You Searched: negative rake scraper
The Crown Negative Rake Shear Scraper combines the unique advantages of a negative rake scraper and the ability to create fine shearing cuts into a single, user-friendly tool that’s economical and versatile.
The Crown Negative Rake Shear Scraper features an adjustable cryogenically treated high-speed steel cutter mounted on a sturdy 5/8" diameter round shaft at a negative rake angle. The round tool shank makes rolling the tool side to side when making shearing cuts smooth and effortless. It can also be used to make standard scraping cuts by holding the tool in a traditional scraping position.
Regardless of the type of cut, the Crown Negative Rake Shear Scraper helps you remove small tool marks and achieve a silky smooth surface with little or no tear-out on dense materials, exotic woods, and end grain areas too.
Instructions included.
*Fully adjustable cutter system
*Cryogenically treated high-speed steel cutter
*Negative rake cutter angle for clean tear-free cuts
*Round shank design for smooth side-to-side transition
*Can be used for making standard scraping cuts
*Ideal for making shear-scraping cuts
*Highly recommended for use on exotic and hard woods
*Produces smooth finish with little or no tear-out
*Supplied with genuine beech handle
Tool specifications:
Cutter size: 7/8" x 1-29/64"
Shaft length: 7"
Shaft diameter: 5/8"
Handle length: 12-1/2"
Overall tool length: 19-1/2"
Note: In order to achieve the best possible results, it’s essential that the cutter have a burr on the cutting edge because the burr does the cutting. When the burr is gone, the cutter is dull and should be sharpened to create a fresh burr edge. This can be done with the cutter still mounted on the tool by sharpening the cutter on a grinder or honing the edge of the cutter by hand using a CBN or diamond hone. When there is a burr on the edge of the cutter, you’re ready to go.
*Read the how-to article
This round point scraper is supplied with a negative rake profile to produce a smoother finish on all types of materials as well improve overall controllability. *6" Blade *M2 High-speed steel *Premium ash handle Artisan® woodturning tools provide an economical alternative to other more expensive high-speed steel tools without sacrificing quality or performance. Though not as highly polished as standard Henry Taylor tools, Artisan® tools are made of the same top quality heat-treated M2 high-speed steel and premium ash handles as standard Henry Taylor tools, but at a lower price.
The negative rake grind gives this scraper the ability to produce a clean finishing cut on end-grain, hard and high-figured woods as well as stabilized wood and plastic pen blanks without self-feeding.
When freshly sharpened, traditional tools tend to self-feed into hard and high figured woods resulting in a dig-in that results in torn grain.
The 3/4" scraper is recommended for boxes, bowls and platters while the 1/4" scraper is ideal for small boxes, stabilized blanks and plastics.
*1/4" Thick
*M2 High-speed steel
*Premium ash handle
*Solid brass ferrule
Note: Tool is used with the long bevel in the upright position.
Robert Sorby® M2 high-speed steel turning tools have long been a popular line of woodturning tools. Still made in-house in Sheffield, England, their special attention to heat treating, material quality, and overall craftsmanship have made them one of the top choices in woodturning tools.
This square point scraper is supplied with a negative rake profile to produce a smoother finish on all types of materials as well improve overall controllability. *6" Blade *M2 High-speed steel *Premium ash handle Artisan® woodturning tools provide an economical alternative to other more expensive high-speed steel tools without sacrificing quality or performance. Though not as highly polished as standard Henry Taylor tools, Artisan® tools are made of the same top quality heat-treated M2 high-speed steel and premium ash handles as standard Henry Taylor tools, but at a lower price.
The 1" Negative Rake Scraper by Carter and Son Toolworks is a superb scraping tool made from M42 high speed steel for optimum edge holding ability and its ability to be sharpened to a keen edge.
Negative rake scrapers are superior to traditional scrapers because of their ability to produce a clean finishing cut on end-grain, hard and high-figured woods as well as stabilized wood and plastics. The negative rake angle on the Negative Rake Scraper by Carter and Son makes it non-aggressive and easy to control when making heavy or light cuts without the risk of a catch which is common when using standard scrapers.
*Includes a Carter & Son aluminum handle
Specifications:
Blade measures: 1" wide by 3/8" thick
Overall blade length: 9-1/2"
Tang size: 3/4" dia.
M42 high speed steel is considered by many top turners to be the "holy grail" of tool steel for woodturning. Unlike other types of high speed steel that sacrifice extreme edge retention for the ability to be honed to a keen edge, or vice versa, M42 offers both for optimum performance you can count on.
*Extreme edge retention
*Sharpens to a very keen edge
*Sharp and ready to use straight from the package
*Made in the USA
Replacement Cutter for the Crown Negative Rake Shear Scraper.
In order to achieve the best possible results, it’s essential that the cutter have a burr on the cutting edge because the burr does the cutting. When the burr is gone, the cutter is dull and should be sharpened to create a fresh burr edge. This can be done with the cutter still mounted on the tool by sharpening the cutter on a grinder or honing the edge of the cutter by hand using a CBN or diamond hone. When there is a burr on the edge of the cutter, you’re ready to go.
Supplied with a negative rake profile to reduce tear-out and improve controllability, this general purpose scraper produces a smooth surface on all types of materials. *6-1/2" Blade *M2 High-speed steel *Premium ash handle *Solid brass ferrule Crafted in Sheffield, England for more than 150 years, Henry Taylor® M2 high-speed woodturning tools combine traditional forging techniques with state-of-the-art hardening and finishing processes to bring you the finest woodturning tools in the world. Henry Taylor® premium M2 high-speed steel tools go through rigorous testing to ensure proper hardness and edge-holding ability before being branded with the trusted Henry Taylor trademark. All tools are backed by our 100% satisfaction guarantee.
The Henry Taylor® M2 HSS Square Point Negative Rake Scraper allows you to easily create flat surfaces on spindles and the inside of boxes and bowls. *6" Blade *M2 High-speed steel *Premium ash handle *Solid brass ferrule Crafted in Sheffield, England for more than 150 years, Henry Taylor® M2 high-speed woodturning tools combine traditional forging techniques with state-of-the-art hardening and finishing processes to bring you the finest woodturning tools in the world. Henry Taylor® premium M2 high-speed steel tools go through rigorous testing to ensure proper hardness and edge-holding ability before being branded with the trusted Henry Taylor trademark. All tools are backed by our 100% satisfaction guarantee.
The GL1 Negative Rake French Curve Scraper is designed to help you refine and smooth internal curves on bowls and platters. Ground to a dual 33 degree negative rake angle, the GL1 is very versatile and very user friendly making it a favorite among Glenn’s workshop students. Made by Hamlet Craft Tools, Sheffield, England.
*Made from M2 high speed steel
*Exceptional edge holding ability
*French curve profile for refining the internal curve on bowls
*33 Degree negative rake angle offers versatility and control
*Heavy 3/8" thick cross section eliminates flex and minimizes vibration
*Supplied with beautiful 16" stained Beech hardwood handle
*Backed by 100% Satisfaction Guarantee
Specifications:
Blade: 3/8" x 1-3/8" x 6-1/2" long.
Overall length: 23"
The GL2 Round Nose Negative Rake Scraper is designed to help you perfect gentle curves on the interior of bowls and platters. The round nose shape makes this "do it all" scraper suitable for most scraping applications. Made by Hamlet Craft Tools, Sheffield, England.
*Made from M2 high speed steel
*Exceptional edge holding ability
*Ideal general purpose scraper for gentle shaping and clean up work
*33 Degree negative rake angle offers versatility and control
*Heavy 3/8" thick cross section eliminates flex and minimizes vibration
*Supplied with beautiful 16" stained Beech handle
*Backed by 100% Satisfaction Guarantee
Specifications
Blade: 3/8" x 1-3/8" x 6-1/2" long.
Overall length: 22"
The 1" Negative Rake Scraper by Carter and Son Toolworks is a superb scraping tool made from M42 high speed steel for optimum edge holding ability and its ability to be sharpened to a keen edge.
Negative rake scrapers are superior to traditional scrapers because of their ability to produce a clean finishing cut on end-grain, hard and high-figured woods as well as stabilized wood and plastics. The negative rake angle on the Negative Rake Scraper by Carter and Son makes it non-aggressive and easy to control when making heavy or light cuts without the risk of a catch which is common when using standard scrapers.
Specifications:
Blade measures: 1" wide by 3/8" thick
Overall blade length: 9-1/2"
Tang size: 3/4" dia.
M42 high speed steel is considered by many top turners to be the "holy grail" of tool steel for woodturning. Unlike other types of high speed steel that sacrifice extreme edge retention for the ability to be honed to a keen edge, or vice versa, M42 offers both for optimum performance you can count on.
*Extreme edge retention
*Sharpens to a very keen edge
*Sharp and ready to use straight from the package
*Made in the USA
A negative rake scraper cutter reduces tear-out and improves controllability when making fine cuts.. The negative angle on the cutting edge also eliminates the tendency of the cutting edge to self-feed into the blank resulting in a catch. *Reduces tear-out *Non-aggressive cutting action *Improved controllability *Won’t self-feed *Provides a smooth clean cut on high figured areas *Carbide construction for long cutter life *Mounting screw included
These tools provide the mass and rigidity to dampen vibration and produce a clean finish. The heavy 3/8" cross section and 1-1/2" width allow you to reach further over the tool rest while producing a smooth finish on all types of wood complements of the negative rake cutting edge. Supplied with a heavy duty 17" Ash handle. 27" overall length. *Blade: 3/8" thick, 1-1/2" wide x 6-1/2" long *M2 High-speed steel *Premium ash handle *Solid brass ferrule Crafted in Sheffield, England for more than 150 years, Henry Taylor® M2 high-speed woodturning tools combine traditional forging techniques with state-of-the-art hardening and finishing processes to bring you the finest woodturning tools in the world. Henry Taylor® premium M2 high-speed steel tools go through rigorous testing to ensure proper hardness and edge-holding ability before being branded with the trusted Henry Taylor trademark. All tools are backed by our 100% satisfaction guarantee.
These tools provide the mass and rigidity to dampen vibration and produce a clean finish. The heavy 3/8" cross section and 1-1/2" width allow you to reach further over the tool rest while producing a smooth finish on all types of wood complements of the negative rake cutting edge. Supplied with a heavy duty 15-1/2" Ash handle. 27" overall length. *Blade: 3/8" thick, 1-1/2" wide x 6-1/2" long *M2 High-speed steel *Premium ash handle *Solid brass ferrule Crafted in Sheffield, England for more than 150 years, Henry Taylor® M2 high-speed woodturning tools combine traditional forging techniques with state-of-the-art hardening and finishing processes to bring you the finest woodturning tools in the world. Henry Taylor® premium M2 high-speed steel tools go through rigorous testing to ensure proper hardness and edge-holding ability before being branded with the trusted Henry Taylor trademark. All tools are backed by our 100% satisfaction guarantee.
These tools provide the mass and rigidity to dampen vibration and produce a clean finish. The heavy 3/8" cross section and 1-1/2" width allow you to reach further over the tool rest while producing a smooth finish on all types of wood complements of the negative rake cutting edge. Supplied with a heavy duty 17" Ash handle. 27" overall length. *Blade: 3/8" thick, 1-1/2" wide x 6-1/2" long *M2 High-speed steel *Premium ash handle *Solid brass ferrule Crafted in Sheffield, England for more than 150 years, Henry Taylor® M2 high-speed woodturning tools combine traditional forging techniques with state-of-the-art hardening and finishing processes to bring you the finest woodturning tools in the world. Henry Taylor® premium M2 high-speed steel tools go through rigorous testing to ensure proper hardness and edge-holding ability before being branded with the trusted Henry Taylor trademark. All tools are backed by our 100% satisfaction guarantee.
A negative rake scraper cutter reduces tear-out and improves controllability when making fine cuts. The negative angle on the cutting edge also eliminates the tendency of the cutting edge to self-feed into the blank resulting in a catch. *Reduces tear-out *Non-aggressive cutting action *Improved controllability *Won’t self-feed *Provides a smooth clean cut on high figured areas *Carbide construction for long cutter life *Mounting screw included
These extra heavy round point scrapers feature a negative rake profile to reduce tear-out, eliminate the tendency to self-feed and improve controllability. The 3/8" thick cross-section eliminates vibration and chatter while inspiring confidence with it’s overall solid feel. Every scraper is made of M2 high-speed steel and has been hardened to 60-62 Rockwell for toughness and durability. *6" Blade *M2 High-speed steel *Premium ash handle *Solid brass ferrule Crafted in Sheffield, England for more than 150 years, Henry Taylor® M2 high-speed woodturning tools combine traditional forging techniques with state-of-the-art hardening and finishing processes to bring you the finest woodturning tools in the world. Henry Taylor® premium M2 high-speed steel tools go through rigorous testing to ensure proper hardness and edge-holding ability before being branded with the trusted Henry Taylor trademark. All tools are backed by our 100% satisfaction guarantee.
This extra heavy square point scraper features a negative rake profile to reduce tear-out, eliminate the tendency to self-feed and improve controllability. The 3/8" thick cross-section eliminates vibration and chatter while inspiring confidence with it’s overall solid feel. Every scraper is made of M2 high-speed steel and has been hardened to 60-62 Rockwell for toughness and durability. *6" Blade *M2 High-speed steel *Premium ash handle *Solid brass ferrule Crafted in Sheffield, England for more than 150 years, Henry Taylor® M2 high-speed woodturning tools combine traditional forging techniques with state-of-the-art hardening and finishing processes to bring you the finest woodturning tools in the world. Henry Taylor® premium M2 high-speed steel tools go through rigorous testing to ensure proper hardness and edge-holding ability before being branded with the trusted Henry Taylor trademark. All tools are backed by our 100% satisfaction guarantee.
A negative rake scraper cutter reduces tear-out and improves controllability when making fine cuts.. The negative angle on the cutting edge also eliminates the tendency of the cutting edge to self-feed into the blank resulting in a catch.
*Reduces tear-out
*Non-aggressive cutting action
*Improved controllability
*Won’t self-feed
*Provides a smooth clean cut on high figured areas
*Carbide construction for long cutter life
*Mounting screw included
A negative rake scraper cutter reduces tear-out and improves controllability when making fine cuts. The negative angle on the cutting edge also eliminates the tendency of the cutting edge to self-feed into the blank resulting in a catch.
*Reduces tear-out
*Non-aggressive cutting action
*Improved controllability
*Won’t self-feed
*Provides a smooth clean cut on high figured areas
*Carbide construction for long cutter life
*Mounting screw included
A negative rake scraper cutter reduces tear-out and improves controllability when making fine cuts. The negative angle on the cutting edge also eliminates the tendency of the cutting edge to self-feed into the blank resulting in a catch.
*Reduces tear-out
*Non-aggressive cutting action
*Improved controllability
*Won’t self-feed
*Provides a smooth clean cut on high figured areas
*Carbide construction for long cutter life
*Mounting screw included
A negative rake scraper cutter reduces tear-out and improves controllability when making fine cuts. The negative angle on the cutting edge also eliminates the tendency of the cutting edge to self-feed into the blank resulting in a catch.
*Reduces tear-out
*Non-aggressive cutting action
*Improved controllability
*Won’t self-feed
*Provides a smooth clean cut on high figured areas
*Carbide construction for long cutter life
*Mounting screw included
A negative rake scraper cutter reduces tear-out and improves controllability when making fine cuts. The negative angle on the cutting edge also eliminates the tendency of the cutting edge to self-feed into the blank resulting in a catch.
*Reduces tear-out
*Non-aggressive cutting action
*Improved controllability
*Won’t self-feed
*Provides a smooth clean cut on high figured areas
*Carbide construction for long cutter life
*Mounting screw included
Easy Wood Tools™ proprietary carbide cutters are razor-sharp for an exceptional finish. *Fits the second generation 1/8" Easy Parting Tool *Razor sharp cutting edge *Mounting screw and wrench included *Made in USA
The Hollow-Pro™ Negative Swivel Tip Cutter Assembly is designed for use with Hollow-Pro™ Hollowing Tools and is non-agressive, making it ideal for light finishing cuts and general cutting. *No. 2 Cutter: 5/16" dia. for use on softer materials where rapid stock removal is desired *Includes: swivel tip cutter holder, carbide cutter, and torx wrench
The Artisan Ring Scraper makes turning ring blanks easier and more precise thanks to its unique design. Made of M2 high speed steel, the Ring Scraper features a negative rake cutting edge on the end and side of the tool shank so you can make an accurate, non-aggressive cut for a precise fit. Not only will the Ring Scraper help you properly size the interior of the ring blank for fitting the core, you can also use it to shape the outside of the ring and true the sides for a perfect fit. To sharpen, simply hone cutting edge with honing stone to extend life of the tool.
Made by Henry Taylor Tools Ltd.
*Negative rake bevel on side and end for accurate sizing
*Non-aggressive cutting action
*Works on inside, outside and sides of ring when turning
*Makes sizing ring blanks easier
*Premium M2 High speed steel
*Genuine hand polished 10" Ash handle
*Made by Henry Taylor Tools Ltd.
Specifications:
Blade measures: 6" long x 1/2" wide x 1/4" thick
Overall length: 16"
Ideal for creating beautiful custom rings, these acrylic ring blanks are available in several striking color combinations.
*Approx. 1-1/2" x 1-1/2" x 1/2"
Note:
Be sure to use a negative rake scraper or carbide tipped tool to prevent dig-ins when turning acrylic.
The 1/8" Easy Parting Tool features a permanently mounted negative rake carbide cutter on a replaceable stainless steel blade for smooth, clean parting through all materials.
*14" Premium handle
*2-1/2" blade length
*1/8" Cut width
*Maximum part-off diameter = 5"
Includes
Pi160 negative rake carbide cutter blade and hex key
DOES NOT accept Pi1 cutter
The Veritas® Scraper Burnisher makes it possible to create a smooth edge hook on your scraper that is superior to the burr produced by bench grinders. With a burnished edge hook, you can make tissue-thin cuts that result in a super smooth finish even on end-grain. You can control the size of the hook by varying the pressure applied during burnishing. Clamps in bench vise or can be mounted on bench top. *Measures 4-1/2" long by 2-5/8" wide *Instructions included
Designed with box makers in mind, the Artisan® Box Scraper makes cutting a clean crisp corner and flat bottom in boxes fast and easy. *20 degree point for easy access when cutting corners *15 degree relief angle prevents tool interference *Makes cutting a flat bottom simple and easy *Premium M2 High speed steel *Solid Ash handle with heavy brass ferrule *Blade measures: 6-1/2" long x 3/4" wide x 3/8" thick *Overall length: 22" Artisan® woodturning tools provide an economical alternative to other more expensive high-speed steel tools without sacrificing quality or performance. Though not as highly polished as standard Henry Taylor tools, Artisan® tools are made of the same top quality heat-treated M2 high-speed steel and premium ash handles as standard Henry Taylor tools, but at a lower price.
The Hollow-Pro™ M4 Scraper Blade fits all Hollow-Pro™ Tools and features a 75 degree grind. *62-64 Rockwell hardness
Many woodturners consider Turners Choice acrylic project blanks to be the best you can buy due to their crisp vibrant colors, unique patterns and ease of turning.
These blanks are perfect for making duck and goose calls, predator calls, kitchenware handles, small boxes and more. And, with color choices to suit most everyone, these beautiful blanks are sure to add even more wow factor to your favorite projects.
As with most resins and plastics, we recommend using a scraping tool such as the Easy Pen Turner or a negative rake scraper when turning for a smooth, non-aggressive cut that will produce optimum results. Instructions included.
*Crisp, vibrant colors
*Very popular for galleries and craft shows
*Add more wow factor to your work
*Can be polished to a glass-like finish
*Blank size (approximate): 1-1/2" x 1-1/2" x 6"
Many woodturners consider Turners Choice acrylic bottle stopper blanks to be the best you can buy due to their crisp vibrant colors, unique patterns and ease of turning.
These blanks are perfect for making eye-catching bottle stoppers as well other small projects that you want to get noticed. With color choices to suit most everyone, these beautiful blanks are sure to add even more wow factor to your bottle stopper projects.
As with most resins and plastics, we recommend using a scraping tool such as the Easy Pen Turner or a negative rake scraper when turning for a smooth, non-aggressive cut that will produce optimum results. Instructions included.
*Choose from 5 colorful patterns
*Crisp, vibrant colors
*Very popular for galleries and craft shows
*Add more wow factor to your work
*Can be polished to a glass-like finish
*Blank size: 1-1/2" x 1-1/2" x 2"
Adding additional reach to your Hollow-Pro hollowing tools can be very useful. It makes reaching underneath the rim of the bowl along with other problematic areas more accessible to work.
Made from long-lasting M2 high-speed steel, the Extended Scraper Cutter makes controlled cutting easier as it doesn't tend to self-feed as with carbide cutters
*75° grind
*62-64 Rockwell hardness
The Robert Sorby® M2 HSS Curved Scraper features a curved end profile, which makes it excellent for creating, smoothing, and blending curved surfaces in bowls and spindle work. *6" Blade *3/4" Wide *M2 High-speed steel *Premium ash handle *Solid brass ferrule Robert Sorby® M2 high-speed steel turning tools have long been a popular line of woodturning tools. Still made in-house in Sheffield, England, their special attention to heat treating, material quality, and overall craftsmanship have made them one of the top choices in woodturning tools.
Ideal for tissue-thin clean up cuts to eliminate gouge irregularities in the lower half of a bowl. *6" Blade *1" Wide *M2 High-speed steel *Premium ash handle *Solid brass ferrule Crafted in Sheffield, England for more than 150 years, Henry Taylor® M2 high-speed woodturning tools combine traditional forging techniques with state-of-the-art hardening and finishing processes to bring you the finest woodturning tools in the world. Henry Taylor® premium M2 high-speed steel tools go through rigorous testing to ensure proper hardness and edge-holding ability before being branded with the trusted Henry Taylor trademark. All tools are backed by our 100% satisfaction guarantee.
The Robert Sorby® M2 HSS Round/Side Cut Scraper features a special cutting profile that makes it ideal for cutting the parallel side walls of end grain boxes. The small radius on the point at the bottom of the cutting section creates a smooth transition between the side wall and flat-bottomed vessels. *6" Blade *3/4" Wide *M2 High-speed steel *Premium ash handle *Solid brass ferrule Robert Sorby® M2 high-speed steel turning tools have long been a popular line of woodturning tools. Still made in-house in Sheffield, England, their special attention to heat treating, material quality, and overall craftsmanship have made them one of the top choices in woodturning tools.
The Robert Sorby® M2 HSS Square Point Scraper allows you to easily create flat surfaces on spindles and the inside of boxes and bowls. *6" Blade *M2 High-speed steel *Premium ash handle *Solid brass ferrule Robert Sorby® M2 high-speed steel turning tools have long been a popular line of woodturning tools. Still made in-house in Sheffield, England, their special attention to heat treating, material quality, and overall craftsmanship have made them one of the top choices in woodturning tools.
The Robert Sorby® M2 HSS Round Point Scraper is designed for making light shaping and clean-up cuts to remove imperfections left by gouges and other tools. *6" Blade *M2 High-speed steel *Premium ash handle *Solid brass ferrule Robert Sorby® M2 high-speed steel turning tools have long been a popular line of woodturning tools. Still made in-house in Sheffield, England, their special attention to heat treating, material quality, and overall craftsmanship have made them one of the top choices in woodturning tools.
Robert Sorby® Universal Micro Round Nose Scraper:
*Ideal for making finishing cuts inside small bowls and boxes
*M2 High-speed steel
*5/16" Shaft
*Robert Sorby® Universal Micro Tool Handle required for use
Robert Sorby® Universal Micro Tool Blades are specifically designed to help woodturners meet the challenges of turning small projects where traditional tools won’t do.
Engineered from durable high-speed steel, Robert Sorby® Micro Turning Tools are ideal for pen turning, small spindle work and other delicate projects. Simply choose the blades you need, add the interchangeable aluminum handle and you have a customized, micro turning tool set. All blades have a 5/16" shaft.
Robert Sorby® Universal Micro French Curve Scraper:
*A good choice for smoothing and blending curved surfaces on small boxes and bowls
*M2 High-speed steel
*5/16" Shaft
*Robert Sorby® Universal Micro Tool Handle required for use
Robert Sorby® Universal Micro Tool Blades are specifically designed to help woodturners meet the challenges of turning small projects where traditional tools won’t do.
Engineered from durable high-speed steel, Robert Sorby® Micro Turning Tools are ideal for pen turning, small spindle work and other delicate projects. Simply choose the blades you need, add the interchangeable aluminum handle and you have a customized, micro turning tool set. All blades have a 5/16" shaft.
Available exclusively from Craft Supplies USA, the Carter and Son Toolworks Radius Scraper features an asymmetric round nose that is highly effective for improving the internal surfaces of bowls and platters. It is equally effective on end grain projects like boxes, goblets, and scoops.
Its heavy 3/8" thick cross section and 3/4" dia. tang dampens vibration and provides stability while the premium M42 high speed steel provides unparalleled edge holding ability.
*Includes Carter & Son aluminum handle
*Perfect for final shaping on bowls and platters
*Easy to control when making light cuts
*Profile works on most shapes and contours
*Heavy blade cross section eliminates vibration
Specifications:
Blade: 6-1/2" x 1" x 3/8"
Tang: 3/4" dia. x 2-3/4" long
Handle size: 16"
M42 high speed steel is considered by many top turners to be the "holy grail" of tool steel for woodturning. Unlike other types of high speed steel that sacrifice extreme edge retention for the ability to be honed to a keen edge, or vice versa, M42 offers both for optimum performance you can count on.
*Extreme edge retention
*Sharpens to a very keen edge
*Made in the USA
This tool features a long, spear-shaped profile that’s perfect for bi-directional shear scraping as well as cutting detail lines and shapes on bowls and platters. Tool measures 1" wide by 3/8" thick with over 5" of useable blade.
Made in USA. Sold unhandled.
Note: To maintain the grind profile on Mahoney tools, we recommend using the Oneway Sharpening System with Vari-Grind Jig.
*M42 ‘super steel’ for superb wear resistance
*Milled from 1" dia. M42 bar stock
*Hones to a razor sharp edge
*Sharp, ready to use out of the box
*Sold Unhandled
*Lifetime Guarantee
Specifications:
Overall length: 9-1/2"
Blade width: 1"
Useable blade length: 5"
Tang diameter: 3/4"
The new Mahoney range of M42 tools are the result of Mike's constant effort to improve efficiency and reduce production time. Every Mahoney tool is designed to help you produce maximum results in a minimal amount of time.
Manufactured to Mike's exact specifications by Carter and Son's Toolworks, each tool is identical to those used by Mike in his workshop.
Replace a worn or damaged cutter on your Robert Sorby® Multi-Tip Hollowing Tool with a Robert Sorby® M2 HSS Replacement Round Shear Scraper Blade.
The Robert Sorby® M2 HSS Round Side Cutting Scraper is useful in making the transition from the bottom to the side of the inside of boxes, lids, etc. *6" Blade *3/4" Wide *M2 High-speed steel *Premium ash handle *Solid brass ferrule Robert Sorby® M2 high-speed steel turning tools have long been a popular line of woodturning tools. Still made in-house in Sheffield, England, their special attention to heat treating, material quality, and overall craftsmanship have made them one of the top choices in woodturning tools.
The Crown® Pro-PM Round Point Scraper features a round profile that makes it ideal for general purpose scraping and for smoothing rough areas on spindles and bowls. *6-1/2" Blade *3/4" Wide *Powdered metallurgy *Premium wood handle Crown® Pro-PM tools feature advanced powdered metallurgy technology that's combined with traditional English craftsmanship resulting in top quality tools that hold an edge up to three times longer than M2 high-speed steel tools.
The Crown® Pro-PM Square Point Scraper is a must for woodturning and is designed for making light shaping and clean-up cuts to remove imperfections left by gouges and other tools. *6-1/2" Blade *3/4" Wide *Powdered metallurgy *Premium wood handle Crown® Pro-PM tools feature advanced powdered metallurgy technology that's combined with traditional English craftsmanship resulting in top quality tools that hold an edge up to three times longer than M2 high-speed steel tools.
The Henry Taylor® M2 HSS Radius Edge Shear Scraper features a radius point that provides versatility as the shearing cut can be made either way, depending on grain direction. *6-1/2" Blade *M2 High-speed steel *Premium ash handle *Solid brass ferrule Crafted in Sheffield, England for more than 150 years, Henry Taylor® M2 high-speed woodturning tools combine traditional forging techniques with state-of-the-art hardening and finishing processes to bring you the finest woodturning tools in the world. Henry Taylor® premium M2 high-speed steel tools go through rigorous testing to ensure proper hardness and edge-holding ability before being branded with the trusted Henry Taylor trademark. All tools are backed by our 100% satisfaction guarantee.
Replace a worn or damaged cutter on your Robert Sorby® Multi-Tip Hollowing Tool with a Robert Sorby® M2 HSS Replacement Tear Drop Shear Scraper Blade.
Available exclusively from Craft Supplies USA, the Carter and Son Toolworks Radius Scraper features an asymmetric round nose that is highly effective for improving the internal surfaces of bowls and platters. It is equally effective on end grain projects like boxes, goblets, and scoops.
Its heavy 3/8" thick cross section and 3/4" dia. tang dampens vibration and provides stability while the premium M42 high speed steel provides unparalleled edge holding ability.
*Perfect for final shaping on bowls and platters
*Easy to control when making light cuts
*Profile works on most shapes and contours
*Heavy blade cross section eliminates vibration
*Sold Unhandled
Specifications:
Blade: 6-1/2" x 1" x 3/8"
Tang: 3/4" dia. x 2-3/4" long
M42 high speed steel is considered by many top turners to be the "holy grail" of tool steel for woodturning. Unlike other types of high speed steel that sacrifice extreme edge retention for the ability to be honed to a keen edge, or vice versa, M42 offers both for optimum performance you can count on.
*Extreme edge retention
*Sharpens to a very keen edge
*Sharp and ready to use straight from the package
*Made in the USA
The Shear Shaper bowl gouge is designed for use as a delicate refining tool. It can be used with the bevel rubbing or edge contact only in a shear scraping motion to remove small undulations and surface imperfections. Identical to the one used in Mike's workshop, it's milled from 5/8" diameter M42 bar stock. Supplied with a double bevel, swept-back grind and is sharp, ready for use.
Made in USA. Sold unhandled.
Note: To maintain the grind profile on Mahoney tools, we recommend using the Oneway Sharpening System with Vari-Grind Jig.
*M42 ‘super steel’ for superb wear resistance
*Designed for delicate refining cuts
*Milled from 5/8" dia. M42 bar stock
*Parabolic flute profile for superb chip clearing
*Hones to a razor sharp edge
*Sharp, ready to use out of the box
*Sold Unhandled
*Lifetime Guarantee
Specifications:
Overall length: 13"
Blade diameter: 5/8"
Useable flute length: 4"
Cutting bevel angle: 35 degree
Secondary bevel angle: 30 degree
The new Mahoney range of M42 tools are the result of Mike's constant effort to improve efficiency and reduce production time. Every Mahoney tool is designed to help you produce maximum results in a minimal amount of time.
Manufactured to Mike's exact specifications by Carter and Son's Toolworks, each tool is identical to those used by Mike in his workshop.
This 3/4" round point scraper is ideal for smoothing rough areas in general, including the bottom of bowls and boxes where a gouge won't reach or cut properly.
*6-1/2" blade
Crown M42 Razor Edge tools are possibly the best M42 tools available at any price. Triple-temper heat treatment combined with cryogenic freezing gives them superior edge holding ability. Every Crown M42 Razor Edge tool comes with a beautiful black Ash handle with polished copper ferrule.
Looking for negative rake scraper? You're at the right place! Craft Supplies USA has been the leader in woodturning tool, equipment and supplies since 1982. In addition to the negative rake scraper you’re looking for, we also offer a wide range of woodturning finishes, sanding supplies, project kits, pen kits, turning blanks and much, much more. We also offer Woodturning Workshops for beginner, intermediate and advanced woodturners that are the experience of a lifetime.
It is our goal to offer the lowest priced negative rake scraper that meets our high quality standards. At Craft Supplies USA you'll only find products we enjoy using in our own shops all backed by our 100% satisfaction guarantee.
Customer service is our top priority! Our friendly, knowledgeable staff is eager to assist you with all your woodturning needs. If you have any questions about negative rake scraper, please click the Live Chat button at the top of this page.