H1 Heading Not Displayed

Replace a lost or damaged center screw on your Precision Machine™ Screw Center Chuck with this genuine Precision Machine™ Screw Center Chuck Replacement Screw. *3/8" dia.

8 Jaw screws for Vicmarc VM100 Chuck

The Oneway® Woodworm Screw is tapered to easily mount into a 3/8" diameter pilot hole, and the precision screw bites into the wood for superior holding power. Designed for Oneway® Chucks, the Woodworm Screw features a front slot and four grooves so the jaws lock it firmly into place and prevent spinning. Use the large 2" screw for rough turning large bowls. Also available as a left hand screw for use on the outboard side of the lathe.

The Vicmarc® Woodworm Screw is tapered to easily mount into a 3/8" dia. pilot hole while the precision screw bites into the wood for superior holding power. *Mounts directly into chuck *Fits Vicmarc® VM100, VM120, and VM150 Chucks *Tapered to easily mount into a 3/8" dia. pilot hole *Overall length: 2-1/4" *Thread length: 1-3/8"

The SC3 and SC4 are supplied with the indispensable Record Power woodworm screw. Ideal for mounting bowl blanks, this screw is held in the jaws of the chuck, giving exceptional holding power. This means a separate wood screw chuck need not be used and the chuck can stay on the lathe, saving time and effort. *Tapered to easily mount into a 3/8" dia. pilot hole *Overall length: 1-15/16" *Thread length: 7/8" *Right hand thread

8 Jaw screws for the Oneway Talon and Stronghold Chucks.

The Precision Machine™ Arbor Screw Chuck features a precision ground and hardened screw that provides maximum holding power. It is ideal for small boxes, goblets, bowls, scoops, or other miniatures. Workpiece requires a 3/16" pre-drilled hold. *No. 2 MT Specifications: Face diameter: 1-1/4" Screw length: 9/16"

Replace worn or damaged grippers on your Oneway® Mega Jumbo, Jumbo Jaw or Mini Jumbo Jaw Set with the Oneway® Jumbo Jaw Replacement Gripper Set. *Includes 8 replacement grippers *Choose either standard screw length or long screw length for stacking grippers

This fastening kit is designed to fit both the SC3 and SC4 chucks. *Fits both SC3 & SC4 Includes: 8 hex jaw screws 3 and 4 mm hex wrenches Blind set screw with fiber washer

The 4" SC4 is built to meet the needs of professional woodturners, being capable of holding large work pieces while possessing the precision and compactness to handle more delicate work. A heavy duty chuck, the SC4 features an overall robust design with enclosed back, full indexing plate, and pinions driven by a long ball-ended hex key to make access easy even when large work pieces are mounted. The threaded insert design allows you to use your chuck on multiple lathes by changing inserts. *Exceptional value *Superb fit and finish *Sealed backing plate w/ full indexing *Made of 1045 high tensile steel for superior strength and performance *True-Lock™ precision engineered gears for accuracy and smooth operation *Oversize jaw slides for superior load bearing capability *Full range of premium jaws and accessories *Jaws are fully interchangeable between SC3 and SC4 chucks *Threaded insert design allows you to use the chuck on various lathes *Intuitive operation: right to tighten, left to loosen *Fully compatible with Nova and Sorby Patriot chuck jaws *Long handled tightening key for one hand operation *Supplied in handy storage case *5 year guarantee Specifications: Chuck size: 4" Expansion range: 2" – 2-3/4" Compression range: 1-5/16" – 2-3/4"
Includes: Chuck body Threaded insert 2" (50mm) dovetail jaw set Woodworm screw Jaw screws (8) 3mm and 4mm Hex wrenches SC4 Chuck hex key Insert spanner wrench Storage case
For over 100 years, Record Power has been known for quality and value in woodworking tools and equipment. Their new generation of SC Series chucks were developed based on extensive experience and input from professionals. The result is a range of chucks and accessories that offer unrivaled performance, unmatched quality, and unbeatable value for your money.

Our experience has shown that most screw chucks are only used for a single purpose, and once set up are seldom changed. We decided to provide a single purpose screw chuck, rugged in construction and at an economical price. The Precision Machine™ Screw Center Chuck features a 3/8" x 1" stainless steel heat treated screw, which is fitted and pressed into the flange, straight and true, providing about 3/4" of useful holding power. The sharp threads cut into a 1/4" hole drilled into the wood, and hold the work securely. *Includes lever bar

Many woodturners use a dedicated chuck for mounting their most often used jaws to save time and effort when turning. Requires jaws for use. *Exceptional value *Superb fit and finish *Sealed backing plate w/ full indexing *Made of 1045 high tensile steel for superior strength and performance *True-Lock™ precision engineered gears for accuracy and smooth operation *Oversize jaw slides for superior load bearing capability *Full range of premium jaws and accessories *Jaws are fully interchangeable between SC3 and SC4 chucks *Threaded insert design allows you to use the chuck on various lathes *Intuitive operation: right to tighten, left to loosen *Fully compatible with Nova and Sorby Patriot chuck jaws *5 year guarantee Includes: Chuck body Threaded insert 8 jaw screws
For over 100 years, Record Power has been known for quality and value in woodworking tools and equipment. Their new generation of SC Series chucks were developed based on extensive experience and input from professionals. The result is a range of chucks and accessories that offer unrivaled performance, unmatched quality, and unbeatable value for your money. 5 Year Guarantee.

The 3-1/2" Vicmarc VM100 Chuck is recommended for use on 8-12" capacity lathes. With appropriate accessory jaws this chuck is suitable for use on 16" capacity lathes.
*Precision machined *One-hand tightening *Key operated Specifications: Chuck size: 3-1/2"
Includes: Jaw Screws (8) 3mm and 8mm T-handle Tightening Keys Threaded Insert Insert Lever
Considered by many to be the finest woodturning chucks on the market, Vicmarc chucks have long enjoyed a reputation for quality and dependability.
Precision machined Vicmarc chucks provide smooth operation, superb accuracy, and overall quality unsurpassed by any other brand of chuck. Key operated Vicmarc chucks offer one-hand tightening for convenience while providing mazimum holding power with minimal effort. With a wide range of jaws and accessories to choose from, you can build a superior chucking system to suit your needs.

Considered by many to be the finest woodturning chucks on the market, Vicmarc chucks have long enjoyed a reputation for quality and dependability. This 5" VM120 Chuck is recommended for use on 16-24" capacity lathes. With appropriate accessory jaws this chuck is suitable for use on larger lathes.
*Includes: 2-1/2" dovetail jaw set, woodworm screw, 4 mm & 10 mm t-handle tightening keys, insert lever and threaded insert

The 3-1/2" Vicmarc VM100 Chuck is recommended for use on 8-12" capacity lathes. With appropriate accessory jaws this chuck is suitable for use on 16" capacity lathes.
*Precision machined *One-hand tightening *Key operated *Quality Vicmarc 2" Dovetail Jaw Set Specifications: Chuck size: 3-1/2" Jaw Compression Range: 1-1/4"- 2-3/4" Jaw Expansion Range: 1-3/4" - 3-1/4"
Includes: 2" (50mm) Dovetail Jaw Set Woodworm Screw Jaw Screws (8) 3mm and 8mm T-handle Tightening Keys Threaded Insert Insert Lever
Considered by many to be the finest woodturning chucks on the market, Vicmarc chucks have long enjoyed a reputation for quality and dependability.
Precision machined Vicmarc chucks provide smooth operation, superb accuracy, and overall quality unsurpassed by any other brand of chuck. Key operated Vicmarc chucks offer one-hand tightening for convenience while providing mazimum holding power with minimal effort. With a wide range of jaws and accessories to choose from, you can build a superior chucking system to suit your needs.

The 4-1/2", Oneway® Stronghold Chuck is an excellent choice for woodturners who need a heavy duty chuck that is capable of holding large diameter work. With No. 2 jaws, this chuck will comfortably handle work up to 14" in diameter. Larger work is easily turned using larger jaws.
Includes: No. 2 profiled jaw set, threaded insert, woodworm screw, t-handle tightening key, 4 mm hex wrench, and owner's manual

The new and improved Easy Chuck, from Easy Wood Tools, is the most innovative woodturning chuck since the introduction of the 4-jaw scroll chuck. The Easy Chuck features a revolutionary Snap-Lock jaw design that eliminates tedious jaw screws allowing you to change jaws in less than 30 seconds! With jaw changes this fast, you don't need to dedicate a chuck body for each of your most-used jaw setups. Simply insert the included hex wrench into the hole located in the jaw and press to unlock the jaw from the slide. To install, slide the jaw into the slide groove. When you hear the snap, the jaw is locked in place and ready to go!
Another Easy Wood Tools innovation is the Zoom-Ring that allows you to quickly open and close the jaws with your fingertips. Simply rotate the Zoom-Ring on the chuck body to adjust the jaws until they contact the work piece, then apply final tightening pressure with the included chuck key. The new Double-ended Wood Worm Screw provides a 1/2" diameter thread-cutting screw for turning larger blanks and a smaller 3/8" diameter screw for holding smaller blanks.
In the tradition of Easy Wood Tools, the Easy Chuck makes woodturning easier than ever and is built to last a lifetime. *Snap-Lock technology allows you to change jaw sets in less than 30 seconds! *Patent-pending Zoom Ring for rapid jaw adjustment *Precision machined components throughout *2" Dovetail jaws included (2-1/8" max expansion, 1-3/8" min compression) *Jaw corners are rounded for improved safety and coated for corrosion resistance *Accessory jaws available *Craft Supplies USA Exclusive Lifetime Guarantee *Made in the USA Includes: 1-3/8" / 2" Dovetail Jaws Double-ended Woodworm Screw 5/16" T-handle Chuck Key 1/8" Jaw Hex Ball Driver Spindle Washer Spare Jaw Springs Spare Hub Set Screws Owners Manual

Precision Machine screw chucks have long been a staple item in our woodturning workshop because of their versatility and ease of operation.
Whether you're roughing bowls, turning boxes or making wooden jigs and jam chucks, the Precision Machine 3-in-1 is perfectly suited for the task. To use, simply drill a hole in the blank to be mounted, thread the blank onto the screw until it rests against the face of the chuck and you’re off and running. When needed, you can remove or remount blanks and the work will re-center again. And with two different sizes of woodworm screws (1/4" and 3/8" dia. included) and reversible tapered collar, you have what you need for most types of work.
The Precision Machine 3-in-1 Screw Chuck includes: a machined steel chuck body with 1-1/2" diameter face, 1/4" and 3/8" diameter interchangeable hardened stainless steel woodworm screws, a 1"-8 TPI spindle adapter, and an aluminum reversible collar that gives you a 2-1/2" and 3-1/2" face for holding larger work.
The optional Jumbo Reversible Collar provides a 4-1/2" and 6-1/2" face that's ideal when chucking large bowls and platters.
*Spindle size: 1-1/4"-8 TPI direct thread with a 1"-8 TPI adapter (included) *Superior performance and unrivalled value *Versatile and easy to use *Quickly mount projects *Re-centers jigs and fixtures exceptionally well *Ground and hardened stainless steel screws made in USA *Includes 1/4" and 3/8" interchangeable screws *Recessed face with perimeter shoulder accommodates uneven blanks *Available exclusively from Craft Supplies USA *Backed by our 100% satisfaction guarantee In the box: Screw chuck body 1/4" woodworm screw 3/8" woodworm screw Double-sided aluminum collar: 1-1/2" & 2-1/2" dia. faces Lever bar 1"-8 TPI spindle adapter

The Oneway® Talon Chuck offers many of same the features found on the Stronghold Chuck but in a compact, 3-1/2" diameter size and weighing only 3.4 pounds. One-hand key operation, and serrations on the dovetail jaws, make it easy to get a tenacious grip on the work piece with little effort. The unique serrated jaw slides provide smoother operation on longer life. The jaw slides and scroll are hardened to provide years of dependable, accurate service.
Includes: No. 2 profiled jaws set, woodworm screw, threaded insert, t-handle tightening key, 4 mm hex wrench, and owner's manual

The 3.5" SC3 chuck is lighter and more compact than the SC4, making it ideal for use on any lathe, particularly small to medium sized machines where minimal overhang is desired. The compact design reduces load on the lathe spindles and bearings and gives good access to smaller work pieces. Oversize jaw slides offer unrivaled strength and holding power that cannot be found in other chucks of this size. The threaded insert design allows you to use your chuck on multiple lathes by changing inserts.
*Made of 1045 high tensile steel for superior strength and performance *True-Lock™ precision engineered gears for accuracy and smooth operation *Oversize jaw slides for superior load bearing capability *Jaws are fully interchangeable between SC3 and SC4 chucks *Intuitive operation: right to tighten, left to loosen *Fully compatible with Nova and Sorby Patriot chuck jaws *Long handled tightening key for one hand operation *Supplied in handy storage case *5 year guarantee Includes: Chuck 2" (50mm) dovetail jaw set Woodworm screw Jaw screws (8) 3mm and 4mm Hex wrenches SC3 Chuck hex key No-Lock spindle washer Storage case
Specifications: Chuck size: 3-1/2" Expansion range: 2" – 2-3/4" Compression range: 1-5/16" – 2-3/4"
For over 100 years, Record Power has been known for quality and value in woodworking tools and equipment. Their new generation of SC Series chucks were developed based on extensive experience and input from professionals. The result is a range of chucks and accessories that offer unrivaled performance, unmatched quality, and unbeatable value for your money.

Our experience has shown that most screw chucks are only used for a single purpose, and once set up are seldom changed. We decided to provide a single purpose screw chuck, rugged in construction and at an economical price. The Precision Machine™ Screw Center Chuck features a 3/8" x 1" stainless steel heat treated screw, which is fitted and pressed into the flange, straight and true, providing about 3/4" of useful holding power. The sharp threads cut into a 1/4" hole drilled into the wood, and hold the work securely. *Includes lever bar

For bowls and platters up to 20" diameter. With the Easy Wood Tools™ Easy Chuck™ changing an entire set of jaws takes about 30 seconds.  Easy Wood Tools™ patent-pending Snap-Lock Technology eliminates the need to remove jaw slides and jaw screws saving you time and money.  Simply insert the small t-handle wrench into the small hole located in the jaw and press to unlock the jaw from the jaw slide.  To install, simply slide the jaw into the chuck.  When you hear the snap, the jaw is locked in place and ready to go! *Compression range: 2-1/2" - 4-1/2" *Expansion range: 4" - 5-1/4" *Quick and Easy:  No changing screws or removing jaw slides *Safety Corners: Rounded corners of the top jaws reduce chance of injury to knuckles *Durable Components: Easy Jaw components are hardened and corrosion resistant for extreme durability.

For small projects up to 5" diameter With the Easy Wood Tools™ Easy Chuck™ changing an entire set of jaws takes about 30 seconds.  Easy Wood Tools™ patent-pending Snap-Lock Technology eliminates the need to remove jaw slides and jaw screws saving you time and money.  Simply insert the small t-handle wrench into the small hole located in the jaw and press to unlock the jaw from the jaw slide.  To install, simply slide the jaw into the chuck.  When you hear the snap, the jaw is locked in place and ready to go! *Compression range: 1/2" - 1-11/16" *Expansion range: 1-1/4" - 2-7/16" *Quick and Easy:  No changing screws or removing jaw slides *Safety Corners: Rounded corners of the top jaws reduce chance of injury to knuckles *Durable Components: Easy Jaw components are hardened and corrosion resistant for extreme durability.

For bowls and platters up to 6" diameter. With the Easy Wood Tools™ Easy Chuck™ changing an entire set of jaws takes about 30 seconds.  Easy Wood Tools™ patent-pending Snap-Lock Technology eliminates the need to remove jaw slides and jaw screws saving you time and money.  Simply insert the small t-handle wrench into the small hole located in the jaw and press to unlock the jaw from the jaw slide.  To install, simply slide the jaw into the chuck.  When you hear the snap, the jaw is locked in place and ready to go! *Compression range: 1-3/8" - 2-7/16" *Expansion range: 2" - 3-3/16" *Quick and Easy:  No changing screws or removing jaw slides *Safety Corners: Rounded corners of the top jaws reduce chance of injury to knuckles *Durable Components: Easy Jaw components are hardened and corrosion resistant for extreme durability.

At nearly half the price of comparably equipped chucks, the Apprentice™ 4-Jaw Chuck offers budget-minded woodturners an economical way of exploring the many advantages of using chucks when turning. Equipped with 4 different sets of serrated jaws, woodworm screw, threaded adapter and T-handle, the Apprentice™ 4-Jaw Chuck is capable of performing most frequently used chucking operations like turning bowls, boxes, vases, and hollow forms on lathes up to 12" capacity. Jaws are not interchangeable with other chucks. *Chuck body measures 3-3/4" Includes: No. 1 Jaws (Compression: 3/8" - 1-3/4", Expansion: 7/8" - 2-3/8") No. 2 Jaws (Compression: 1-3/4" - 3", Expansion: 2" - 3-3/8") No. 3 Jaws (Compression: 2-7/8" - 4-5/8", Expansion: 3-3/8" - 5-1/8") Pin Jaws (Compression: N/A, Expansion: 1" - 2-3/8") 1" x 8TPI Threaded insert 3/4" x 16TPI Threaded insert Woodworm screw T-handle chuck key T-handle Allen Wrenches Wood Storage Box

EWT’s Big Easy Jaws are just the ticket for re-chucking bowls for final shaping and finishing. Some of the advantages of being able to re-chuck a bowl include: light turning for shaping, removing damaged wood left by the chuck and customizing the base for just the right look.
Big Easy Jaws are supplied with tapered non-marking urethane grippers that hold the work securely in place. Not only are these jaws capable of gripping the interior of reverse curve bowls as well as the exterior of open form bowls, the full range of gripper mounting holes let you position them as needed to fit almost any size bowl.
As with all Easy Chuck accessories, Big Easy Jaws utilize Snap-Lock technology for fast jaw changing. Choose from a 12" model for smaller lathes or 16" model for larger lathes. With the optional 20" Big Easy Extensions, you can grip bowls up to 20" in diameter. And, if you’re in need of additional gripping surface or longer reach, the optional 2" Easy Reach Grippers will help you get the job done.
12" Jaw Specifications Compression: 3" - 10" Expansion: 5" - 12"
16" Jaw Specifications Compression: 3" - 14" Expansion: 5" - 16"
Includes: *Jaw plates *8 grippers *Mounting screws

This rubber gripper set fits both the Mega and Mini Remounting Jaws. *Fits both the Mega and Mini Remounting Jaws Includes: 8 round rubber grippers 8 screws

With the Easy Wood Tools™ Easy Chuck™ changing an entire set of jaws takes about 30 seconds.  Easy Wood Tools™ patent-pending Snap-Lock Technology eliminates the need to remove jaw slides and jaw screws saving you time and money.  Simply insert the small t-handle wrench into the small hole located in the jaw and press to unlock the jaw from the jaw slide.  To install, simply slide the jaw into the chuck.  When you hear the snap, the jaw is locked in place and ready to go! *Quick and Easy:  No changing screws or removing jaw slides *Safety Corners: Rounded corners of the top jaws reduce chance of injury to knuckles *Durable Components: Easy Jaw components are hardened and corrosion resistant for extreme durability. 2-3/8" Jaws Specifications: For bowls and platters up to 12" diameter. Compression range: 2-3/8" - 3-3/8" Expansion range: 3" - 4-3/16"
3-1/2" Jaws Specifications: For bowls and platters up to 24" diameter. Compression range: 3-1/2" - 4-7/16" Expansion range: 4-3/16" - 5-3/8"

Remounting jaws are very popular as they allow you to re-chuck bowls and projects for light reshaping, removing tooling marks as well as creating decorative elements on the foot of the bowl. Soft rubber grippers hold the work comfortably in place without marring. Cast aluminum construction with 8 rubber grippers and 8 standard screws.
*Cast aluminum construction *Can be used for expansion and compression *Non-marking soft rubber stoppers Mega Jaws Specifications Compression range: 2-1/8" – 10-7/8" Expansion range: 3-1/2" – 12-3/8" Can be used on a 14" capacity lathe or larger Can be used on a 12" capacity lathe (compression only)
Mini Jaws Specifications Compression range: 2-1/4" – 6-3/4" Expansion range: 3-3/4" – 8-1/4" Can be used on a 10" capacity lathe or larger
Includes: 4 piece jaw set 8 round rubber grippers 8 square rubber grippers (Mega Jaws only) 8 screws

The Vicmarc® VM150 Dual-Action Mega Chuck was designed from the ground up to be the strongest, most secure chucking system in the world for large capacity lathes. The VM150 Dual-Action Mega Chuck allows you to operate the chuck in two different modes via the selector lever on the backside of the chuck. In lever operation mode, the chuck rapidly opens, closes and tightens using levers. In key operation mode, opening, closing and tightening is done using the T-Handle. This allows for one hand operation and provides maximum gripping power. With a simple flip of the selector lever, you can quickly change the mode of operation without removing the chuck from the lathe. *Extra large 6" diameter *Heavy-duty construction *Dual-action, lever and key operation *Precision machining throughout *Smooth, dependable operation *Larger, heavier duty jaw slides *Larger range of movement *Stop pin to limit jaw exposure *Durable nickel plating to prevent rust *Accepts all VM120 chuck jaws *5 year warranty
Includes: insert lever, woodworm screw, jaw screws, 4 mm and 10 mm t-handle tightening keys, and threaded insert.

This inexpensive Apprentice™ Mini 4-Jaw Chuck is perfect for small projects and for use on today’s mini lathes where larger chucks can be too much" The convenient key operated design allows for one-hand operation and provides a tenacious grip. Precision machined for smooth, trouble-free operation, the Apprentice™ Mini 4-Jaw Chuck comes complete with a comprehensive range of jaws, woodworm screw and threaded adaptor. *Chuck body measures: 2-1/2" dia. *Direct threaded to fit 1"–8tpi Includes: No. 1 Jaws (Compression: 1/4" - 1-1/8", Expansion: 15/16" - 1-3/4") No. 2 Jaws (Compression: 15/16" - 1-3/4", Expansion: 1-3/8" - 2-3/16") No. 3 Jaws (Compression: 2-1/8" - 3", Expansion: 2-9/16" - 3-7/16") Pin Jaws (Compression: 1/64" - 15/16", Expansion Tier 1: 21/32" - 1-3/8"; Tier 2: 1-3/16" - 2") Woodworm screw 3/4" x 16TPI Threaded insert T-handle chuck key T-handle allen wrench Durable molded plastic storage case

The Jumbo Reversible Collar provides a 4-1/2" and 6-1/2" face that's ideal when chucking large bowls and platters. For use with the Precision Machine 3-in-1 Screw Chuck. *Machined from a solid aluminum billet

Replace a lost or damaged chuck key with a genuine Oneway® Replacement Chuck Key.

Replace a lost or damaged chuck key with a genuine Vicmarc® Replacement Chuck Key.

This 3" long Oneway® Chuck Spur mounts directly into Oneway chucks, making it unnecessary to remove the chuck from your lathe to do spindle work. The chuck spur is also ideal for roughing bowls between centers before mounting them in the chuck.

Hold pen mandrels, bottle stoppers, finials and other small work without marking or marring the wood's surface with Beall® Chuck Collets. *ER-32 collet *Precision ground collets for accuracy

The Vicmarc® Extended Dovetail Jaw Set fits VM100, VM120 and VM150 Chucks and can be used for traditional chuck using the exterior dovetail while providing the benefit of moving the work away from the headstock for more working room. Ue these jaws in expansion mode for chucking pre-drilled stock such as pepper mills, vases, and kaleidoscopes. *Durable machined steel *Black oxide finish
*VM100 Chuck Compression range: 1/4" - 1-13/16" Expansion range: 1-9/32" - 2-7/8"
*VM120/VM150 Chuck Compression range: 1/4" - 1-25/64" Expansion range: 1-5/16" - 2-15/32"

The Vicmarc® 5" Dovetail Jaw Set fits VM100, VM120 and VM150 Chucks and is capable of chucking bowls by clamping down on a foot or tenon using the jaw's interior dovetail or expanding into a dovetail recess with the jaw's exterior dovetail. *Durable machined steel *Black oxide finish
*VM100 Chuck Jaw Set Compression range: 5" - 6-1/2" Expansion range: 5-5/8" - 7-1/8"
*VM120/VM150 Chuck Jaw Set Compression range: 4-1/8" - 5-7/8" Expansion range: 5" - 6-3/4"

Hold pen mandrels, bottle stoppers, finials and other small work without marking or marring the wood’s surface with the Beall® Collet Chuck. *Requires collet for use *5 sizes of collets to choose from *1/32" range of movement *Precision ground collets for accuracy *Uses ER-32 type collets

The Vicmarc® Step Jaw Set fits VM100, VM120 and VM150 Chucks and can be used to grip different diameters of stock using the steps inside the jaw or to expand into a dovetail recess using the exterior dovetail. *Durable machined steel *Black oxide finish
*VM100 Chuck Jaw Set Compression range: 1-3/4" - 4-3/4" Expansion range: 3-7/8" - 5-3/8"
*VM120/VM150 Chuck Jaw Set Compression range: 2" - 6-1/8" Expansion range: 5" - 6-3/4"

The Oneway® Jumbo Jaw Set is ideal for making light finishing cuts on the backs of bowls or for external chucking on platters. *Durable machined aluminium *8 Rubber grippers protect the workpiece from marking or marring *Fits lathes with 12" capacity
*Talon Chuck Jumbo Jaw Set Compression range: 2-7/8" - 11-1/2" Expansion range: 4-7/8" - 12-1/2"
*Stronghold Chuck Jumbo Jaw Set Compression range: 2-3/4" - 11-1/2" Expansion range: 4-3/4" - 12-7/8"

The Vicmarc® Pin Jaw Set fits VM100, VM120 & VM150 Chucks and features a 1" spigot design that's ideal for use on pre-drilled work such as small boxes and pepper mills where extended reach is important. *Durable machined steel *1" Spigot design for extended reach *Black oxide finish\
*VM100 Chuck Jaw Set Compression range: 1/4" - 1-3/4" Expansion range: 1" - 2-3/8"
*VM120/VM150 Chuck Jaw Set Compression range: 1/4" - 1-3/4" Expansion range: 7/8" - 2-3/8"

The Vicmarc® 1-3/8" Shark Jaw Set fits VM100, VM120 and VM150 Chucks and can be used as traditional dovetail jaws or to clamp down on a tenon. Serrated ridges along the interior and exterior of the jaw provide an aggressive grip. *Durable machined steel *Black oxide finish
*VM100 Chuck Jaw Set Compression range: 1-3/8" - 2-7/8" Expansion range: 1-7/8" - 3-3/8"
*VM120/VM150 Chuck Jaw Set Compression range: 1-3/8" - 3" Expansion range: 2-1/8" - 3-7/8"

The Vicmarc® 1-3/4" Shark Jaw Set fits VM100, VM120 and VM150 Chucks and can be used as traditional dovetail jaws or to clamp down on a tenon. Serrated ridges along the interior and exterior of the jaw provide an aggressive grip. *Durable machined steel *Black oxide finish
*VM100 Chuck Jaw Set Compression range: 1-5/8" - 3-1/8" Expansion range: 2-1/8" - 3-1/2"
*VM120/VM150 Chuck Jaw Set Compression range: 1-7/8" - 3-5/8" Expansion range: 2-5/8" - 4-3/4"

The Vicmarc® Long Nose Jaw Set fits VM100, VM120 and VM150 Chucks and is designed to get the workpiece away from the headstock. These long nose jaws are capable of holding heavy work and can be used in either an expanding or contracting dovetail mode. They are also ideal for gripping round stock. *Durable machined steel *Black oxide finish
*VM100 Chuck Compression range: 7/8" - 1-3/8" Expansion range: 1-1/4" - 3"
*VM120/VM150 Chuck Compression range: 1-1/8" - 2-7/8" Expansion range: 1-3/4" - 3-5/8"

The Oneway® Profiled No. 2 Jaw Set features a serrated dovetail profile for increased gripping power on bowls, platters, and more. *Durable machined steel *Black oxide finish
*Talon Chuck Jaw Set Compression range: 1-5/8" - 3" Expansion range: 2" - 3-5/8"
*Stronghold Chuck Jaw Set Compression range: 2-3/8" - 4" Expansion range: 1-3/4" - 3-1/4"

The Oneway® Smooth No. 2 Jaw Set features a smooth dovetail profile for gripping power on bowls, platters, and more. *Smooth dovetail profile won't damage foot of workpiece *Durable machined steel *Black oxide finish
*Talon Chuck Jaw Set Compression range: 1-5/8" - 3" Expansion range: 2" - 3-5/8"
*Stronghold Chuck Jaw Set Compression range: 2-5/8" - 4-1/2" Expansion range: 2" - 3-1/2"

Without a doubt, these are the finest adjustable jaws on the market. The Vicmarc® 14" Adjusta-Jaw Set fits Vicmarc® VM100, VM120, and VM150 Chucks and is designed for holding work while making light finishing cuts or sanding the bottom of bowls and platters. *Premium four-sided, concave soft plastic grippers provide full contact with the workpiece *Durable machined aluminium *Fits lathes with 20" capacity
*VM100 Chuck Jaw Set Compression range: 4" - 14-1/2" Expansion range: 6-1/4" - 16-1/2"
*VM120/VM150 Chuck Jaw Set Compression range: 4" - 14-3/4" Expansion range: 6-1/4" - 16-1/2"

Without a doubt, these are the finest adjustable jaws on the market. The Vicmarc® 10" Adjusta-Jaw Set fits Vicmarc® VM100, VM120, and VM150 Chucks and is designed for holding work while making light finishing cuts or sanding the bottom of bowls and platters. *Premium four-sided, concave soft plastic grippers provide full contact with the workpiece *Durable machined aluminium *Fits lathes with 16" capacity
*VM100 Chuck Jaw Set Compression range: 3-1/2" - 10-5/8" Expansion range: 5-3/4" - 12-1/2"
*VM120/VM150 Chuck Jaw Set Compression range: 3-1/2" - 10-3/4" Expansion range: 5-3/4" - 12-1/2"

The Oneway® Profiled Spigot Jaw Set features a serrated jaw profile for increased gripping power and is ideal for use on pre-drilled work such as small boxes and pepper mills where extended reach is important. *Durable machined steel *Serrated jaw profile for increased gripping power
*Talon Chuck Jaw Set Compression range: 1/4" - 1-3/4" Expansion range: 11/16" - 2-1/2"
*Stronghold Chuck Jaw Set Compression range: 3/8" - 2" Expansion range: 1-1/8" - 2-5/8"

The Oneway® Profiled No. 3 Jaw Set features a serrated jaw profile for increased gripping power along with the mass and size necessary for holding large bowls and vessels. *Serrated profile for increased gripping power *Durable machined steel *Black oxide finish
*Talon Chuck Jaw Set Compression range: 3-3/8" - 4-3/4" Expansion range: 3-7/8" - 5-3/8"
*Stronghold Chuck Jaw Set Compression range: 3-7/8" - 5-1/4" Expansion range: 4-1/2" - 6"

The Oneway® Smooth Spigot Jaw Set features a smooth jaw profile that won't damage the foot of the workpiece and is ideal for use on pre-drilled work such as small boxes and pepper mills where extended reach is important. *Durable machined steel *Smooth jaw profile won't damage foot of workpiece
*Talon Chuck Jaw Set Compression range: 1/4" - 1-7/8" Expansion range: 1-1/8" - 2-3/4"
*Stronghold Chuck Jaw Set Compression range: 3/8" - 2" Expansion range: 1" - 2-5/8"