It's great to have a sketch pencil handy to help you put your ideas on paper before they get away. The Artisan® Artist's Sketch Pencil features professional quality 5.6mm 4B lead and a top quality "plunger" type lead holder mechanism that is guaranteed to hold the lead firmly in place at all times, while allowing you to instantly adjust the lead position with the push of your thumb. In addition, a convenient built-in lead sharpener inside the cap helps you keep the lead sharp at all times. Your sketch pencil will look great with any wood you choose and is guaranteed to continue looking good for years to come. The Artisan® Artist's Sketch Pencil is guaranteed to meet your sketching needs or your money back. *"Plunger" type mechanism holds lead securly in place *Built-in lead sharpener *5.6mm lead *Quick release operation Specifications: Finished size: 9/16" x 4-3/4" Minimum blank size: 3/4" x 3/4" x 5"
Includes: Instructions 5.6mm lead (4B soft) Pencil components (blank not included)
Items needed to complete: Drill bit: 15/32" Bushings: Artisan® Artist's Sketch Pencil Bushings 7mm Pen mandrel Barrel trimmer head Pilot shaft: 15/32"
Replacement items: Lead: 5.6mm (4B soft) Brass tubes: Artisan® Artist's Sketch Pencil Tube Components (if available): Call (800) 551-8876

The simple design of the Artisan® Slimline Pencil makes turning quick and easy. It features a click style cartridge transmission for dependable, trouble free operation. Made of premium grade components, all Slimline Pencils are backed by our 100% satisfaction guarantee. *Quality click mechanism *0.7mm lead Specifications: Finished size: 5/16" x 5" Minimum blank size: 9/16" x 4-5/8"
Includes: Instructions 0.7mm lead Pencil components (blank not included)
Items needed to complete: Drill bit: 7mm Bushings: Artisan® 7mm Slimline Style Bushings 7mm Pen mandrel Barrel trimmer head Pilot shaft: 7mm
Replacement items: Lead: 0.7mm Brass tubes: Artisan® Slimline Replacement Tube Set Components (if available): Call (800) 551-8876

Now you can enjoy the popular look of the Jr. Gentlemen's Pen in a convenient ballpoint pen with Artisan® Jr. Gentlemen's Ballpoint Pen Kit. *Bi-directional twist mechanism *Parker® type ballpoint refill Specifications: Finished size: 9/16" x 5-1/2" Minimum blank size: 3/4" x 3/4" x 5"
Includes: Instructions Parker® type ballpoint refill Pen components (blank not included)
Items needed to complete: Drill bits: 25/64" and 15/32" Bushings: Artisan® Jr. Gentlemen's Ballpoint Pen Bushings 7mm Pen mandrel Barrel trimmer head Pilot shaft: 25/64" and 15/32"
Replacement items: Ink refill: Parker® type ballpoint Brass tubes: Artisan® Jr. Gentlemen's Ballpoint Pen Tube Set Components (if available): Call (800) 551-8876

The Artisan® Perfume Atomizer features 10k Gold plating and solid brass parts. The woodgrain is emphasized with the size of the Perfume Atomizer being 5/8" in diameter (or larger if you choose) by 3-3/8" long. The perfume is stored in a 1/10th oz. removable glass vial inside the atomizer body to prevent contact with the brass parts. A small suction syringe is included with kit for filling the vial with perfume. The Perfume Atomizer is turned on a standard pen mandrel using the set of bushings listed below. The wood blank requires a 19/32" diameter hole. We recommend using material at least 1" in diameter x 4" long to allow for decorative woodturning on the barrels. *10k Gold plating *Solid brass parts *1/10oz. removable glass vial *Suction pipette for filling vial w/ perfume *Turns on a standard pen mandrel Specifications: Dimensions: Approx. 5/8" dia. x 3-3/8" Dimensions (atomizer): 7/16" dia. x 2-1/2" Minimum blank size: desired width (at least 1") x 4"
Includes: Instructions Project components (blank not included) (1) Atomizer (spray mechanism w/ glass vial) (1) Suction pipette
Items needed to complete: Drill bit: 19/32" Bushings: Artisan® Perfume Atomizer Kit Bushings 7mm pen mandrel Barrel trimmer head Pilot shaft: 19/32" (requires Apprentice® Barrel Trimmer Adapter Blank)
Replacement items: Brass tubes: Artisan® Perfume Atomizer Replacement Tubes Atomizer: Artisan® Perfume Atomizer Replacement Spray Mechanism Components (if available): Call (800) 551-8876

This popular bolt action pen features a relief cut trophy mount on the clip along with a hunting scene engraved on the body and rifle scope style clip. This is the perfect pen for those who love to hunt.
*Bolt Action Mechanism *Antique finish *Parker® type refill *Made by Penn State Industries Specifications: Finished size: approx. 1/2" x 5-5/16" long Minimum blank size: 3/4" x 3/4" x 3-1/2"
Includes: Instructions Parker® type ballpoint refill Pen components (blank not included)
Items needed to complete: Drill bit: 3/8" Bushings: PSI Bolt Action Bushing Set 7mm Pen mandrel Barrel trimmer head Pilot shaft: 3/8"
Replacement items: Ink refill: Parker® type ballpoint Brass tube: PSI Bolt Action Pen Tube

The sophisticated Apprentice® Manhattan Click Pen Kit features a modern, definitive style along with a quality click mechanism and premium components that are sure to impress. *Affordable, high quality pen kit *Stylish, modern design *Single tube design looks great and is easy to turn *Parker® type ballpoint refill Specifications: Finished size: 1/2" x 5-3/8" Minimum blank size: 5/8" x 5/8" x 3-1/4"
Includes: Instructions Parker® type ballpoint refill Pen components (blank not included)
Items needed to complete: Drill bit: 13/32" Bushings: Apprentice® Chicago & Manhattan Pen Bushings 7mm Pen mandrel Barrel trimmer head Pilot shaft: 13/32"
Replacement items: Ink refill: Parker® type ballpoint Brass tubes: Apprentice® Manhattan Tube Components (if available): Call (800) 551-8876

Designed primarily for holding hollow forms between centers while turning and finishing the base, the Kelton® Woodchucker Mandrel mounts directly in the headstock and provides two support points to hold the work securely in place. The end of the mandrel accepts any sanding pad with a 1/4" diameter shaft which acts as a support pad inside the bottom of the work piece while the adjustable 3" faceplate with turned wood adapter fits into the top of the piece for added stability. Add an extra faceplate to the mandrel and you can turn pre-drilled projects such as peppermills, kaleidoscopes, etc. *Includes one 3" faceplate and mandrel shaft *Sanding pad not included *Overall length 12" (not including morse taper) *3/4" Dia. shaft *No. 2MT

The .50 caliber BMG pen has a special "wow" factor of its own that makes it very popular among outdoorsmen and military enthusiasts. This ballpoint twist pen kit utilizes a genuine once-fired .50 BMG case, single 7 mm tube, cross style ballpoint twist mechanism and 24k Gold plated nib. Instructions included. *Cross® type ballpoint refill *Twist operation Specifications: Finished size: 9/16" x 5-1/2" to 6-3/8" Minimum blank size: 3/4" x 3/4" x 2"
Includes: Instructions Cross® type ballpoint refill Pen components (blank not included)
Items needed to complete: Drill bit: 7mm Bushings: PSI 50 Caliber Machine Gun Pen Bushings 7mm Pen mandrel Barrel trimmer head Pilot shaft: 7mm
Replacement items: Ink refill: Cross® type ballpoint Brass tube: PSI 50 Caliber Machine Gun Tube

The Artisan® Detachable Key Ring has two key holders, but one end can be detached easily by pressing the plunger locking mechanism. The solid brass 10k Gold plated parts work smoothly, and when the plunger is re-inserted, the key ring is locked securely in place. *10k Gold plating *Two 7/8" dia. split rings *Push release detachable key ring (one side only) Specifications: Finished size: 3/8" x 3-3/8" Minimum blank size: 1/2" x 1/2" x 2-1/2"
Includes: Instructions Two split rings Project components (blank not included)
Items needed to complete: Drill bit: 7mm Bushings: Artisan® Detachable Key Ring Bushings 7mm Pen mandrel Barrel trimmer head Pilot shaft: 7mm
Replacement items: Brass tube: Artisan® Detachable Key Ring Tube Artisan® Split Ring Components (if available): Call (800) 551-8876

If you’re looking to step your pen turning up a notch, the PSI Majestic Squire Pen Kit is here to help. It features two-tone styling with decorative bands and an end cap accented with a delicate pattern. The sturdy twist mechanism and Parker style refill ensure dependable twist operation and smooth writing. Uses a single 3/8" tube. *Twist operation *Parker® style refill *Made by Penn State Industries Specifications: Finished size: 1/2" x 51/8" long Minimum blank size: 5/8" x 5/8" x 3-1/4"
Includes: Instructions Parker® type ballpoint refill Pen components (blank not included)
Items needed to complete: Drill bit: 3/8" Bushings: PSI Pen Kit Bushing Set 7mm Pen mandrel Barrel trimmer head Pilot shaft: 3/8"
Replacement items: Ink refill: Parker® type ballpoint Brass tubes: PSI Majestic Squire Pen Tubes

This unique pen kit combines elements of Victorian science fiction and the industrial revolution into a single bolt action pen kit with classic steampunk styling.
Rivet designs, flat head screws, replica Gatling gun barrels and antique finish work together to make this pen kit Steampunk cool and fun to use too!
*Bolt Action Mechanism *Antique finish *Traditional Steampunk styling *Parker® type refill *Made by Penn State Industries Specifications: Finished size: approx. 9/16" x 5-13/16" Minimum blank size: 3/4" x 3/4" x 2-1/2"
Includes: Instructions Parker® type ballpoint refill Pen components (blank not included)
Items needed to complete: Drill bit: 3/8" Bushings: PSI Victorian, Phoenix Rising, and Steampunk Bushing Set 7mm Pen mandrel Barrel trimmer head Pilot shaft: 3/8"
Replacement items: Ink refill: Parker® type ballpoint Brass tube: PSI 3/8" x 10" Replacement Tubes

Shorter and thinner than standard 5.6mm lead sketch pencils, the PSI Mini Sketch Pencil Kit is an easy to turn single tube pencil kit that’s perfect for smaller hands and even for use as an everyday pencil. Use it in the office, shop or studio, the tough 3mm lead and precision collet mechanism are up to the task. Uses a single 8mm tube. *Built-in lead sharpener *90mm of 3mm pencil lead *Quick release collet operation Specifications: Finished size: 1/2" x 4-5/16" Minimum blank size: 5/8" x 5/8" x 4-1/2"
Includes: Instructions 90mm of 3mm lead Pencil components (blank not included)
Items needed to complete: Drill bit: 8mm Bushings: PSI Mini Sketch Pencil Bushings 7mm Pen mandrel Barrel trimmer head Pilot shaft: 8mm
Replacement items: Lead: 3mm Brass tubes: PSI Mini Sketch Pencil Tubes

A ballpoint pen and stylus in one, the new Apprentice® Manhattan Click Pen/Stylus Kit features a modern, definitive style along with a quality click mechanism and stylus tip that are sure to impress. The combination stylus/pen design is convenient, functional and makes life less complicated. *Affordable, high quality pen kit *Quality stylus tip *Stylish, modern design *Single tube design looks great and is easy to turn *Parker® type ballpoint refill Specifications: Finished size: 1/2" x 5-3/8" Minimum blank size: 5/8" x 5/8" x 3-1/4"
Includes: Instructions Parker® type ballpoint refill Pen components (blank not included)
Items needed to complete: Drill bit: 13/32" Bushings: Apprentice® Chicago & Manhattan Pen Bushings 7mm Pen mandrel Barrel trimmer head Pilot shaft: 13/32"
Replacement items: Ink refill: Parker® type ballpoint Brass tubes: Apprentice® Manhattan Click Stylus Tube Components (if available): Call (800) 551-8876

The JET JWL-1640EVS Wood Lathe is loaded with cutting-edge features that distinguish it from others in its class. Included is a sliding headstock that also pivots 360 degrees, electronic infinitely variable speed from 40-3,200 RPM, and a newly designed headstock locking handle.
*Headstock slides and rotates for maximum versatility *Extended spindle nose houses dual headstock spindle bearings *Improved tailstock quill locking mechanism incorporates an anti-rotation key *Tailstock features Acme threads for smooth and durable movement *Banjo uses non-marring, positive locking wedge system to securely hold tool post *Tool post locking mechanism designed for year of consistent strength *Spindle lock latch frees up both hands *Electronic infinitely variable speed from 40-3,200 RPM *36 integrated indexing positions *Newly designed headstock locking handle accessible from front of lathe *Convenient leg-mounted tool holder *Inverter is enclosed for added protection *E Drive Inverter features a built in EMI filter *Conveniently located digital readout *Rubber tool mat on top of headstock Specifications: Swing Over Bed: 16-1/2" Swing Over Tool Rest Base: 12-7/8" Distance Between Centers: 40" Spindle Height: 44-1/2" from floor Headstock Movement: Slide & Rotate Spindle Bore: 5/8" Tailstock Bore: 3/8" Spindle Taper: 2MT Quill Taper: 2MT Quill Travel: 4-1/4" Spindle Thread: 1-1/4" x 8 TPI Spindle Speeds: High range 120-3,200 rpm; Low range 40-1,200 rpm Speed Range: 40-3,200 rpm Number of Indexing Positions: 36 Bed Construction: Cast Iron Motor: 1-1/2 HP Voltage: 115 V Recommended Circuit Size: 20 Amps Net Weight: 375 lbs Shipping Weight: 440 lbs
Standard Accessories: 14" Tool Rest Tool Rest Extension 3" Faceplate Faceplate Wrench 4-Prong Drive Center Live Center Revolving Cone Center Knockout Rod
JET stock number 719500 JET Model JWL-1640EVS

Boring pepper mills and drilling through the hardest of woods is a breeze with Colt® MaxiCut® Forstner bits. These premium HSS bits feature a patented cutter head design that cuts up to 6 times faster than conventional forstner bits while lasting many times longer. In addition, MaxiCut® Forstner bits feature a patented RotaStop® quick release shank design that locks positively into standard drill chucks in addition to RotaStop® extension shanks and RotaStop® morse taper adapters. To release, grip one section with a set of pliers and twist the other section a 1/4 turn and you’re done. It’s that easy.
*The best system in the world for boring peppermills *Cutting head cuts equally well on side or flat grain *Chip breakers remove chips and reduce heat buildup *Cuts hard woods with ease and can be resharpened *Lasts several times longer than other forstner bits *Morse taper adapters available for mounting in headstock/tailstock Maxi Cut® Bits are compatible only with Maxi Cut® extenders and adapters

Near the small town of Redmond, in south central Utah, natural sea salt is carefully extracted from deep within the earth from ancient evaporated sea beds which have been protected from man made pollutants for millions of years. Redmond Minerals® Natural Sea Salt is brought to you in its pure, natural state without additives, chemicals, or heat processing of any kind. This is genuine ancient sea salt, full of delicate sweet salt flavor and natural goodness-the way salt was meant to be savored. *Delicious natural sea salt *Ideal for gifting with your custom turned salt mill *Coarse crystal form *16 oz. *Made in USA

Tired of lifting your heavy tailstock off the floor and wrestling it onto the lathe? With the Powermatic Tailstock Swing Away, you’ll never have to do it again! The Powermatic Tailstock Swing Away simply bolts onto your lathe bed allowing you to store your tailstock conveniently out of the way without removing it from the lathe. Just loosen the locking handle and swing the tailstock down and away for storing. When you need the tailstock, simply swing it up and into position, lock it in place and you’re ready to go! And thanks to the sturdy built-in spring assist, you feel only a fraction of the weight of the tailstock during operation making it even easier to do! *Bolts directly to lathe using existing bolt holes- no modification required *Spring assist mechanism reduces felt weight during operation *Eliminates strain of lifting tailstock on/off the lathe *Makes storing tailstock quick and easy *Tailstock stores free and clear of bed ways *Solid steel construction *Stop plate prevents tailstock from falling *Fits all Powermatic 3520 series and 2020 lathes *Will not fit 4224 lathes Powermatic stock number PM-SA

The Indigo Pen is a mid-sized twist action pen featuring graceful fluted lines on the cap and tip for a classic look and feel. Measuring just 5-1/4" long, the compact size provides optimum balance for comfortable writing and makes it an ideal daily use pocket pen. In addition, the Indigo Pen features a stylish roller clip that makes clipping to shirts and planners effortless while the long lasting Parker® type refill makes for less frequent refill changes. *Twist operation *Single tube design for clean, classic look *Robust twist mechanism for reliability *Compact 5-1/4" size ideal for daily use *Roller clip for easy on-off pockets and planners *Premium plating and components throughout *Long lasting Parker® type refill Specifications: Finished size: 7/16" x 5-1/4" Minimum blank size: 3/4" x 3/4" x 5"
Includes: Instructions Parker® type ink refill Pen components (blank not included)
Items needed to complete: Drill bits: 3/8" Bushings: Artisan® Indigo Pen Bushings 7mm Pen mandrel Barrel trimmer head Pilot shafts: 3/8"
Replacement items: Ink refill: Parker® type ballpoint Brass tubes: Artisan® Indigo Pen Tube Components (if available): Call (800) 551-8876

The Artisan® Toolbox Pencil kit features a chrome plated hexagonal cap and center band that lends a robust look and prevents it from rolling off your desk or workbench. The Artisan® Toolbox Pencil is perfect for general shop use, sketching and general note taking. The mechanism houses a massive 4-3/4" long, 5.6 mm lead that creates a dark line that's easy to see and can be adjusted in or out to expose just the right amount of lead. A sharpener housed in the pencil cap will bring the lead back to a fine point in only seconds. *Chrome plating *Built-in lead sharpener *5.6mm lead *No-roll hexagonal centerband *Quick release operation Specifications: Finished size: 1/2" x 4-3/4" Minimum blank size: 3/4" x 3/4" x 5"
Includes: Instructions 5.6mm lead (4B soft) Pencil components (blank not included)
Items needed to complete: Drill bit: 11mm Bushings: Artisan® Toolbox Pencil Bushings 7mm Pen mandrel Barrel trimmer head Pilot shaft: 13/32" (due to extra thick brass tubes the 11mm pilot shaft will not work)
Replacement items: Lead: 5.6mm Brass tubes: Artisan® Toolbox Pencil Replacement Tube Set Components (if available): Call (800) 551-8876

The Exemplar Pen is a great looking, slightly robust twist pen that features a low profile diamond texture on the tip and twist cap that enhances the overall look of the pen while providing a comfortable, positive grip. Measuring just 4-7/8" long, the compact size provides optimum balance for comfortable writing and makes it an ideal daily-use pocket pen. In addition, the Exemplar Pen features a spring steel clip that accommodates most any thickness of shirt pocket or planner while the long lasting Parker® type refill eliminates the need for frequent refill changes. *Twist cap operation *Single tube design for clean, classic look *Robust twist mechanism for reliability *Compact 4-7/8" size ideal for daily use *Spring steel clip for easy on-off pockets and planners *Premium plating and components throughout *Long lasting Parker® style refill Specifications: Finished size: 1/2" x 4 7/8" Minimum blank size: 3/4" x 3/4" x 3" Includes: Instructions Parker® type ink refill Pen components (blank not included) Items needed to complete: Drill bits: 23/64" Bushings: Artisan® Exemplar Pen Bushings 7mm Pen mandrel Barrel trimmer head Pilot shafts: 23/64" Replacement items: Ink refill: Parker® type ballpoint Brass tubes: Artisan® Exemplar Tube Components (if available): Call (800) 551-8876

The Deco Pen offers art deco styling in a daily writer you can enjoy everyday. The low profile knurled pattern on the twist cap makes operation easy while an engraved decorative motif on the cap adds to the overall styling. Measuring just 4-7/8" long and 5/8" diameter, the Deco has just the right heft for those who love slightly beefier pens. The pen clip accommodates most any thickness of shirt pocket or planner while the long lasting Parker® type refill provides plenty of premium ink for less frequent refill changes. *Twist cap operation *Knurled twist cap for easy operation *Single tube design for clean, classic look *Robust twist mechanism for reliability *Compact 4-7/8" length ideal for daily use *Spring clip for easy on-off pockets and planners *Premium plating and components throughout *Long lasting Parker® type refill Specifications: Finished size: 5/8" x 4-7/8" Minimum blank size: 3/4" x 3/4" x 3-1/4"
Includes: Instructions Parker® type ink refill Pen components (blank not included) Items needed to complete: Drill bits: 27/64" Bushings: Artisan® Deco Pen Bushings 7mm Pen mandrel Barrel trimmer head Pilot shafts: 27/64" Replacement items: Ink refill: Parker® type ballpoint Brass tubes: Artisan® Deco Tube Components (if available): Call (800) 551-8876

The JBOS-5 Benchtop Spindle Sander has a 1/2HP motor, and a large 14-1/2" tilting table. A heavy-duty worm gear system provides one-inch oscillating action, which prolongs sleeve life and helps prevent burnishing of the workpiece. Four inserts are provided, and 5 spindles with sanding sleeves.
*1" oscillating action reduces friction heat to protect wood and prolong sleeve life *Main spindle support runs on precision ball bearings and is oscillated by a heavy-duty worm and gear mechanism for consistent performance *Oscillation gears run in a sealed lubricated box to prolong their life and durability *Table tilts to 45° to accommodate bevel sanding projects *Removable on/off safety switch prevents accidental start-up *Powerful 1/2HP induction motor easily handles the toughest sanding projects *Built-in 2" dust port keeps dust and debris out of the air *Spindles have threaded ends for quick, easy changes *Four table inserts are provided (3/4" and 1" Oblong, 3/4" and 1" Round), to prevent dust and debris from falling into the motor, and help protect operator. *Built-in storage racks keep spindles and table inserts handy *Includes four non-skid rubber feet keep machine stable during use *Includes 1/4", 1/2", 5/8", 1-1/2", 2" spindle assemblies with 100 grit paper Specifications: Style: Benchtop Oscillations Per Minute: 30 Oscillation Stroke: 1" Spindle Speed: 1,725 RPM Table Size: 14-1/2" x 14-1/2" Table Tilt: 0 - 45 Degrees Motor Power: 1/2 HP Motor Voltage: 115 Motor Amps: 3
JET stock number 708404

The new Powermatic 3520C wood lathe builds upon the venerable 3520B with modern styling and exciting new features. The 3520C features a moveable control box, redesigned spindle lock, digital spindle indexing readout, adjustable riser blocks for 6" of height adjustment, and more. Cast iron construction, attention to detail, and user friendly design make Powermatic lathes an excellent value for turners of all skill levels. Backed by Powermatic's 5 year warranty and service centers throughout the USA. New Features *Moveable control box *Redesigned spindle lock *Includes 4" riser blocks for height adjustment *Digital spindle indexing readout *ACME thread tailstock quill *Increased weight for stability Capacities Swing over bed: 20" Swing over tool rest: 15-3/4" Distance between centers: 35-1/2" (working distance with centers installed) Maxium outboard capacity: 38" (with optional bed extension in low position)
Headstock and Tailstock Spindle thread: 1-1/4" x 8 TPI Spindle taper: No. 2MT Spindle through bore diameter: 5/8" Spindle speeds: low range 15-1200 RPM; high range 40-3200 RPM Tailstock quill taper: No. 2MT Tailstock through bore diameter: 3/8" Taisltock quill travel: 4-1/2"
Tool Rest Tool rest width: 14" Tool rest post diameter: 1" Tool rest locking mechanism: Bushing
Motor and Electrics Motor power: 2HP Power requirements: 220V, 1 phase Recommended circuit size: 20 Amps Drive system: Poly V belt, 2-step pulley
Measurements Assembled size (LxWxH): 64" x 24" x 46" (without 4" riser blocks) Bed length: 51" Spindle height from floor: 40-5/8" (without 4" riser blocks) Bed gap: 2-1/2" Net weight: 726 lb. Shipping weight: 770 lb.
Powermatic part # 1353001

The PM1500 packs many of the features traditionally only found on larger bandsaws, and brings them to a new, category-redefining, 15" size. As with every product Powermatic builds, the PM1500 pushes the limits of design, innovation, and durability. It truly is The Gold Standard.
*14-1/2" of throat and 14" of resaw provide more capacity than a traditional 14" bandsaw *Sturdy cast iron table and trunnion assembly offers maximum rigidity for heavy work pieces *Exclusive Powermatic T-Square style Accu-Fence maximizes accuracy and safety *The Accu-Fence has complete adjustability for aligning to blade and squaring to table *Positive locking cam with pressure adjustment *Oversized side plate can be used in the horizontal or vertical position *Solid steel resaw pin for optimum ridgidity *Blade tension release with electrical interlock prevents the bandsaw from starting when the blade is de-tensioned or released *Heavy duty upper wheel support and tracking mechanism for smooth operation *Solid cast iron upper and lower wheels create the momentum needed for heavy resaw *High end blade guides with tool less adjustment provide stability, increasing cut accuracy *Four sided blade guard for optimum protection *Integrated foot brake stops a coasting blade *Magnetic Switch protects the motor from harm due to potential electrical supply issues *Heavy duty 3 horsepower motor provides power needed for all projects Specifications: Resaw Capacity: 14" Blade Length: 153" Table Size: 21-1/2" x 16" Table Height from Floor: 40" Maximum Saw Blade Width: 1" Minimum Saw Blade Width: 1/8" Table Tilt: 10 Left, 45 Right Dust Collection Minimum CFM Required: 600 Dust Port Outside Diameter: 4" Motor Power: 3 HP Motor Phase: 1 Motor Voltage: 230 Motor Amps: 12
Powermatic part # 1791500

Powermatic PM2800B 18" Variable Speed Drill Press
The Powermatic® 18" Variable Speed Drill Press was designed with the woodworker in mind. Its design has many convenient features that other so-called woodworking drill presses do not offer. The twin LED lights are designed to eliminate cast shadows on the workpiece often produced by conventional lights. The twin lasers will pinpoint the bit entry on the workpiece. The expandable work table is the industry's largest in this class. The single handle speed changer allows you to run the full range of speeds without ever touching a belt, and the front mounted digital readout displays the exact speed the spindle is running. It also features a larger motor than any other drill press in its class for maximum torque.
Features: *Powered by a heavy duty 1HP, 1Ph, 115/230V TEFC motor for maximum torque *Mechanical variable speed allows for full range of speed with no belt changes *6" Quill travel with one revolution of the handle *Fence system adjustable for a perfect 90 degree relationship to the table, for rapid stock alignment *Adjustable material stop makes repetitive actions accurate and quick *A digital RPM readout allows user to optimize the spindle speed to the application *Laser guides provide an accurate indication for tool point *Keyless chuck makes bit changes easier *Reversible handles can be mounted on either side of the machine for more comfortable working of the quill *Two independent LED work lights eliminate shadows *Work table can be rotated to a full 90 degree position *Replaceable square table insert with leveling screws make it flush with the table top *Oversize cast iron base for added stability *Safety key prevents accidental starting
Specifications: *Swing: 18" *Spindle Travel: 6" *Spindle Distance to Table (max): 27-3/8" *Spindle Distance to Base: 46-1/4" *Spindle Speed: 250 - 3000 RPM *Spindle Taper: MT-2 / JT-3 *Chuck Size: 5/8" *Chuck Distance to Table: 24-1/2" *Chuck Distance to Base: 43-13/32"
Powermatic part # 1792800B