. To install, slide the jaw into the slide groove. When you hear the snap, the jaw is locked in place and ready to go!
Another Easy Wood Tools innovation is the Zoom-Ring that allows you to quickly open and close the jaws with your fingertips. Simply rotate the Zoom-Ring on the chuck body to adjust the jaws until they contact the work piece, then apply final tightening pressure with the included chuck key. The new Double-ended Wood Worm Screw provides a 1/2" diameter thread-cutting screw for turning larger blanks and a smaller 3/8" diameter screw for holding smaller blanks.
In the tradition of Easy Wood Tools, the Easy Chuck makes woodturning easier than ever and is built to last a lifetime. *Snap-Lock technology allows you to change jaw sets in less than 30 seconds! *Patent-pending Zoom Ring for rapid jaw adjustment *Precision machined components throughout *2" Dovetail jaws included (2-1/8" max expansion, 1-3/8" min compression) *Jaw corners are rounded for improved safety and coated for corrosion resistance *Accessory jaws available *Craft Supplies USA Exclusive Lifetime Guarantee *Made in the USA Includes: 1-3/8" / 2" Dovetail Jaws Double-ended Woodworm Screw 5/16" T-handle Chuck Key 1/8" Jaw Hex Ball Driver Spindle Washer Spare Jaw Springs Spare Hub Set Screws Owners Manual

This handy Turners Select™ 3/8" Threaded Tap cuts a thread that allows you to easily thread a blank on the mandrel and provides a better bond when gluing the turned blank to bottle stoppers, project handles, and more during assembly. *For use with bottle stoppers and projects that use a 11/32" drill bit *Made of durable high speed steel (HSS) Specifications: Dimensions: 3/8" dia. x 3" overall length 3/8" x 16 TPI H3 thread pitch

Our Artisan Ring Turning Chuck offers accuracy and ease of use when turning Artisan comfort ring cores. Precision machined from solid steel and threaded to fit directly onto your lathe spindle, the single piece design with 60 degree dimple on the end of the shaft for tailstock support guarantees perfect concentricity every time. In addition, long-lasting machined aluminum ring bushings are included in small, medium and large sizes. With the Artisan Ring Turning Chuck, changing bushings and mounting ring cores is as easy as removing the brass tightening nut, swapping out bushings and replacing the nut.
*Designed specifically for turning Comfort Ring Cores *Machined from solid steel, one-piece design *60 degree shaft recess for revolving cone center support *Guarantees accuracy and eliminates vibration *Changing bushings is quick and easy *Can be used for turning bottle stoppers, project handles and more *Replacement aluminum bushings available *Wrench flats for easy removal *3/8"-16 tpi spindle thread *Lifetime Guarantee *Made in USA Includes: Ring chuck body Set of small ring bushings Set of medium ring bushings Set of large ring bushings

Hollow-Pro™ Rocket tools are fast and efficient hollowing tools for making hollow vessels up to about 7" tall and 7" in diameter. Rocket Tools feature a 3/8" diameter, 8" long round shaft to allow hollowing through very small, restricted openings. The round shaft design also allows you to create a super clean shear cut by rotating the tool slightly. Rocket tools use a Hunter #1 size circular carbide cutter and will fit into any large handle with a 3/8" or 1/2" opening. Made in USA
*Straight Hollow-Pro Rocket Tool: Works for most hollow vessel shapes. It also performs very well when turning open bowls, boxes, scoops, etc.
*Bent Hollow-Pro Rocket Tool: Designed for turning hollow vessels that have hard to reach areas, this bent tool can also be used to undercut the shoulder area of larger hollow vessels
*Negative rake cutter angle for controlled cuts *Fast and efficient hollowing up to 7" dia x 7" deep *3/8" shaft allows hollowing through small or restricted openings *Round bar stock allows for shear scraping cuts *Accepts Hunter #1 circular carbide cutters *Overall size- 3/8" diameter x 8" long   *Includes one straight tool, one bent tool, two #1 Hunter Carbide Cutters, and Torx wrench

Designed by Mike Jackofsky, Hollow-Pro™ Hollowing Tools' innovative approach to free-hand hollow turning gives beginner and seasoned woodturners alike the tools they need to be successful. At the heart of the Hollow-Pro™ system is a proprietary internal swivel tip cutter assembly with razor-sharp carbide cutter positioned at a negative angle. This design places the cutter in a trailing position making it less aggressive and easier to control. The swivel tip cutter can be locked in position at any angle you desire and is fully interchangeable between tools. In addition to the carbide cutters, the M4 scraper blade is ideal for making tissue-thin clean up cuts prior to sanding.
The Hollow-Pro™ Bent Shaft Hollowing Tool is designed specifically for use on hollow forms, particularly those with a small opening. The 1/2" Bent Tool is recommended for use on pieces up to 8" dia. and for undercutting the first portion of larger hollow forms. Larger diameter work up to 16" dia. requires the 5/8" Bent Tool. *Hollow-Pro™ tools and swivel tip cutter assemblies are sold separately *1/2" Tool is 10" long *5/8" Tool is 15" long *5/8" Dia. tool shank *Includes allen wrench and 2 tightening screws

Designed by Mike Jackofsky, Hollow-Pro™ Hollowing Tools' innovative approach to free-hand hollow turning gives beginner and seasoned woodturners alike the tools they need to be successful. At the heart of the Hollow-Pro™ system is a proprietary internal swivel tip cutter assembly with razor-sharp carbide cutter positioned at a negative angle. This design places the cutter in a trailing position making it less aggressive and easier to control. The swivel tip cutter can be locked in position at any angle you desire and is fully interchangeable between tools. In addition to the carbide cutters, the M4 scraper blade is ideal for making tissue-thin clean up cuts prior to sanding.
The Hollow-Pro™ Straight Shaft Hollowing Tool is useful not only for hollowing, but it also performs exceptionally well for hogging away wood on open bowls and other forms regardless of grain orientation. *Hollow-Pro™ tools and swivel tip cutter assemblies are sold separately *1/2" Tool is 10" long *5/8" Tool is 15" long *5/8" Dia. tool shank *Includes allen wrench and 2 tightening screws

The Robert Sorby® RS2000 Hollowing System Hooker Tool is specifically designed to provide a safe method of reaching into semi-enclosed forms where straight tools can't reach. Though the Hooker Tool can be used with the Main Handle, we recommend it be used with the Armbrace Handle which gives you better control of the tool. The Hooker Tool will accept both the Swivel Tip Holder with Cutter or the Shear Scraper Blade. *Midi Tear Drop Shear Scraper Blade included

The no-nonsense, quality Kelton™ Slight Bend Hollowing Tool is capable of doing all types of hollowing work. Forged to shape and equipped with a special alloy cutting tip for long life, Kelton Hollowers are equally at home making aggressive hollowing cuts as well as delicate finishing cuts. *Special alloy cutting tip for long life *Sold without a handle Note: Pictured tools are 1/2", the 5/16" tool looks slightly different.

The no-nonsense, quality Kelton™ Heavy Bend Hollowing Tool is capable of doing all types of hollowing work. Forged to shape and equipped with a special alloy cutting tip for long life, Kelton Hollowers are equally at home making aggressive hollowing cuts as well as delicate finishing cuts. *Special alloy cutting tip for long life *Sold without a handle Note: Pictured tools are 1/2", the 5/16" tool looks slightly different.

Replace a lost or damaged screw on your Hollow-Pro™ Hollowing Tool with a Hollow-Pro™ Hollowing Tool Replacement Torx Screw. *Not for cutter

Replace a lost or damaged screw on your Hollow-Pro™ Hollowing Tool Cutter with a Hollow-Pro™ Hollowing Tool Cutter Replacement Torx Screw. *For cutter only

The Robert Sorby® RS2000 Hollowing System Slicer Tool features tungsten carbide tip with hollow ground nose that allows you to make deep plunge cuts, at any angle, to remove cones from bowls or vessels. The Slicer should be mounted in the Armbrace Handle with the Adjustable Side Handle in a convenient position (vertical position recommended), to counteract downward forces created during cutting. To sharpen, we recommend using a "credit card" diamond sharpener.

The Easy Hollower No. 1 is a straight shank tool designed for boring out the bulk of wood from the center of the vessel before undercutting the sides and rim. *For bulk wood removal and boring *Tool measures: 1/2" x 8-1/2" *14" Premium handle *Uses Ci5 carbide cutter Ideal for woodturners of all skill levels, Easy Wood Tools™ Easy Hollowers combine the benefits of the Easy Wood Tools™ razor sharp carbide cutter with a precision milled flat tool shank for stability and strength when turning small hollow forms.

The no-nonsense, quality Kelton™ Medium Bend Hollowing Tool is capable of doing all types of hollowing work. Forged to shape and equipped with a special alloy cutting tip for long life, Kelton Hollowers are equally at home making aggressive hollowing cuts as well as delicate finishing cuts. *Special alloy cutting tip for long life *Sold without a handle

The Robert Sorby® RS2000 Hollowing System Armbrace was designed for comfort control and safety when using Hooker and Slicer tools. The design of the Armbrace makes it possible to reach beyond normal distances over the tool rest while maintaining safety and control. The Robert Sorby® RS2000 Hollowing System Armbrace will accept both RS2000 tools as well as other brands of hollowing tools with a 3/4" diameter shank.

The Easy Hollower No. 2 is specifically designed for clearing out the intermediate area and sides of the vessel prior to undercutting the rim. *For hollowing intermediate area and sides *Tool measures: 3/8" x 7-1/2" *14" Premium handle *Uses Ci5 carbide cutter Ideal for woodturners of all skill levels, Easy Wood Tools™ Easy Hollowers combine the benefits of the Easy Wood Tools™ razor sharp carbide cutter with a precision milled flat tool shank for stability and strength when turning small hollow forms.

Equally at home turning hollow forms or shear scraping, the Robert Sorby® Bent Shank Multi-Tip Hollowing Tool features a flat bottom shaft that increases contact with the tool rest to counteract torque. Change from pivoting hollowing cutter to shear scraper quickly and easily. *3/4" Dia. shank *9-1/2" Long shank *14" Ash handle *23-1/2" Overall length *Round shear scraper blade *3/16" Double-ended hollowing cutter

The Easy Hollower No. 3 is designed for undercutting the sides and rim of the vessel while leaving a smooth finished surface. *For undercutting sides and rim *Full-Size tool measures: 1/2" x 9-1/2" with 16" handle *Mid-Size tool measures: 3/8" x 7-1/2" with 14" handle *Mid-Size tool uses Ci5 carbide cutter *Full-Size tool uses Ci3 carbide cutter Ideal for woodturners of all skill levels, Easy Wood Tools™ Easy Hollowers combine the benefits of the Easy Wood Tools™ razor sharp carbide cutter with a precision milled flat tool shank for stability and strength when turning small hollow forms.

Equally at home turning hollow forms or shear scraping, the Robert Sorby® Straight Shank Multi-Tip Hollowing Tool features a flat bottom shaft that increases contact with the tool rest to counteract torque. Change from pivoting hollowing cutter to shear scraper quickly and easily. *3/4" Dia. shank *6-1/2" Long shank *12" Ash handle *18-1/2" Overall length *Tear drop shear scraper blade *3/16" Round point hollowing cutter *Pointed hollowing tip

The Hollow-Pro™ M4 Scraper Blade fits all Hollow-Pro™ Tools and features a 75 degree grind. *62-64 Rockwell hardness

Equally at home turning hollow forms or shear scraping, the Robert Sorby® Midi Straight Shank Multi-Tip Hollowing Tool features a flat bottom shaft that increases contact with the tool rest to counteract torque. Change from pivoting hollowing cutter to shear scraper quickly and easily.
Includes 3 cutting tips Tear drop shear scraper blade 1/8" Round point hollowing cutter Pointed hollowing tip *1/2" Dia. shank *6" Long shank *10" Ash handle *16" Overall length

Equally at home turning hollow forms or shear scraping, the Robert Sorby® Midi Bent Shank Multi-Tip Hollowing Tool features a flat bottom shaft that increases contact with the tool rest to counteract torque. Change from pivoting hollowing cutter to shear scraper quickly and easily. *1/2" Dia. shank *7" Long shank *12" Ash handle *19" Overall length *Round shear scraper blade *1/8" Double-ended hollowing cutter

Quickly and easily adjust Hollow-Pro™ Hollowing Tools with this high quality T-Handle Torx Wrench. *Large T-handle design, with 4" shaft *Comfortable, rubberized grip * No. 25 Torx Wrench fits Hollow-Pro™ Hollowing Tool screws

The Robert Sorby® RS2000 Hollowing System Adjustable Side Handle is designed to give turners additional support and control of the Hooker and Slicer tools. Simply slide the handle onto the tool shank, adjust to the desired position and you're ready to go.

Henry Taylor® M2 HSS Ray Key Signature Square End Side Scraper: The end/side cutting scraper is used to remove gouge ripples in the bottom of flat bottomed boxes and to true-up side walls. *Durable M2 High-speed steel *Premium white ash handle *6" Blade *3/4" Wide Designed by Ray Key, these M2 HSS Ray Key Signature Tools are the same as those Ray uses to produce his signature boxes, platters and bowls. The unique design of these tools help you speed up the turning process while making it easier at the same time. Each tool is produced to Ray's exact specifications and is supplied with a premium White Ash handle with heavy brass ferrule.

Henry Taylor® M2 HSS Ray Key Signature Spindle Gouge: This modified spindle gouge makes internal hollowing easy due to the short, stubby 60-62 degree angle. When used correctly, the bevel rubs with a slicing action and leaves a very clean cut with no scraping required. *Durable M2 High-speed steel *Premium white ash handle *4" Flute *3/8" Dia. Designed by Ray Key, these M2 HSS Ray Key Signature Tools are the same as those Ray uses to produce his signature boxes, platters and bowls. The unique design of these tools help you speed up the turning process while making it easier at the same time. Each tool is produced to Ray's exact specifications and is supplied with a premium White Ash handle with heavy brass ferrule.

The Hollow-Pro™ Standard Swivel Tip Cutter Assembly is designed for use with Hollow-Pro™ Hollowing Tools and provides agresssive cutting action and rapid stock removal (recommended for intermediate to advanced turners). *No. 1 Cutter: 7/32" dia. for use on hard, dense woods and where limited stock removal is desired *No. 2 Cutter: 5/16" dia. for use on softer materials where rapid stock removal is desired *Includes: swivel tip cutter holder, carbide cutter, and torx wrench

The Easy Wood Tools™ Lexan® Chip Deflector is fully adjustable and is designed to mount directly to the tool shank of Easy Wood Tools™ and deflects wood chips away from you when cutting. *Not a substitute for proper eye protection

The Hollow-Pro™ Negative Swivel Tip Cutter Assembly is designed for use with Hollow-Pro™ Hollowing Tools and is non-agressive, making it ideal for light finishing cuts and general cutting. *No. 2 Cutter: 5/16" dia. for use on softer materials where rapid stock removal is desired *Includes: swivel tip cutter holder, carbide cutter, and torx wrench

The curved cutting edge of the Richard Raffan Skew Chisel allows woodturners to make controlled, low peeling cuts that are impossible with straight-edged skews. *Rectangular section makes peeling cuts for rapid waste removal easy *Radiused blade corners make cutting beads fast *Long bevel sides enable clean, delicate scraping cuts on end-grain shoulders *Durable M2 High Speed Steel *Premium White Ash handle with heavy brass ferrule *1/2" Skew features 12" handle *3/4" and 1" Skews feature 15" handle *6-1/4" Blade Internationally recognized as both a top professional turner and presenter, this line of Henry Taylor® Richard Raffan Signature Tools have enabled Raffan to develop the production speed for which he is famous. Each tool is produced to Richard's exact specifications and is supplied with a premium White Ash handle with heavy brass ferrule.

A welcome addition to the Easy Wood Tools™ line, the Easy Detailer is an ideal beginner tool designed for general shaping, cutting coves, and reaching into tight areas. The razor sharp cutter leaves a super smooth surface on most woods. *For small medium size work *Tool measures: 3/8" x 4" *11-1/2" Premium maple handle *Uses Ci4 cutter *Made in USA

The Easy Parting Tool is the first ever, replaceable carbide insert parting tool for woodturners. EWT’s innovative approach to tool design means the Easy Parting Tool offers many benefits you won’t find in traditional parting tools.
While regular parting tools tend to flex or tip side-to-side, the Easy Parting Tool lets you make parting cuts with confidence and ease thanks to the wide body tool bar design. This unique wide body design offers ample strength and stability at the base of the tool shaft while the narrower cutting section produces just an 1/8" wide cut. And because the carbide cutter cuts cleaner and stays sharp longer than traditional high-speed steel parting tools, you can enjoy a long lasting cutting edge without the need to sharpen. When dull, simply replace the cutter using the Flex Key (included). Instructions included.
FREE EXTRA CUTTER INCLUDED.
Specifications *Handle: Mid-Size 14" Genuine Maple *Tool Bar Length: 6" *Cutting Blade Length: 2-1/2" *Cutting Blade Width: 3/32" *Cut Width: 1/8" *Maximum Part Off Diameter: 4"

These premium quality Torx wrenches are the same as those recommended by Mike Jackofsky for use with his Hollow-Pro Hollowing Tools. The flag style handle makes getting a positive grip easy when changing carbide cutters.
*Flag style handle for positive grip *Molded handle for comfort *Exact fit machined tips *Blades of high performance CRM 72 tool steel *Black oxide finish *Through hardened shank for maximum durability *Made in Germany

The Henry Taylor® M2 HSS Ellsworth Signature Bowl Gouge is one of the most popular woodturning tools in woodturning today. Developed by David throughout his 30 plus year of wodturning, the unique grind found on this gouge is unmatched in its ability to remove large amounts of material fast and effectively while being equially at home making fine finishing cuts. *M2 High speed steel *Premium ash handle *Solid brass ferrule

Designed by Alan Lacer, the Hamlet® M2 HSS Alan Lacer Skew Chisel features a radius cutting edge with a square edge on the long point side of the tool and radius edge on the short side, which makes it easier to roll beads while the square edge on the long point side provides stability when making v-cuts. *M2 High speed steel *16" Premium black-stained ash handle *Solid brass ferrule