An excellent, useful project that combines woodworking and woodturning, this kit features a 10-1/2" long serrated knife blade that slices bread without smashing it. *Super sharp serrated knife blade *Designed by professional woodturner and instructor Joe Herrmann *Made in USA Specifications: Finished size: 1-3/8" x 17-1/4" Blade measures: 3/8" x 10-1/2" Minimum blank size: (1) 9/16" x 1-9/16" x 19" and (2) 9/16" x 1-9/16" x 5-1/2"
Includes: Instructions 2 Figured Maple handle blanks Walnut bow blank Carbon steel serrated knife blade Fastening screws
Replacement items: Components (if available): Call (800) 551-8876

Developed by professional woodturner and instructor Joe Herrmann, this bread knife kit is an excellent project that incorporates woodworking and woodturning to produce a functional item that will be enjoyed by everyone. *Blade measures 3/8" wide and 10 1/2" long.

Expertly crafted from high-polished stainless steel, Artisan® Cheese Knives are the perfect gift for cheese lovers. With custom-turned handles, these beautiful knives are sure to impress and make an elegant gift for any occasion. Each stainless steel knife has a specific purpose. *Curved spreader for soft cheeses *Semi-Heart blade for hard cheeses *Wide blade for semihard cheeses *Thin blade for semisoft cheeses *Fork for serving cheese Specifications: Minimum blank size: 2" x 2" x 3-1/2"
Includes: Instructions Cheese knife (blank not included) Stainless steel ferrule Decorative handle brad
Items needed to complete: Drill bit: 7mm
Replacement items: Components (if available): (800) 551-8876

Large Knife Holder designed for use with the Pro Edge™ Knife Sharpening Jig to accommodate blades over 8".

The Artisan® Steak Knife is made of forged stainless steel that’s polished to a fine luster and ready for fitting to a custom handle. The Steak Knife has serrations along 2/3rds of the knife edge for cutting meats and other fibrous foods. The Artisan® Steak Knife along with our entire range of Artisan® tableware is designed to provide you with many years of dependable service at an exceptional price. Instructions included. Sold unhandled.
*Hand forged by experienced craftsman *Hand polished to fine luster *Serrated cutting edge *Stainless steel resists staining *Solid one-piece bolster design Specifications - (sizes are approximate) Length (without tang): 6-1/4" Tang size: 3/16" x 1-1/2" Recommended blank size: 1" x 1" x 6"
Includes: Instructions Project components (blank not included)

The Artisan® Dinner Knife is made of forged stainless steel that’s polished to a fine luster and ready for fitting to a custom handle. The Dinner Knife, along with our entire range of Artisan® Tableware is designed to provide you with many years of dependable service at an exceptional price. Instructions included. Sold unhandled.
*Hand forged by experienced craftsman *Hand polished to fine luster *Stainless steel resists staining *Solid one-piece bolster design Specifications - (sizes are approximate) Length (without tang): 5-1/2" Tang size: 3/16" x 1-1/2" Recommended blank size: 1" x 1" x 6"
Includes: Instructions Project components (blank not included)

The Artisan® Carving Knife is made of forged stainless steel that’s polished to a fine luster and ready for fitting to a custom handle. The Artisan® Carving Knife along with our entire range of Artisan® tableware is designed to provide you with many years of dependable service at an exceptional price. Instructions included. Sold unhandled.
*Hand forged by experienced craftsman *Hand polished to fine luster *Non-serrated cutting edge *Stainless steel resists staining *Solid one-piece bolster design Specifications - (sizes are approximate) Length (without tang): 7" Tang size: 3/16" x 1-5/8" Recommended blank size: 1" x 1" x 6"
Includes: Instructions Project components (blank not included)

The Artisan® Bread Knife is made of forged stainless steel that’s polished to a fine luster and ready for fitting to a custom handle. The Artisan® Bread Knife along with our entire range of Artisan® tableware is designed to provide you with many years of dependable service at an exceptional price. Instructions included. Sold unhandled.
*Serrated cutting edge *Hand forged by experienced craftsman *Hand polished to fine luster *Stainless steel resists staining *Solid one-piece bolster design Specifications - (sizes are approximate) Length (without tang): 9-1/4" Tang size: 3/16" x 1-1/2" Recommended blank size: 1" x 1" x 6"
Includes: Instructions Project components (blank not included)

Foredom® 2" Felt Wheels are made of a tightly compressed, top quality wool felt and are ideal for polishing wood, acrylic, and metal. *High quality wool felt *Ideal for polishing wood, acrylic, and metal *Holds an edge for working in angles and corners *Use with polishing compounds
Available profiles: Square Edge or Knife Edge

Few things are as enjoyable to use a handcrafted cutlery at the table. Our entire range of Turners Select™ stainless steel cutlery is produced by highly skilled craftsmen for a superb fit and finish you’ll enjoy for years to come. *Solid stainless steel construction *Precision ground and hand polished *Stainless steel bolster *Economically priced *Easy to make *Very popular for gift giving Specifications: Dimensions (small): 5/8" x 3" (not including tang) Dimensions (large): 5/8" x 5-3/16" (not including tang) Minimum blank size: 1-1/2" x 1-1/2" x 6"
Includes: Instructions Project components (blank not included)
Items needed to complete: Drill bit: 7mm
Replacement items: Components (if available): (800) 551-8876

Few things are as enjoyable to use a handcrafted cutlery at the table. Our entire range of Turners Select™ stainless steel cutlery is produced by highly skilled craftsmen for a superb fit and finish you’ll enjoy for years to come. *Solid stainless steel construction *Precision ground and hand polished *Stainless steel bolster *Economically priced *Easy to make *Very popular for gift giving Specifications: Dimensions: 5/8" x 2-3/4" (not including tang) Minimum blank size: 1-1/2" x 1-1/2" x 6"
Includes: Instructions Project components (blank not included)
Items needed to complete: Drill bit: 7mm
Replacement items: Components (if available): (800) 551-8876

Few things are as enjoyable to use a handcrafted cutlery at the table. Our entire range of Turners Select™ stainless steel cutlery is produced by highly skilled craftsmen for a superb fit and finish you’ll enjoy for years to come. *Solid stainless steel construction *Precision ground and hand polished *Stainless steel bolster *Economically priced *Easy to make *Very popular for gift giving Specifications: Dimensions: 3/4" x 4-3/8" (not including tang) Minimum blank size: 1-1/2" x 1-1/2" x 6"
Includes: Instructions Project components (blank not included)
Items needed to complete: Drill bit: 7mm
Replacement items: Components (if available): (800) 551-8876

Few things are as enjoyable to use a handcrafted cutlery at the table. Our entire range of Turners Select™ stainless steel cutlery is produced by highly skilled craftsmen for a superb fit and finish you’ll enjoy for years to come. *Solid stainless steel construction *Precision ground and hand polished *Stainless steel bolster *Economically priced *Easy to make *Very popular for gift giving Specifications: Dimensions: 2" x 5-1/2" (not including tang) Minimum blank size: 1-1/2" x 1-1/2" x 6"
Includes: Instructions Project components (blank not included)
Items needed to complete: Drill bit: 7mm
Replacement items: Components (if available): (800) 551-8876

In only seconds, you can produce a razor sharp edge on carving, hunting, kitchen knives and more with the Robert Sorby® Pro Edge™ Knife Sharpening Jig. The Knife Sharpening Jig is fully adjustable to accommodate varying blade thicknesses and allows you to easily produce any bevel angle you require. *Clamping screws adjust to securely hold various blade thicknesses *Adjustable collar allows for numerous sharpening angles from steep to shallow *Universal arm design accepts the Large Knife Holder to accommodate blades over 8" *Includes: small knife holder for blades up to 8" long, universal arm, mounting hardware and instructions *Ideal for use with Pro Edge™ Trizact Belts

The Artisan® Compact Key Ring Knife is sure to be popular with those who don't like to carry large, cumbersome key rings and still have a quality 2" knife blade handy. *2" Serrated stainless steel blade stores safely inside when not in use *10k Gold plating Specifications: Finished size: Closed - 5/8" x 2-3/4" Open - 5/8" x 4-3/4" Minimum blank size: 3/4" x 3/4" x 2-1/8"
Includes: Instructions Project components (blank not included)
Items needed to complete: Drill bit: 31/64" Bushings: Artisan® Compact Key Ring Knife Bushings 7mm Pen mandrel Barrel trimmer head Pilot shaft: 31/64" (requires Apprentice® Barrel Trimmer Adapter Blank)
Replacement items: Brass tube: Artisan® Key Ring Knife Tube Components (if available): Call (800) 551-8876

Easily core bowls from 6" to 18" in diameter and up to 7-1/2" deep without chatter, dig-ins, or stalling the lathe with the Oneway® Easy Core™ System. This solid and precise bowl coring system features exceptional design and heavy duty construction that are guaranteed to perform to your expectations. Select an Easy Core™ Knife Set to suit your needs and pair it with an Easy Core™ Base Unit (sold separately). *Easily core bowls without chatter, dig-ins, or stalling the lathe *Solid and precise bowl coring system *Heavy duty steel knife can be adjusted to provide a range of core sizes *M4 High speed steel cutter tip with negative grind requires pressure to cut *Cutter design eliminates dig-ins and tendency to self-feed *Versatile knife position determines diameter and depth of core *Requires Oneway® Easy Core™ Base Unit for use *Includes: knife blade, support finger, and cutter tip
Knife Coring Specifications: *No. 1: Depth 3-7/8"; Size 9-1/2" to 11-1/2" dia. *No. 2: Depth 5"; Size 12" to 14" dia. *No. 3: Depth 6-1/4"; Size 14-1/2" to 16-1/2" dia. *No. 4: Depth 7-1/2"; Size 16-3/4" to 18" dia.

The Artisan® Cake Knife is made of forged stainless steel that’s polished to a fine luster and ready for fitting to a custom handle. The Cake Knife along with our entire range of Artisan® Tableware is designed to provide you with many years of dependable service at an exceptional price. Instructions included. Sold unhandled. *Hand forged by experienced craftsman *Hand polished to fine luster *Stainless steel resists staining *Solid one-piece bolster design
Specifications - (sizes are approximate) Length (without tang): 8 1/2" Tang size: 3/16" x 1-1/4" Recommended blank size: 1" x 1" x 6"
Includes: Instructions Project components (blank not included)

Save 10% on the bushings and drill bit(s) you need when you buy them together in the Artisan® Compact Key Ring Knife Turning Kit.
*Precision machined steel bushings for accuracy *Fuller HSS Brad Point Drill Bits last 10 times longer than carbon steel *Bushings to be used ONLY with the Artisan® Compact Key Ring Knife Kit Includes: Bushings 31/64" Fuller HSS Brad Point Drill Bit

Set of bushings for the Artisan® Compact Key Ring Knife Kit.
Bushings are a gauge indicating the recommended final diameter of the finished pen or project blanks. To use, simply mount the blanks between the bushings (following the kit instructions) onto a 7mm pen mandrel. Turn the blanks down to match the bushing diameter, leaving a little extra material for final sanding and finishing.
*Precision machined steel for accuracy *Fits 7mm pen mandrels *For use ONLY with the Artisan® Compact Key Ring Knife Kit

Even the most experienced turners have mishaps when turning. That's why we offer brass replacement tubes for every kit we sell.

Replace the worn out cutter on your Oneway® Easy Core™ Knife with a Oneway® Easy Core™ System Replacement M4 HSS Cutter Tip.

Easily core bowls from 6" to 18" in diameter and up to 7-1/2" deep without chatter, dig-ins, or stalling the lathe with the Oneway® Easy Core™ System. This solid and precise bowl coring system features exceptional design and heavy duty construction that are guaranteed to perform to your expectations. Select the appropriate base unit clamp block size to fit your lathe and pair it with an Easy Core™ Knife Set to suit your needs (sold separately). *Easily core bowls without chatter, dig-ins, or stalling the lathe *Solid and precise bowl coring system *Heavy duty steel construction *Bases available for lathes from 16" to 24" capacity *Requires Oneway® Easy Core™Knife Set for use *Includes: steel base plate, knife and finger support posts, and handle
To determine size (lathe capacity): measure the distance from the bed to the center of the lathe spindle and multiply by 2 to determine correct Base Unit size.
To determine Bed Gap: measure the distance between the rails on your lathe bed.

Easily core bowls from 6" to 18" in diameter and up to 7-1/2" deep without chatter, dig-ins, or stalling the lathe with the Oneway® Easy Core™ System. This solid and precise bowl coring system features exceptional design and heavy duty construction that are guaranteed to perform to your expectations. Select the appropriate base unit clamp block size to fit your lathe and pair it with an Easy Core™ Knife Set to suit your needs (sold separately).
*Easily core bowls without chatter, dig-ins, or stalling the lathe *Solid and precise bowl coring system *Heavy duty steel construction *Bases available for lathes from 16" to 24" capacity Includes: Steel base plate Knife and finger support posts Handle
Note: Requires Oneway® Easy Core™ knife set for use (sold separately)
To determine size (lathe capacity): Measure the distance from the bed to the center of the lathe spindle and multiply by 2 to determine correct Base Unit size.
To determine Bed Gap: Measure the distance between the rails on your lathe bed.

Easily core bowls from 6" to 18" in diameter and up to 7-1/2" deep without chatter, dig-ins, or stalling the lathe with the Oneway® Easy Core™ System. This solid and precise bowl coring system features exceptional design and heavy duty construction that are guaranteed to perform to your expectations. Select the appropriate base unit clamp block size to fit your lathe and pair it with an Easy Core™ Knife Set to suit your needs (sold separately).
*Easily core bowls without chatter, dig-ins, or stalling the lathe *Solid and precise bowl coring system *Heavy duty steel construction *Bases available for lathes from 16" to 24" capacity Includes: Steel base plate Knife and finger support posts Handle
Note: Requires Oneway® Easy Core™ knife set for use (sold separately)
To determine size (lathe capacity): Measure the distance from the bed to the center of the lathe spindle and multiply by 2 to determine correct Base Unit size.
To determine Bed Gap: Measure the distance between the rails on your lathe bed.

Easily core bowls from 6" to 18" in diameter and up to 7-1/2" deep without chatter, dig-ins, or stalling the lathe with the Oneway® Easy Core™ System. This solid and precise bowl coring system features exceptional design and heavy duty construction that are guaranteed to perform to your expectations. Select the appropriate base unit clamp block size to fit your lathe and pair it with an Easy Core™ Knife Set to suit your needs (sold separately). *Easily core bowls without chatter, dig-ins, or stalling the lathe *Solid and precise bowl coring system *Heavy duty steel construction *Bases available for lathes from 16" to 24" capacity *Requires Oneway® Easy Core™Knife Set for use *Includes: steel base plate, knife and finger support posts, and handle
To determine size (lathe capacity): measure the distance from the bed to the center of the lathe spindle and multiply by 2 to determine correct Base Unit size.
To determine Bed Gap: measure the distance between the rails on your lathe bed.

The JET ProShop Table Saw offers features you expect from a high-end cabinet saw, in the compact design of a contactor-style machine. The transparent blade guard has independent leaves, and the quick release riving knife reduces chance of kickback. A low profile riving knife is included for non-through cuts. The exclusive ProShop fence system is available in 30" or 52" rip capacity.
*Riving knife maintains close blade proximity to reduce chance of kickback *Integrated arbor lock is accessed from table top for rapid blade change *Blade guard and riving knife have quick release for tool-less mounting and removal *Enclosed cabinet with exclusive leg stand design for easy assembly *Heavy duty cast iron table with T-style miter gauge slot *Sloped cabinet floor and 4" extraction port enhance dust collection efficiency *Easy-to-reach control switch *Rigid, left-tilting cast iron trunnion *Powder coated paint for a long-lasting, chip-resistant finish *10" blade included Specifications: Style: Contractor Blade Diameter: 10" Arbor Diameter: 5/8" Arbor Speed: 4000 RPM Maximum Depth of Cut: 3-1/8" Maximum Depth of Cut at 45 Degrees: 2-1/8" Maximum Rip Left of Blade: 12" Maximum Rip Right of Blade: 52" Table in Front of Saw Blade at Maximum Depth of Cut: 10" Maximum Diameter of Dado: 8" Maximum Width of Dado: 13/16" Table Type: Cast Iron Table Size with Extension: 27" x 44" Miter Gauge Type: T-Slot with Stops Dust Collection Minimum CFM Required: 350 CFM Dust Port Outside Diameter: 4" Motor Power: 1-3/4 HP Motor Voltage: 115/230 Prewired Voltage: 115 Motor Amps: 15/7
JET stock number 725001K

The JET ProShop Table Saw offers features you expect from a high-end cabinet saw, in the compact design of a contactor-style machine. The transparent blade guard has independent leaves, and the quick release riving knife reduces chance of kickback. A low profile riving knife is included for non-through cuts. The exclusive ProShop fence system is available in 30" or 52" rip capacity.
*Riving knife maintains close blade proximity to reduce chance of kickback *Integrated arbor lock is accessed from table top for rapid blade change *Blade guard and riving knife have quick release for tool-less mounting and removal *Enclosed cabinet with exclusive leg stand design for easy assembly *Heavy duty cast iron table with T-style miter gauge slot *Sloped cabinet floor and 4" extraction port enhance dust collection efficiency *Easy-to-reach control switch *Rigid, left-tilting cast iron trunnion *Powder coated paint for a long-lasting, chip-resistant finish *10" blade included Specifications: Style: Contractor Blade Diameter: 10" Arbor Diameter: 5/8" Arbor Speed: 4000 RPM Maximum Depth of Cut: 3-1/8" Maximum Depth of Cut at 45 Degrees: 2-1/8" Maximum Rip Left of Blade: 12" Maximum Rip Right of Blade: 30" Table in Front of Saw Blade at Maximum Depth of Cut: 10" Maximum Diameter of Dado: 8" Maximum Width of Dado: 13/16" Table Type: Cast Iron Table Size with Extension: 27" x 44" Miter Gauge Type: T-Slot with Stops Dust Collection Minimum CFM Required: 350 CFM Dust Port Outside Diameter: 4" Motor Power: 1-3/4 HP Motor Voltage: 115/230 Prewired Voltage: 115 Motor Amps: 15/7
JET stock number 725000K

The Easy-Core bowl coring system eliminates the fear and anxiety associated with coring bowls and it’s our personal favorite among all coring systems. It’s perfect for most woodturners as it doesn’t require special skills, and it’s easy to set up and operate.
Because the coring system anchors to the lathe bed and the coring unit and lathe carry the load while coring, you can core bowls to your hearts content with confidence and very little effort on your part.
The 10" Easy-Core system is designed for the Oneway 1018 (or comparably sized lathe with 1 HP motor) and is different than larger Easy Core units as it only uses one knife which is included with the system. By relocating the base on the lathe bed you can produce different sized bowl cores.
Includes *Complete Base Assembly *Coring Knife *HSS M4 Cutter Tip *Handle *Clamp Block (please specify when ordering) Features *Produce multiple bowls from a single blank *Core bowls without chatter or dig-ins *Heavy duty steel construction *Solid and precise bowl coring system *Long lasting HSS M4 replaceable cutters To determine Bed Gap: measure the distance between the rails on your lathe bed. This distance indicates the size of clamp block you’ll need to fit your lathe.
We highly recommend using the system with the tailstock advanced for support, which may require the use of a morse taper extension.

The Easy-Core bowl coring system eliminates the fear and anxiety associated with coring bowls and it’s our personal favorite among all coring systems. It’s perfect for most woodturners as it doesn’t require special skills, and it’s easy to set up and operate.
Because the coring system anchors to the lathe bed and the coring unit and lathe carry the load while coring, you can core bowls to your hearts content with confidence and very little effort on your part.
The 12" Easy-Core system is designed for the Oneway 1224 (or comparably sized lathes) and is different than larger Easy Core units as it only uses one knife which is included with the system. By relocating the base on the lathe bed you can produce different sized bowl cores.
Includes *12" Easy Core System includes: *Complete Base Assembly *Coring Knife *HSS M4 Cutter Tip *Handle *Clamp Block (please specify when ordering) Features *Produce multiple bowls from a single blank *Core bowls without chatter or dig-ins *Heavy duty steel construction *Solid and precise bowl coring system *Long lasting HSS M4 replaceable cutters To determine Bed Gap: measure the distance between the rails on your lathe bed. This distance indicates the size of clamp block you’ll need to fit your lathe.
We highly recommend using the system with the tailstock advanced for support, which may require the use of a morse taper extension.

If you enjoy functional woodenware, the Artisan® Cheese Plane is the perfect project. *Solid stainless steel with chrome bolster *Self-leveling blade Specifications: Dimensions: 2-3/4" x 5" Minimum blank size: 1-1/2" x 1-1/2" x 6"
Includes: Instructions Project components (blank not included)
Items needed to complete: Drill bit: 3/8"
Replacement items: Components (if available): Call (800) 551-8876

Create a one-of-a-kind cheeseboard that's sure to draw attention with a Turners Select™ Marble Cheesboard Tile. *Fun and functional project you'll enjoy turning *Marble keeps cheese cool *Ideal conversation piece for parties *Washes easily *Durable marble tile with radiused edge Specifications: Dimensions: Approx. 5-3/4" - 6" dia. x 3/8" thick Minimum blank size: 12" x 12" x 1-1/2"
Includes: Instructions Marble cheeseboard (blank not included)

Enjoy pizza night even more with a custom turned Artisan® Stainless Steel Pizza Cutter. *Professional grade, oversized 4" dia. cutter for smooth cutting *Inexpensive, practical gift they'll love *7/16" shank size Specifications: Dimensions: 4" dia. wheel Minimum blank size: 1-1/2" x 1-1/2" x 7"
Includes: Instructions Project components (blank not included)
Items needed to complete: Drill bit: 31/64"
Replacement items: Components (if available): Call (800) 551-8876

Practical enough for every day use and fun to make, our premium vegetable peeler kit makes a great gift for friends and family. The stainless steel blade is super sharp and can cut in either direction making it ideal for both left and right hand users. The hefty chrome plated frame securely attaches to your custom turned handle using a threaded shaft. This design allows you to disassemble the peeler for washing the blade and refinishing the handle.
*Sharp, stainless steel blade *Bi-directional action *Non-serrated cutting edge *Hefty chrome plated frame *Cuts fast and efficiently *Threaded shaft design for easy cleaning Specifications: Dimensions: 2-1/4" wide x 2-1/4" long Minimum blank size: 1-1/4" x 1-1/4" x 4"
Includes: Instructions Project components (blank not included)
Items needed to complete: Drill bit: 11/32" Drill tap: 3/8" x 16 TPI Mandrel: 3/4" (mini) Artisan® Bottle Stopper Mandrel Drill chuck: 1/2"

The multi-purpose Artisan® Stainless Steel Mini Fork can be used for serving hors d'oeuvres and cheese and are the ideal corn-cob holder. *Stainless steel resists corrosion *Dual barb point holds food securely in place *Trim shaft to length as needed Specifications: Dimensions: 3/32" x 3" Minimum blank size: 7/8" x 7/8" x 2"
Includes: Instructions 1 Mini fork (blank not included)
Items needed to complete: Drill bit: 3/32"
Sold Individually

The Artisan® Rasp Grater kit is a great woodturning project that’s fun to make and useful too! An indispensable kitchen tool for those who enjoy cooking, a top quality rasp grater has broad appeal to cooks of all levels and makes a great craft show item for resale.
Features of the Artisan® Rasp Grater Kit include a sturdy steel frame with a stainless steel blade, razor sharp teeth for maximum results with minimum effort and removable handle for cleaning. The rubber foot on the end of the grater prevents marking and helps hold it securely in place. A handy snap-on cover is included to protect the cutting surface from dulling and protect your hands too.
*Razor sharp stainless steel blade *Generous grating surface *Non-clogging teeth *Sturdy steel frame *Rubber foot prevents countertop marking *Threaded shaft for easy disassembly *Dishwasher safe *Protective snap-on cover included Suggest Uses *Grate Parmesan cheese light and fluffy *Zest citrus in seconds *Grate chocolate for baking and decorating *Purée garlic and ginger *Grate hard spices *Shred coconut for baking and decorating Specifications: Overall length: 11-1/4" Cutting length: 8" Width: 1-1/2" Bolster: 5/8" Threaded tang: 3/8"
Includes: Instructions Project components (blank not included)
Items needed to complete: Drill bit: 11/32" Drill tap: 3/8" x 16 TPI Mandrel: 3/4" (mini) Artisan® Bottle Stopper Mandrel Drill chuck: 1/2"

Turners Select™ Basting Brush Tufts feature food safe, genuine Chinese hog bristle that's long-lasting and can stand up to any basting task. *Food safe *Genuine Chinese hog bristle *5/8" tuft ideal for pastry brushes *3/4" tuft ideal for general basting purposes *7/8" tuft ideal for BBQ and large meat basting Specifications: Dimensions: Selected tuft dia. x 3" long
Includes: Instructions (1) Basting brush tuft

Pair a custom-turned base with one of these hand-blown Artisan® Premium Stemware Kits for an exquisite stemware piece that’s sure to impress. *Premium, clear hand-blown glass *Glass stem for easy fitting and alignment when gluing *Inexpensive, easy-to-make gift *Attach to wood with flexible silicone adhesive *Chardonnay Wine Glass holds 8 oz. *Champagne Flute holds 5 oz. *Bordeaux Wine Glass holds 10 oz. *Large Bordeax Wine Glass holds 20 oz. Specifications: Minimum blank size: 3" x 3" x 4"
Includes: Instructions Stemware (blank not included)
Items needed to complete: Drill bit: 7/16"

The Artisan® Classic Ice Cream Scoop features brightly polished stainless steel and classic styling you'll love along with the functionality of a threaded shaft insert, which makes it easy to remove from your custom turned handle when it's time for cleaning. *Brightly polished stainless steel for a classic look *Threaded shaft insert for simple and convenient assembly *Easy to clean, just twist the scoop off of the threaded insert *Fun and unique gift they'll love to use again and again Specifications: Dimensions (scoop): 1-11/16" wide x 3-3/16" long x approx. 1/2" deep Minimum blank size: 1-1/2" x 1-1/2" x 5-1/2"
Includes: Instructions Project components (blank not included)
Items needed to complete: Drill bit: 11/32" Drill tap: 3/8" x 16 TPI Drill chuck: 1/2" Mandrel: 3/4" (mini) Artisan® Bottle Stopper Mandrel
Replacement items: Componenets (if available): Call (800) 551-8876

Our popular pigtail food flipper is now available in 2 convenient sizes. The 12" flipper is perfect for the kitchen and smaller barbecue grills. The 18" size is ideal for serious cooking on large grills where you need a long reach.
Turning is easy and you can turn a handle that’s as simple or complicated as you like. No matter which material you use to make your pigtail food flipper, you’ll have a seriously handy kitchen tool that will make you wonder how you ever got by without it.
"A cooking tool with a silly name and a seriously functional form." -Fine Cooking Magazine
*Replaces tongs, forks and spatulas *Flips, moves and carries food *Won’t mark or bleed meats *Food safe stainless steel shaft *Perfect gift for friends and family *Great for selling at craft shows Specifications: Dimensions (12"): Tapered 1/4" dia. x 12" w/ 3/8" radius pigtail Dimensions (18"): Tapered 9/32" dia. x 18" w/ 3/4" radius pigtail Miniumum blank size: 3/4" x 3/4" x 3-1/2"
Items needed to complete: Drill bit (12"): 1/4" Drill bit (18"): 9/32"

Create a custom salt shaker with the Turners Select™ Rubber Bung. *For use with Turners Select™ Salt Shaker Cap *Fits 1" dia. hole Specifications: Dimensions: 1-3/16" dia. x 1/2" thick
Includes: (1) Rubber bung

Our Artisan® Premium Pizza Cutter kit is a great woodturning project that’s practical, easy to make and a joy to use. When you combine the super sharp 4" stainless steel cutting wheel and heavy cutter frame with your hand turned cutter handle, you’ll find cutting even the thickest crust easy with a minimal amount of effort.
Making an Artisan® Premium Pizza Cutter is simple. Drill and tap the end of the handle blank, turn and finish the handle between centers, thread the finished handle onto the threaded pizza cutter shaft and you’re ready to go. For washing or refinishing, just unscrew the handle and reattach when done.
*Large 4" stainless steel cutting wheel *Unique cutter frame design positions weight above the blade *Cuts faster with less effort *3 times heavier than regular pizza cutters *Threaded shaft for easy disassembly *Dishwasher safe (with handle removed) *100% Satisfaction guaranteed Specifications: Dimensions: 4" dia. wheel Minimum blank size: 1-1/2" x 1-1/2" x 6"
Includes: Instructions Project components (blank not included)
Items needed to complete: Drill bit: 11/32" Drill tap: 3/8" x 16 TPI Drill chuck: 1/2" Mandrel: 1" (Large) Artisan® Bottle Stopper Mandrel
Replacement items: Components (if available): Call (800) 551-8876

Create a beautiful custom turned wood cake stand or cheese platter with a Turners Select™ Glass Dome. *Create a beautiful custom turned serving stand *Heavy duty, durable, thick cast glass *11" Dome is ideal for cake stands and fits over an 11" dia. base *6" Dome is ideal for cheese platters and fits over a 6" dia. base *Made in USA Specifications: Dimensions: 6" dia. x 5" tall

Modern styling and quality construction make the Artisan® Pepper Shaker Kit perfectly suited for daily use and years of enjoyment. Beautifully machined and chrome plated for a perfect fit and finish, it’s guaranteed to compliment your best work and last for many years to come. You won’t find a comparable shaker kit anywhere at any price, guaranteed!
*6 hole cap design for pepper and 3 hole for salt *Modern styling with perfect fit and finish *Black ring on cap for easy identification of pepper *White ring on cap for easy identification of salt *Plastic interior liner protects against corrosion *Threaded cap for easy filling *O-ring seal holds cap firmly in place *Chrome plated for long term durability *Perfect for gift giving, selling at craft shows and galleries *Can be turned between tapered centers or using a pen mandrel Specifications: Finished size: 1-1/2" x 3" Minimum blank size: 1-3/4" x 2-3/4"
Includes: Instructions Project components (blank not included)
Items needed to complete: Drill bit: 1-1/4" forstner Premium Salt & Pepper Shaker Bushings
Replacement items: Components (if available): Call (800)551-8876

Artisan® Stainless Steel Serving Utensil Set are a fun yet practical project that will be enjoyed by friends and family. Made of stainless steel and polished to a soft sheen, these sturdy serving spoons feature a bolster for a clean fit and finish. *Stainless steel resists corrosion *Ideal for serving salads, side dishes and more *Inexpensive, easy-to-turn project they'll love Specifications: Dimensions: 2-3/8" x 5-3/8" Minimum blank size: (2) 1-1/2" x 1-1/2" x 7"
Includes: Instructions Project components (blanks not included)
Items needed to complete: Drill bit: 7mm
Replacement items: Components (if available): Call (800) 551-8876

The great looking Artisan® Premium Bottle Opener Kit is a must have for every kitchen. It comes with long lasting chrome plating and features our exclusive threaded shaft design that allows you to easily disassemble the handle for cleaning or refinishing. Instructions included. *Opens traditional bottle caps *Long lasting chrome plating *Thread on design makes cleaning and refinishing easy *Excellent fit and finish throughout *100% Satisfaction Guarantee Specifications: Dimensions: 1-1/4" wide x 2" long Minimum blank size: 1-1/4" x 1-1/4" x 3-1/2"
Includes: Instructions Project components (blank not included)
Items needed to complete: Drill bit: 11/32" Drill tap: 3/8" x 16 TPI Mandrel: 3/4" (mini) Artisan® Bottle Stopper Mandrel Drill chuck: 1/2"
Replacement items: Components (if available): Call (800) 551-8876

Turners Select™ Cork Coaster Inserts are ideal for making functional coaster sets. The tan brown color complements most woods, and the cork surface will absorb moisture from the surface of the glasses. *Simple, easy-to-turn *Inexpensive project that's ideal for gift giving *Natural cork absorbs moisture *Protects table tops from damage Specifications: Dimensions: 3-7/8" dia. x 1/4" thick

Add a touch of class to cutlery, mini forks, cheese planes and other small projects with a nickel plated Artisan® Decorative Handle Brad. No drilling required, just tap it into the end of the handle and you’re good to go. *Adds an expensive look without the cost *Easily taps into the bottom of any turned handle *3/8" diameter radiused head *Nickel plating matches stainless steel components and ferrules *Sold as pack of 4

The Artisan® Coffee Scoop kit is a great project for coffee lovers. It features a durable chrome-plated exterior, just the right amount of heft, and a threaded shaft design that allows you to disassemble the scoop for cleaning.
*One heaping scoop yields approximately one tablespoon *Flat bottom prevents scoop from tipping over *Threaded shaft design makes cleaning easy *Long wearing chrome plating *100% Satisfaction Guarantee Specifications: Dimensions (scoop): 1-3/16" tapered dia. x 1" deep x 2-1/8" long Minimum blank size: 3/4" x 3/4" x 5"
Includes: Instructions Project components (blank not included)
Items needed to complete: Drill bit: 11/32" Drill tap: 3/8" x 16 TPI Drill chuck: 1/2" Mandrel: 5/8" Artisan® Bottle Stopper Mandrel
Replacement items: Components (if available): Call (800) 551-8876

Create your own unique set of salt and pepper shakers with the Artisan® Salt & Pepper Shaker Set. *Chrome plated cap *Durable plastic body *Salt shaker cap has a single hole while the pepper shaker has three *Threaded cap design *The plastic body tapers from 1" dia. to 7/8" at the base Specifications: Dimensions: 1-1/8" dia. x 2-1/2" long Minimum blank size: (2) 1-1/2" x 1-1/2" x 2-1/2"
Includes: Instructions 2 plastic tubes (blanks not included) Salt and pepper shaker caps
Items needed to complete: Forstner bit: 1"
Replacement items: Components (if available): Call (800) 551-8876

Create a custom salt shaker with the Turners Select™ Salt Shaker Cap. *Stainless steel resists corrosion Specifications: Dimensions (large): 1-3/8" dia. Dimensions (small): 13/16" dia. Minimum blank size (large): 2" x desired length Minimum blank size (small): 1-1/2" x desired length
Items needed to complete: Forstner drill bit (large): 1-1/4" Forstner drill bit (small): 3/4"

The solid brass Artisan® Ships Wheel Nut Cracker Kit is attractive, functional and fun to use. *Solid brass *Fun holiday tradition *Easy-to-turn project Specifications: Dimensions: 3" dia. x 4" tall
Click to view our how-to video and article.

Using handcrafted woodenware in the kitchen provides a great deal of personal satisfaction. A turned cork trivet is no exception. Turned cork trivets look great, are easy to turn and protect your valuable counter tops and kitchen table from heat damage caused by hot pans. Instructions included. *Easy-to-turn project *Affordable woodturning gift ideal for giving or craft shows *Premium quality cork disperses heat quickly *Protect table tops, counter tops and more from scorching pots and pans Specifications: Dimensions (9"): 9" x 3/8" Minimum blank size (9"): 12" x 12 x 1-1/2"
Includes: Instructions Cork trivet (blank not included)
Read the how-to article