The Robert Sorby® RS2000 Hollowing System Slicer Tool features tungsten carbide tip with hollow ground nose that allows you to make deep plunge cuts, at any angle, to remove cones from bowls or vessels. The Slicer should be mounted in the Armbrace Handle with the Adjustable Side Handle in a convenient position (vertical position recommended), to counteract downward forces created during cutting. To sharpen, we recommend using a "credit card" diamond sharpener.

Designed by Mike Jackofsky, Hollow-Pro™ Hollowing Tools' innovative approach to free-hand hollow turning gives beginner and seasoned woodturners alike the tools they need to be successful. At the heart of the Hollow-Pro™ system is a proprietary internal swivel tip cutter assembly with razor-sharp carbide cutter positioned at a negative angle. This design places the cutter in a trailing position making it less aggressive and easier to control. The swivel tip cutter can be locked in position at any angle you desire and is fully interchangeable between tools. In addition to the carbide cutters, the M4 scraper blade is ideal for making tissue-thin clean up cuts prior to sanding.
The Hollow-Pro™ Bent Shaft Hollowing Tool is designed specifically for use on hollow forms, particularly those with a small opening. The 1/2" Bent Tool is recommended for use on pieces up to 8" dia. and for undercutting the first portion of larger hollow forms. Larger diameter work up to 16" dia. requires the 5/8" Bent Tool. *Hollow-Pro™ tools and swivel tip cutter assemblies are sold separately *1/2" Tool is 10" long *5/8" Tool is 15" long *5/8" Dia. tool shank *Includes allen wrench and 2 tightening screws

Designed by Mike Jackofsky, Hollow-Pro™ Hollowing Tools' innovative approach to free-hand hollow turning gives beginner and seasoned woodturners alike the tools they need to be successful. At the heart of the Hollow-Pro™ system is a proprietary internal swivel tip cutter assembly with razor-sharp carbide cutter positioned at a negative angle. This design places the cutter in a trailing position making it less aggressive and easier to control. The swivel tip cutter can be locked in position at any angle you desire and is fully interchangeable between tools. In addition to the carbide cutters, the M4 scraper blade is ideal for making tissue-thin clean up cuts prior to sanding.
The Hollow-Pro™ Straight Shaft Hollowing Tool is useful not only for hollowing, but it also performs exceptionally well for hogging away wood on open bowls and other forms regardless of grain orientation. *Hollow-Pro™ tools and swivel tip cutter assemblies are sold separately *1/2" Tool is 10" long *5/8" Tool is 15" long *5/8" Dia. tool shank *Includes allen wrench and 2 tightening screws

Of all the captive hollow turning systems we’ve used, the Hollow Roller™ is by far the simplest, easiest to use, and most compact system today. Made by Carter Products (the bandsaw guide people), the Hollow Roller™ features a captive bar tool support that eliminates torque allowing you to focus on the fun of turning a hollow form. Unlike other captive hollowing systems, the Hollow Roller™ doesn’t require bulky support frames or tailstock anchoring attachments like other systems.
The Hollow Roller™ is offered unhandled so you can make your own handle or choose from either the short or long Hollow Roller™ Accessory Handle.
*Mounting stud included (choose size to fit your lathe) *Handle not included *Ideal for beginner and experienced turners alike *Simple to set up and easy to use *Compact and fits most lathes including minis *Safer than traditional non-captive hollowing systems *Sealed bearing roller system enables smooth, fluid tool movement *Captive bar system provides ultimate control and torque while turning *Reach up to 12" deep (18" with optional jumbo bar) *Accepts Hunter carbide cutter bits *Modular quick-lock handle fits round shank tools up to 3/4" with accessory collets *Laser guide available for measuring wall thickness *Made in USA Includes: Torque Arrestor Tool Rest Auxiliary Tool Rest Boring Bar Mounting Stud HSS Scraper Bit

Gauge the wall thickness of hollow forms while turning with the Hollow Roller™ System. *Simple, lightweight design *Compact laser light design *High intensity pinpoint red laser *Quick setup and removal *Convenient on/off button near handle *Easy to adjust as needed *Can be used with other hollowing systems or tools with 3/4" dia. round shank. *Uses 2 AAA type batteries (included)

Ideal for turning larger hollow forms and vessels the Hollow Roller™ Jumbo Bar features a robust 1" diameter solid steel bar for added strength and increased reach. *1" Dia. bar for increased strength and stability *Reach up to 18" deep *Fits both Hollow Roller™ Accessory Handles and other 5/8" capacity handles *Accepts Hollow Roller™ HSS Cutter Bit and Hunter™ Carbide Cutter Bit *Made in USA

The Hollow Roller™ 5/8" Hook Bar is designed to provide a safe way of reaching into semi-enclosed forms, particularly those with a small opening.  When used in conjunction with the  Hollow Roller™ Captive Hollowing System, you can work almost anywhere inside a hollow vessel with confidence. *5/8" Dia. bar for increased strength and stability *Access hard-to-reach areas up to 8" deep *Flat Bottom design for stability and control *Fits both Hollow Roller™ Accessory Handles and other 5/8" capacity handles *Accepts Hollow Roller™ 5/8" Hook Bar Replacement Carbide Cutter *Made in USA

The Easy Hollower No. 2 is specifically designed for clearing out the intermediate area and sides of the vessel prior to undercutting the rim. *For hollowing intermediate area and sides *Tool measures: 3/8" x 7-1/2" *14" Premium handle *Uses Ci5 carbide cutter Ideal for woodturners of all skill levels, Easy Wood Tools™ Easy Hollowers combine the benefits of the Easy Wood Tools™ razor sharp carbide cutter with a precision milled flat tool shank for stability and strength when turning small hollow forms.

Pen turning from start to finish is a breeze with the Easy Wood Tools™ Easy Pen Turner. No experience required, the Easy Pen Turner eliminates complicated bevel angles and techniques associated with traditional turning tools. The razor sharp carbide cutter produces a near perfect surface on all types of wood, plastics and antler in only minutes. *Tool measures: 3/8" x 4" *11-1/2" Bubinga handle *Uses Ci2 2" radius cutter *Manufactured exclusively for Craft Supplies USA *Made in USA

Robert Sorby® Thread Cutting Tools are designed specifically for cutting wood threads cleanly and consistently with predictable results. *Revolutionary Thread Cutting & Sizing Gauge transfers diameters from one part to another making proper fitting easy *Matched set of tools for cutting exterior and interior threads Includes: Set of 2 tools Sizing gauge "Focus on Cutting Threads" DVD
Robert Sorby® M2 high-speed steel turning tools have long been a popular line of woodturning tools. Still made in-house in Sheffield, England, their special attention to heat treating, material quality, and overall craftsmanship have made them one of the top choices in woodturning tools.

The Carter Perfect Sphere™ Tool allows you to turn spheres from 1" to 14" diameter depending on your lathe capacity. This system can be used on lathes ranging from 10" to 25" diameter capacity.
The Perfect Sphere™ Tool utilizes a fixed pivot point on which the cutter head pivots side-to-side in an arc motion to cut the sphere to shape. Prior to shaping the sphere using the Perfect Sphere Tool, it’s necessary that the blank be roughed turned between centers to a sphere shape fairly close to the desired final size. For chucking the turned sphere to remove nubs leftover from shaping, we highly recommend the Carter M-Chuck Drive Center system.
The Perfect Sphere Tool system is supplied with an adjustable mounting base designed to fit most lathe beds, a Riser Stud that’s specific to your lathe capacity and a Hunter #4 carbide cutter. If you’re not sure what your lathe capacity is, simply measure from the center of the lathe spindle to the top of the bed ways and multiply the distance by 2.
Example: If the distance from center of spindle to bed way is 8", your lathe capacity is 16". A 16" Riser Stud is the size you need to order. *Turn spheres from 1" to 14" Includes: Adjustable mounting base (fits lathe bed gaps 1" - 4") Perfect sphere tool Hunter #4 carbide cutter Riser stud

Thread cutting with the Mayes & Warwick® Premium Thread Chaser Set is a fun and rewarding technique that adds a little extra touch to your custom turned boxes. Thread chasing by hand is nearly a lost art, but due to demonstrations and articles by British turners Allan Batty and Bill Jones, it is becoming quite popular among todays turners. Two tools are needed for thread cutting; a notched set of chasers which include an outside and inside chaser. Also, the lathe needs to be capable of low speeds from 100 to 300 RPM.
Includes: *Set of 2 tools *Woodturning Notes by Allan Batty

Available exclusively from Craft Supplies USA, the Carter and Son Toolworks Box Scraper features a slightly radiused end and side grind for clearance that allows you to cut a true 90 degree corner in box bottoms and lids. This design not only makes it ideal for turning boxes, it makes it an excellent general purpose scraper too.
The heavy 3/8" thick cross section and 3/4" dia. tang dampens vibration and provides stability while the premium M42 high speed steel provides unparalleled edge holding ability.
*Perfect for cutting corners in boxes/lids *Makes cutting flat surfaces easy *Easy to control when making light cuts *Profile allows you to cut interior square corners *Heavy blade cross section eliminates vibration *Sold Unhandled Specifications: Blade: 6-1/2" x 1" x 3/8" Tang: 3/4" dia. x 2-3/4" long
M42 high speed steel is considered by many top turners to be the "holy grail" of tool steel for woodturning.  Unlike other types of high speed steel that sacrifice extreme edge retention for the ability to be honed to a keen edge, or vice versa, M42 offers both for optimum performance you can count on.
*Extreme edge retention *Sharpens to a very keen edge *Professionally sharpened at Craft Supplies USA *Sharp and ready to use straight from the package *Made in the USA

Henry Taylor® M2 HSS Rex & Kip Signature Pen Tool Set: *M2 High-speed steel *10" Handle *Solid brass ferrule Includes: Deep Fluted Fingernail Gouge Rolled Edge Skew Parting Tool
Henry Taylor® M2 HSS Rex & Kip Signature Tools are featured in the popular book and video, Turning Pens and Pencils by Rex Burningham and Kip Christensen. Perfectly sized for pen turning, these tools feature smaller blades for optimum control and a 10" handle that fits comfortably in the palm of your hand. Made by Henry Taylor Tools®, these M2 high-speed steel tools are custom ground to Rex and Kip's specifications and are guaranteed to help you make the most of your pen turning.

Designed for use with lathes with a swing of 12" or less, the Apprentice™ Center Work Set of tools are made of quality high speed steel and have 3-1/2" blades with 8" ash handles. These are professionally sharpened at Craft Supplies USA and are ready for use straight out of the box. *Made from HSS *Professionally sharpened at Craft Supplies USA Includes: 3/8" Deep Fluted Gouge 3/8" Spindle Gouge 1/2" Oval Skew 1/8" Parting Tool 5/8" Shallow Spindle Gouge 1/2" Round nose Scraper 1/8" Diamond Parting tool 1/2" Square End Scraper

Henry Taylor® M2 HSS Rex & Kip Signature Deep Fluted Fingernail Gouge: *Deep flute provides more cutting surface on the edge than traditional spindle gouges *M2 High-speed steel *3/8" Dia. *10" Handle *Solid brass ferrule Henry Taylor® M2 HSS Rex & Kip Signature Tools are featured in the popular book and video, Turning Pens and Pencils by Rex Burningham and Kip Christensen. Perfectly sized for pen turning, these tools feature smaller blades for optimum control and a 10" handle that fits comfortably in the palm of your hand. Made by Henry Taylor Tools®, these M2 high-speed steel tools are custom ground to Rex and Kip's specifications and are guaranteed to help you make the most of your pen turning.

Deep fluted bowl gouges can be used for shaping bowl profiles but are best reserved for hollowing. The long bevel on the nose makes for an easy entry cut. The tool is then rolled to the steeper right wing bevel to maintain bevel contact into the bottom of a bowl. *Heavy cross section helps dampen vibration while providing stability *Durable M2 High Speed Steel *Premium 17" White Ash handle with heavy brass ferrule *6" Flute length Internationally recognized as both a top professional turner and presenter, this line of Henry Taylor® Richard Raffan Signature Tools have enabled Raffan to develop the production speed for which he is famous. Each tool is produced to Richard's exact specifications and is supplied with a premium White Ash handle with heavy brass ferrule.

The Artisan® Adjustable Pen Mandrel lets you adjust the length of the mandrel to fit any type of project kit. By loosening the locking collar, you can slide the mandrel in or out to fit the blank to be turned. This eliminates the hassle of making "spacers" to adapt shorter barrels to fit a standard pen mandrel. The Adjustable Pen Turning Mandrel allows you to turn 2 pen barrels at a time or a single barrel up to 6" in length. *Quickly adjusts to length of pen tubes *Saves time while turning *7 mm mandrel

The Pen Makers Choice® Closed End Pen Mandrel helps you create extraordinary pens using ordinary pen kits. Available in sizes to fit our most popular pen and project kits, this precision mandrel system eliminates the need to use end caps allowing you to create stunning closed end pens with a clean, custom look and feel you don’t see every day. Made in USA.
*Closed end design adds elegance and value to pens *Precision machined from solid steel *Durable one-piece design *Holds pen and project barrels securely in place *Mount and remount barrels in seconds *Accepts standard mandrel bushings *Mounts in 1/4" collet chuck or standard drill chuck *No tools required *Includes mandrel, 2 locking roll pins (1 spare), and instructions
7mm - Fits Slimline Pens, Stylus, European Pens, Letter Openers, Magnifiers, Bracelet Helper, Key Rings, Mini Key Ring Pen, Light Pulls, Desk Pen, Key Rings and more.

Do you want to be able to drill pen blanks quickly and have the hole consistently on center? If so, the Apprentice™ Pen Drilling Vise will do it! Position the drilling vise on center under the drill bit and clamp the vise soundly to the table. The jaws of the vise ride on 2 rods and are opened or closed by turning a knob. The self-centering jaws will clamp square or round stock up to a 1" square (1 1/4" round). Simply rotate the adjusting knob to open the jaws, insert the pen blank, close the jaws and drill the hole.

Because there isn't a barrel trimmer to fit every pen, there are times when you have to make an adapter so that your trimmer will fit the pen you're making. Mount the Apprentice™ Barrel Trimmer Adapter Blank on your pen mandrel and turn to fit the inside diameter of the barrel you wish to trim. Remove the turned adapter from the pen mandrel and slide it onto the 7mm shaft of your barrel trimmer. You now have a custom fit pilot shaft that allows you to accurately trim your odd sized barrels. *Measures: 3/4" dia. x 2-1/2"

The Robert Sorby® RS2000 Hollowing System Hooker Tool is specifically designed to provide a safe method of reaching into semi-enclosed forms where straight tools can't reach. Though the Hooker Tool can be used with the Main Handle, we recommend it be used with the Armbrace Handle which gives you better control of the tool. The Hooker Tool will accept both the Swivel Tip Holder with Cutter or the Shear Scraper Blade. *Midi Tear Drop Shear Scraper Blade included

The Robert Sorby® RS2000 Hollowing System Armbrace was designed for comfort control and safety when using Hooker and Slicer tools. The design of the Armbrace makes it possible to reach beyond normal distances over the tool rest while maintaining safety and control. The Robert Sorby® RS2000 Hollowing System Armbrace will accept both RS2000 tools as well as other brands of hollowing tools with a 3/4" diameter shank.

Replace a lost or damaged screw on your Hollow-Pro™ Hollowing Tool Cutter with a Hollow-Pro™ Hollowing Tool Cutter Replacement Torx Screw. *For cutter only

The Robert Sorby® RS2000 Hollowing System Adjustable Side Handle is designed to give turners additional support and control of the Hooker and Slicer tools. Simply slide the handle onto the tool shank, adjust to the desired position and you're ready to go.

Replace a worn or damaged cutter on your Robert Sorby® RS2000 Hollowing System Swivel Tip with this 3/16" Replacement Cutter Tip.

Hollow-Pro™ Rocket tools are fast and efficient hollowing tools for making hollow vessels up to about 7" tall and 7" in diameter. Rocket Tools feature a 3/8" diameter, 8" long round shaft to allow hollowing through very small, restricted openings. The round shaft design also allows you to create a super clean shear cut by rotating the tool slightly. Rocket tools use a Hunter #1 size circular carbide cutter and will fit into any large handle with a 3/8" or 1/2" opening. Made in USA
*Straight Hollow-Pro Rocket Tool: Works for most hollow vessel shapes. It also performs very well when turning open bowls, boxes, scoops, etc.
*Bent Hollow-Pro Rocket Tool: Designed for turning hollow vessels that have hard to reach areas, this bent tool can also be used to undercut the shoulder area of larger hollow vessels
*Negative rake cutter angle for controlled cuts *Fast and efficient hollowing up to 7" dia x 7" deep *3/8" shaft allows hollowing through small or restricted openings *Round bar stock allows for shear scraping cuts *Accepts Hunter #1 circular carbide cutters *Overall size- 3/8" diameter x 8" long   *Includes one straight tool, one bent tool, two #1 Hunter Carbide Cutters, and Torx wrench

The Robert Sorby® RS2000 Hollowing System Swivel Tip with Cutter is used for most of the hollow turning process and consists of a cutter that rests in a swivel holder which allows you to rotate and adjust the position of the cutter depending on your needs.

The Hollow-Pro™ Standard Swivel Tip Cutter Assembly is designed for use with Hollow-Pro™ Hollowing Tools and provides agresssive cutting action and rapid stock removal (recommended for intermediate to advanced turners). *No. 1 Cutter: 7/32" dia. for use on hard, dense woods and where limited stock removal is desired *No. 2 Cutter: 5/16" dia. for use on softer materials where rapid stock removal is desired *Includes: swivel tip cutter holder, carbide cutter, and torx wrench

The Hollow-Pro™ Negative Swivel Tip Cutter Assembly is designed for use with Hollow-Pro™ Hollowing Tools and is non-agressive, making it ideal for light finishing cuts and general cutting. *No. 2 Cutter: 5/16" dia. for use on softer materials where rapid stock removal is desired *Includes: swivel tip cutter holder, carbide cutter, and torx wrench

Replace a worn or damaged cutter on your Hollow-Pro™ Swivel Tip Cutter Assembly with a Hollow-Pro™ Replacement Carbide Cutter. *No. 1 is for use on hard, dense wood and when limited stock is available *No. 2 is for use on softer materials where rapid stock removal is desired Specifications: Dimensions (No. 1): 7/32" dia. Dimensions (No. 2): 5/16" dia.

Designed for use with the Hollow Roller™ Captive Hollowing System, this HSS Round Cutter produces clean scraping cuts, ideal for hollowing.

Enjoy making effortless, super smooth cuts with a razor-sharp Hunter™ Carbide cutter on your Hollow Roller™ System. *Carbide cutter lasts 20-30 times longer than HSS *Never needs sharpening, simply rotate the cutter to expose a fresh edge *Includes: Mounting shank, Hunter Hollow Roller carbide bit, Torx screw, and wrench

Required for mounting the Hollow Roller™ Captive Bar assembly in your tool rest support. Select the appropriate Adapter Stud to fit your lathe’s tool rest support.

Designed for use with the Hollow Roller™ boring bar and other 5/8" diameter shank tools, these accessory handles provide the flexibility you need to suit the work at hand. A Craft Supplies USA favorite, the Hollow Roller™ Short handle is only 5-3/4" long to provide superior control and feel while eliminating the unnecessary weight of the longer standard handle. *Machined from vibration-dampening aluminum *5-3/4" Short Handle features rubberized ergonomic grip and set screw *17" Long Handle features texturized aluminum grip and collet set up *Made in USA

Designed for use with the Hollow Roller™ this HSS Cutter Bit produces clean scraping cuts, ideal for hollowing.

Designed for use with the Hollow Roller™ 5/8" Hook Bar, this Replacement Carbide Cutter produces clean scraping cuts, ideal for hollowing.

Designed for use with the Hollow Roller™ Jumbo Bar and Laser Guide, the Hollow Roller™ Jumbo Bar Laser Adapter extends the reach of the laser housing to provide an accurate indication of the cutter presentation when hollow turning with the Jumbo Bar. *Extends reach of laser to accommodate Jumbo Bar length *Requires Hollow Roller™ Laser Guide for use *Made in USA

Replace a worn or damaged cutter with this No.1 Replacement Cutter.

Designed by Mike Jackofsky, the precision made Hollow-Pro Caliper combines steel and aluminum for maximum strength while maintaining a comfortable light working weight and is designed to indicate the wall thickness of hollow forms, vessels, bowls and platters by transferring the measurement from one end of the caliper to the other.  The extended reach design and easy to see indicator makes it extremely versatile and accurate helping you achieve a perfect uniform thickness.  *Steel and aluminum construction for maximum strength and durability *Measure hollow forms, vessels, bowls and more *Large caliper measures hollow forms up to 18" in dia. and 11-3/4" deep *Small caliper measures measures hollow forms up to 8" in diameter and 6-1/4" deep *Made in USA

Hunter™ Carbide Hollowing Tools are the choice of turners everywhere for turning hollow forms and end-grain work such as boxes, goblets, etc.
At the heart of the system is a circular structured carbide cutter that lasts up to 100 times longer than similar HSS cutters and does not require sharpening. When the cutting edge is dull, simply rotate the cutter to position a fresh cutting edge and youíre ready to go. When worn out, throw the old cutter away and install a new one. *3/8" x 4-3/4" Shaft *12" Ash handle *Includes 3/8" round carbide cutter and No. 3 Torx wrench

The Easy Hollower No. 1 is a straight shank tool designed for boring out the bulk of wood from the center of the vessel before undercutting the sides and rim. *For bulk wood removal and boring *Tool measures: 1/2" x 8-1/2" *14" Premium handle *Uses Ci5 carbide cutter Ideal for woodturners of all skill levels, Easy Wood Tools™ Easy Hollowers combine the benefits of the Easy Wood Tools™ razor sharp carbide cutter with a precision milled flat tool shank for stability and strength when turning small hollow forms.

The Easy Hollower No. 3 is designed for undercutting the sides and rim of the vessel while leaving a smooth finished surface. *For undercutting sides and rim *Full-Size tool measures: 1/2" x 9-1/2" with 16" handle *Mid-Size tool measures: 3/8" x 7-1/2" with 14" handle *Mid-Size tool uses Ci5 carbide cutter *Full-Size tool uses Ci3 carbide cutter Ideal for woodturners of all skill levels, Easy Wood Tools™ Easy Hollowers combine the benefits of the Easy Wood Tools™ razor sharp carbide cutter with a precision milled flat tool shank for stability and strength when turning small hollow forms.

Hunter™ Carbide Hollowing Tools are the choice of turners everywhere for turning hollow forms and end-grain work such as boxes, goblets, etc.
At the heart of the system is a circular structured carbide cutter that lasts up to 100 times longer than similar HSS cutters and does not require sharpening. When the cutting edge is dull, simply rotate the cutter to position a fresh cutting edge and youíre ready to go. When worn out, throw the old cutter away and install a new one. *3/8" x 4-3/4" Shaft *12" Ash handle *Includes 3/8" round carbide cutter and No. 3 Torx wrench

Replace a worn or damaged cutter on your Hunter™ Carbide Hollowing Tools with a genuine Hunter™ Replacement Carbide Cutter. This cutter is also a direct replacement for the Eliminator Standard Hollowing tool. *No. 3/No. 5 cutter is 3/8" dia.

Use the Robert Sorby® Mini Hollowing Tool Wall Thickness Gauge in conjunction with Robert Sorby® Mini Hollowing Tools to achieve consistent results every time.

The Robert Sorby® Mini Swivel Tip Hollowing Tool is designed primarily for hollow forms, vases and other hard-to-reach places. Use in conjunction with the Robert Sorby® Mini Hollowing Tool Wall Thickness Gauge to achieve consistent results everytime. *5-1/2" Blade *14" Overall length *Premium ash handle

Robert Sorby® Universal Micro Swan Neck Hollowing Tool: *Ideal for hollowing ornaments, lidded boxes and small, enclosed vessels *M2 High-speed steel *5/16" Shaft *Robert Sorby® Universal Micro Tool Handle required for use Robert Sorby® Universal Micro Tool Blades are specifically designed to help woodturners meet the challenges of turning small projects where traditional tools won’t do.
Engineered from durable high-speed steel, Robert Sorby® Micro Turning Tools are ideal for pen turning, small spindle work and other delicate projects.  Simply choose the blades you need, add the interchangeable aluminum handle and you have a customized, micro turning tool set.  All blades have a 5/16" shaft.

Designed for use with the Robert Sorby® Mini Swivel Tip Hollowing Tool this Replacement Scraper Cutter makes it easy to peel away wood in hard-to-reach areas.

The Henry Taylor® M2 HSS Mini Tool Set is well made and the same quality as other Henry Taylor Tools. These mini tools are ideal for small detailed work as they enable close control for precision woodturning. All tools are handled and are supplied in a plastic wallet. Blade length: average 3-3/4" long. Handle length: 7" long.
Includes: *1/4" General Gouge *3/16" Spindle Gouge *1/4" Round Nose Scraper *1/4" Skew Chisel *5/32" Parting tool

Robert Sorby® Universal Micro Beading/Parting Tool: *Ideal for making narro parts and shaping small beads *M2 High-speed steel *5/16" Shaft *Robert Sorby® Universal Micro Tool Handle required for use Robert Sorby® Universal Micro Tool Blades are specifically designed to help woodturners meet the challenges of turning small projects where traditional tools won’t do.
Engineered from durable high-speed steel, Robert Sorby® Micro Turning Tools are ideal for pen turning, small spindle work and other delicate projects.  Simply choose the blades you need, add the interchangeable aluminum handle and you have a customized, micro turning tool set.  All blades have a 5/16" shaft.

The Robert Sorby® Universal Micro Tool Handle is specifically designed to help woodturners meet the challenges of turning small projects where traditional tools won't do. *7-3/4" long *Strong and durable aluminum construction *Easy-to-grip, textured handle design *5/16" Dia. hole *Accepts all Robert Sorby® Universal Micro Tools