H1 Heading Not Displayed

Why is it that about the time your favorite tool reaches the perfect length, it's too short? Fact is, most tools are thrown out long before they are worn out. In addition, tools are easiest to use when the blade is just long enough to get the job done. Hosaluk™ Handle Inserts let you enjoy the look and feel of traditional wood handles while allowing you to adjust the blade length to suit your needs. This not only results in better tool control, it saves you money by not throwing away tools before they are worn out. The depth of the hole in the handle determines blade adjustability.

Designed with the discerning woodturner in mind, these Ash handles are custom made by Henry Taylor for Craft Supplies USA with a balance and finish that will enhance any tool. These handles require drilling to fit the tool.
Specifications 10" handle: 3/4" diameter 14" handle: 15/16" diameter 16" handle: 1-1/8" diameter

The Hosaluk™ Modular Tool Handle combines the benefits of vibration absorbing aluminum and industrial grade rubber to create a comfortable, well-balanced handle that improves your feel and tool control while significantly reducing hand fatigue. *Precision-machined aluminum ends reduce vibration by 50% or more over steel *Comfortable non-slip grip reduces fatigue *Double-ended to accept 1/2" and 5/8" diameter blades *Adapter available for 3/8" diameter blades *Vibration dampening reduces hand fatigue *Lifetime guarantee

Possibly the best modular handles available today, these premium Oneway® Mastercut Tool Handles offer comfort, versatility and performance you'd expect from Oneway®. *Handles are 1-3/16" dia. *Fully adjustable - set the tool blade in any position you choose *Vibration absorbing aluminum ends with dual set screws for positive grip *Double-ended design - 1/2" and 5/8" diameter hole in either end. *Tubular steel interior for strength and rigidity *Comfortable rubber exterior with tactile surface *Adapter sleeves available for 3/8" tools

Oneway® Mastercut Tool Handle Adapter Sleeves are used to adapt various size of tools to fit your Oneway® Mastercut Tool Handle.

The extra heavy duty Turners Select™ Brass Tool Handle Ferrule is perfect for making custom tool handles able to hold up under the most demanding situations. Ferrules can be sanded and polished to a high sheen. *3/4" long *Sold individually

The 18" Hosaluk Steel Handle is highly recommended by Mike Jackofsky for use with his Hollow-Pro and Rocket hollowing tools. Ideally suited for roughing and hollowing where maximum vibration reduction is desired, this handle offers a double ended design that accepts 1/2" and 5/8" diameter blades.
*Vinyl covered for comfortable grip *Dual set screws keep tool securely in place *Double-ended design accepts 1/2" and 5/8" dia. blades *Highly recommended for use with Jackofsky hollowing tools

The premium Bosch™ 20" Super Handle offers many features not found on other interchangeable tool handles, making it ideal for wide variety of turning tools and applications. *Fill with sand or lead shot to dampen vibration *Super strong 6061 aluminum construction *Comfortable grip *Color-coded for easy tool identification *Adapter bushings easily adapt to various tool shafts *Fits 5/8" dia. tools

The premium Bosch™ 24" Super Handle offers many features not found on other interchangeable tool handles, making it ideal for wide variety of turning tools and applications. *Fill with sand or lead shot to dampen vibration *Super strong 6061 aluminum construction *Comfortable grip *Color-coded for easy tool identification *Optional adapter bushings easily adapt to various tool shafts

The premium Bosch™ 12" Super Handle offers many features not found on other interchangeable tool handles, making it ideal for wide variety of turning tools and applications. *Fill with sand or lead shot to dampen vibration *Super strong 6061 aluminum construction *Comfortable grip *Color-coded for easy tool identification *Adapter bushings easily adapt to various tool shafts *Fits 3/8" dia. tools

The premium Bosch™ 16" Super Handle offers many features not found on other interchangeable tool handles, making it ideal for wide variety of turning tools and applications. *Fill with sand or lead shot to dampen vibration *Super strong 6061 aluminum construction *Comfortable grip *Color-coded for easy tool identification *Adapter bushings easily adapt to various tool shafts

The PM Handle Plug allows you to add sand or lead shot to your tool handle for added weight when needed. Double O-ring design holds plug securely in place. *Fits both 12" and 16" PM Aluminum Tool Handles

Bosch™ Super Handle Adapter Bushings can be used inside one another to adapt various size of tools to fit your Bosch™ Super Handle. *Includes: one- 1/2" to 3/8" adapter bushing & one- 5/8" to 1/2" adapter bushing

The Mid-Size Easy Rougher makes rough turning bowls to shape quick and easy. Unlike traditional bowl gouges that can be difficult to control when shaping an out-of-round blank, the Mid-Size Easy Rougher is designed to direct the cutting pressure downward through the lathe so your lathe "takes a beating" for you. To use, simply hold the Mid-Size Easy Rougher in a horizontal position with the cutter aligned with the center of the work piece and cut away, it’s that easy! There’s no need to sharpen, simply rotate the cutter to expose a fresh cutting edge as needed and replace when dull. Includes premium Ci2 SQ square carbide cutter, mounting screw and wrench and instructions. Made in USA. * For small to medium size work on standard and mini lathes * Milled stainless steel shaft * 14" Maple handle * Includes premium Ci2 SQ square cutter * Tool shank: 3/8" x 7", overall tool length: 21" * Optional Chip Deflector available for blocking wood chips * Made in USA

Machined from solid aircraft grade aluminum, Carter and Son Toolworks premium handles feature a comfortable profile with knurled band on the bulb and ferrule for additional grip. Significantly heavier than a typical wooden handle, these aluminum handles offer additional heft and are equipped with two set screws to hold the blade securely in place at all times.
Accepts 3/4" tang. For smaller tangs, use an adapter sleeve.

Turners Choice™ Tool Handle Blanks are ideal for creating your own one-of-a-kind tool handles. *Blanks are suitable for most turning tools *Heavy Brass ferrule included *Due to difficulty in maintaining a regular supply, wood will not be back ordered if out of stock. *Blank measures: 1-3/4" - 1-3/4" x 16"

For use with Carter and Son Toolworks Aluminum Handles, these adapters reduce the handle bore to fit smaller diameter tools. *Machined from aircraft grade aluminum *Reduces 3/4" handle bore diameter to size indicated *Set screws included

Bosch™ Super Handle Adapter Bushings can be used inside one another to adapt various size of tools to fit your Bosch™ Super Handle. *Adapts 3/8" to 1/4"

Robust Collet Handles let you change tools with a simple twist of the wrist thanks to the collet design. This makes sharpening easier by being able to remove the tool from the handle before mounting it in a sharpening jig. For production turners, sharpening multiple tools at the same time then simply swapping out dull tools for a sharp one saves you time and money.
Based on the popular interchangeable ER collet system securely mounted in a hand-finished solid Maple handle, both the ER25 and ER32 handles include 4 different collet sizes to accommodate most tools.
ER25 Handle 16" Handle Complete Collets in the ER 25 Set- 1/4", 3/8", 1/2", 5/8"
ER32 Handle 20.5" Handle Complete Collets in the ER 32 Set- 3/8", 1/2", 5/8", 3/4"

Turn a one-of-a-kind walking or climbing stick with an Artisan® Brass Cane Handle. *Solid brass design *Polished to glossy sheen *Removable threaded handle *Threaded brass ferrule for easy assembly Specifications: Dimensions: Approx. 1" dia. x 3" tall 4" long Minimum blanks size: (3) 1-1/8" x 1-1/8" x 10-1/2"
Includes: Instructions Project components (blanks not included)
Items needed to complete: Drill bits: 5/16", 29/64" Drill chuck: 1/2" Artisan® Walking Stick Coupler Set

We are now offering complete Robust Collet Handles without the ER collet set. This allows you to buy the handles you want and specific sizes of collets to suit your needs. The means you save money and don’t end up with unwanted collets lying around the shop.
*Includes Handle ONLY

With the Easy Finisher, riding the bevel and complicated bevel angles are a thing of the past. Many projects can be turned from beginning to end with this incredibly versatile tool. The razor sharp carbide cutter leaves a super smooth surface on most woods. To use, simply hold the Easy Finisher in a horizontal position with the cutter aligned with the center of the work piece and cut away, it’s that easy! There’s no need to sharpen, simply rotate the cutter to expose a fresh cutting edge as needed and replace when dull. Includes premium Ci0 round carbide cutter, mounting screw and wrench and instructions. Made in USA
* For medium to large size work on standard lathes * Milled stainless steel shaft * 16" Maple handle * Includes premium Ci0 round carbide cutter * Tool shank: 1/2" x 8-1/2", overall tool length: 24-1/2" * Optional Chip Deflector available for blocking wood chips * Made in USA

The Easy Rougher makes rough turning bowls to shape quick and easy. Unlike traditional bowl gouges that can be difficult to control when shaping an out-of-round blank, the Easy Rougher is designed to direct the cutting pressure downward through the lathe so your lathe "takes a beating" for you. To use, simply hold the Easy Rougher in a horizontal position with the cutter aligned with the center of the work piece and cut away, it’s that easy! There’s no need to sharpen, simply rotate the cutter to expose a fresh cutting edge as needed and replace when dull. Includes premium Ci1 R4 carbide cutter, mounting screw and wrench and instructions. Made in USA * For medium to large size work on standard lathes * Milled Stainless steel shaft * Includes premium Ci1 R4 carbide cutter * Tool shank: 1/2" x 8" * Optional Chip Deflector available for blocking wood chips * Made in USA

A welcome addition to the Easy Wood Tools™ line, the Easy Detailer is an ideal beginner tool designed for general shaping, cutting coves, and reaching into tight areas. The razor sharp cutter leaves a super smooth surface on most woods. *For medium and large size work *Tool measures: 1/2" x 8-1/2" *Uses Ci4 Cutter *Made in USA

Designed for use with the Hollow Roller™ boring bar and other 5/8" diameter shank tools, these accessory handles provide the flexibility you need to suit the work at hand. A Craft Supplies USA favorite, the Hollow Roller™ Short handle is only 5-3/4" long to provide superior control and feel while eliminating the unnecessary weight of the longer standard handle. *Machined from vibration-dampening aluminum *5-3/4" Short Handle features rubberized ergonomic grip and set screw *17" Long Handle features texturized aluminum grip and collet set up *Made in USA

The Robert Sorby® Universal Micro Tool Handle is specifically designed to help woodturners meet the challenges of turning small projects where traditional tools won't do. *7-3/4" long *Strong and durable aluminum construction *Easy-to-grip, textured handle design *5/16" Dia. hole *Accepts all Robert Sorby® Universal Micro Tools

This solid brass Artisan® Brass Cane Handle Coupler will dress up any cane. Made of solid brass, this heavy-duty coupler features one-piece construction for strength and reliability. *Solid brass *One-piece construction Specifications: Dimensions: 1-1/2" dia. x 2" w/ 1" connection Minimum blank size (shaft): 1-1/4" dia. x desired length Minimum blank size (handle): 1-3/8" dia. x desired length
Includes: Instructions (1) Brass coupler (blanks not included) 1/4" dowel screw (for assembly)
Items needed to complete: Drill bit: 3/16"
Replacement items: Components (if available): Call (800) 551-8876

Equally at home turning hollow forms or shear scraping, the Robert Sorby® Midi Straight Shank Multi-Tip Hollowing Tool features a flat bottom shaft that increases contact with the tool rest to counteract torque. Change from pivoting hollowing cutter to shear scraper quickly and easily.
Includes 3 cutting tips Tear drop shear scraper blade 1/8" Round point hollowing cutter Pointed hollowing tip *1/2" Dia. shank *6" Long shank *10" Ash handle *16" Overall length

Quickly and easily adjust Hollow-Pro™ Hollowing Tools with this high quality T-Handle Torx Wrench. *Large T-handle design, with 4" shaft *Comfortable, rubberized grip * No. 25 Torx Wrench fits Hollow-Pro™ Hollowing Tool screws

Add a touch of class to cutlery, mini forks, cheese planes and other small projects with a nickel plated Artisan® Decorative Handle Brad. No drilling required, just tap it into the end of the handle and you’re good to go. *Adds an expensive look without the cost *Easily taps into the bottom of any turned handle *3/8" diameter radiused head *Nickel plating matches stainless steel components and ferrules *Sold as pack of 4

The Robert Sorby® RS2000 Hollowing System Adjustable Side Handle is designed to give turners additional support and control of the Hooker and Slicer tools. Simply slide the handle onto the tool shank, adjust to the desired position and you're ready to go.

The Robert Sorby® TurnMaster™ is an incredibly versatile, heavy-duty turning tool that’s capable of holding any one of a wide range of interchangeable cutters to suit almost any woodturning application. At the heart of the Robert Sorby® TurnMaster™ tool is an indexable cutter head that holds the cutter and locks in 3 positions making it ideal for scraping and both right and left hand shear scraping.
Choose from Tungsten Carbide, High Speed Steel, and Titanium Nitride to suit any turning application. The Robert Sorby® TurnMaster™ tool also features a flat-bottomed shank for added stability while turning and smoother movement along the tool rest. *Indexable cutter head holds cutters for traditional scraping and shear scraping *Interchangeable cutter head design accepts a wide range of TurnMaster™ cutters *Flat-bottomed shank for added stability prevents catches *HSS, Titanium Nitride Coated and Tungsten Carbide cutters available (sold separately) *Ideal for beginners and advanced turners alike *Heavy duty 3/4" diameter shank reduces vibration and adds reach *1/2" Dia. tang *Handled tool measures: 20-5/8" overall with 10" ash handle *Unhandled tool measures: 10-5/8" with 1/2" dia. tang ideal for use with Sovereign Handle Includes: Turnmaster tool Round M2 HSS Cutter Square M2 HSS Cutter Detail M2 HSS Cutter

The new and improved Robert Sorby® Sizing Tool is perfect for making sizing cuts up to 3" in diameter quickly and easily. Simply slide the parting tool into place, set the desired distance between the tip of the tool and inside point of the sizing tool and tighten. To make the cut: position the end of the sizing tool against the work, then lower the tool onto the work in a downward motion. When the sizing tool drops over the work, the desired diameter has been achieved. *Makes sizing cuts up to 3" quick & easy *Instructions included Fits 3/8" straight-sided parting tool 3/8" Bedan Tool

Opening bottles and maintaining freshness is easier than ever with the convenient two-in-one Artisan® Handled Corkscrew/Bottle Stopper. NOTE: Prolonged contact with liquid may cause corrosion or pitting. *Ergonomic handle design for easy cork removal *Threaded solid shaft design for increased strength *Professional quality wire corkscrew won’t split cork *Tapered rubber seal fits most bottles and won’t impart a taste *Long-wearing Chrome plating *Easy-to-turn pen mandrel design Specifications: Finished size: 4" wide x 4-1/4" long Minimum blank size: 3/4" x 3/4" x 5"
Includes: Instructions Project components (blank not included)
Items needed to complete: Drill bit: 7mm Bushings: Artisan® Handled Corkscrew/Bottle Stopper Bushings 7mm Pen mandrel Barrel trimmer head Pilot shaft: 7mm
Replacement items: Brass tubes: Artisan® Handled Corkscrew/Bottle Stopper Tube Set

With the Streamlight® Flexible LED Tool Light, you'll never get stuck in the dark when hollow turning again. Simply attach this bright LED light to any hollowing tool and see the cutting action first hand. Flexible neck allows you to position the light exactly where you need it and stays put. *High-intensity LED lasts 100,000 hours *Flexible 7" extension for 14" of reach *Momentary-on and Constant-on switch *Machined aluminum waterproof body *Runs up to 60 continuous hours on 3 AAAA batteries (included) *Limited Lifetime Warranty *Made in the USA

Finally, a practical and economical way to keep all your tools and lathe accessories in one convenient and easy to reach place! Attach the T-Rex™ Tool Caddy to your lathe bed and keep everything you need right where you need it. Imagine the joy of turning without the headache of misplacing tools or searching through shavings for the right chuck key or wrench. The T-Rex™ Tool Caddy makes organization simple and swings out of the way or hangs on the wall when you’re done. *Laser cut from heavy steel to last a lifetime *Sawtooth side design holds tools secure regardless of heavy vibration *T-Rex™ cut pattern accepts multiple, various sized tools, drivers, keys, wrenches and more - up to 30 for Jumbo Caddy and 20 for Standard Caddy *Lathe bed mounting hardware and self-adhesive Velcro® dots included *Keep hook-and-loop sanding discs handy by attaching some or all of the self-adhesive Velcro® dots to the front side wall *Available in Jumbo or Standard sizes *Fits all full-size lathes (not for use on mini lathes) *Measures 22" x 8" x 2" *Made in USA *Specify clamp block size when ordering

Finally, a practical and economical way to keep all your tools and lathe accessories in one convenient and easy to reach place! Attach the T-Rex™ Tool Caddy to your lathe bed and keep everything you need right where you need it. Imagine the joy of turning without the headache of misplacing tools or searching through shavings for the right chuck key or wrench. The T-Rex™ Tool Caddy makes organization simple and swings out of the way or hangs on the wall when you’re done. *Laser cut from heavy steel to last a lifetime *Sawtooth side design holds tools secure regardless of heavy vibration *T-Rex™ cut pattern accepts multiple, various sized tools, drivers, keys, wrenches and more - up to 30 for Jumbo Caddy and 20 for Standard Caddy *Lathe bed mounting hardware and self-adhesive Velcro® dots included *Keep hook-and-loop sanding discs handy by attaching some or all of the self-adhesive Velcro® dots to the front side wall *Available in Jumbo or Standard sizes *Fits all full-size lathes (not for use on mini lathes) *Measures 15-3/4" x 6" x 2" *Made in USA *Specify clamp block size when ordering

The Robert Sorby® TurnMaster™ is an incredibly versatile, heavy-duty turning tool that’s capable of holding any one of a wide range of interchangeable cutters to suit almost any woodturning application. At the heart of the Robert Sorby® TurnMaster™ tool is an indexable cutter head that holds the cutter and locks in 3 positions making it ideal for scraping and both right and left hand shear scraping.
Choose from Tungsten Carbide, High Speed Steel, and Titanium Nitride to suit any turning application. The Robert Sorby® TurnMaster™ tool also features a flat-bottomed shank for added stability while turning and smoother movement along the tool rest. *Indexable cutter head holds cutters for traditional scraping and shear scraping *Interchangeable cutter head design accepts a wide range of TurnMaster™ cutters *Flat-bottomed shank for added stability prevents catches *HSS, Titanium Nitride Coated and Tungsten Carbide cutters available (sold separately) *Ideal for beginners and advanced turners alike *Heavy duty 3/4" diameter shank reduces vibration and adds reach *1/2" Dia. tang *Handled tool measures: 20-5/8" overall with 10" ash handle *Unhandled tool measures: 10-5/8" with 1/2" dia. tang ideal for use with Sovereign Handle (requires 1/2" collet adapter)

If your primary interest is turning bowls 12" or larger, a 5/8" bowl gouge is must have tool. The workhorse of any bowl turner’s tool set, this superb bowl gouge is precision machined from M42 high speed steel and triple tempered for strength and durability.
*Includes Carter & Son aluminum handle *Easy to use profile and bevel angle *Ideal for push and pull type cuts *Light cut produces fine surface Specifications: Blade measures: 5/8" dia. x 13" overall Flute measures: 1/2" x 8" Handle size: 16" Tang size: 5/8" dia.
M42 high speed steel is considered by many top turners to be the "holy grail" of tool steel for woodturning.  Unlike other types of high speed steel that sacrifice extreme edge retention for the ability to be honed to a keen edge, or vice versa, M42 offers both for optimum performance you can count on.
*Extreme edge retention *Sharpens to a very keen edge *Made in the USA

The 1/2" skew by Carter and Son Toolworks is machined from M42 high speed steel and triple tempered for strength and durability.
*Includes Carter & Son aluminum handle *User friendly cutting edge profile *Radiused cutting edge reduces likelihood of a catch *Perfect for pens, small projects and spindles Specifications: Blade measures: 1/2" wide, 9-1/2" overall Tang size: 1/2" dia. Handle size: 12"
M42 high speed steel is considered by many top turners to be the "holy grail" of tool steel for woodturning.  Unlike other types of high speed steel that sacrifice extreme edge retention for the ability to be honed to a keen edge, or vice versa, M42 offers both for optimum performance you can count on.
*Extreme edge retention *Sharpens to a very keen edge *Made in the USA

Available exclusively from Craft Supplies USA, the Carter and Son Toolworks Radius Scraper features an asymmetric round nose that is highly effective for improving the internal surfaces of bowls and platters. It is equally effective on end grain projects like boxes, goblets, and scoops.
Its heavy 3/8" thick cross section and 3/4" dia. tang dampens vibration and provides stability while the premium M42 high speed steel provides unparalleled edge holding ability.
*Includes Carter & Son aluminum handle *Perfect for final shaping on bowls and platters *Easy to control when making light cuts *Profile works on most shapes and contours *Heavy blade cross section eliminates vibration Specifications: Blade: 6-1/2" x 1" x 3/8" Tang: 3/4" dia. x 2-3/4" long Handle size: 16"
M42 high speed steel is considered by many top turners to be the "holy grail" of tool steel for woodturning.  Unlike other types of high speed steel that sacrifice extreme edge retention for the ability to be honed to a keen edge, or vice versa, M42 offers both for optimum performance you can count on.
*Extreme edge retention *Sharpens to a very keen edge *Made in the USA

One of the most useful tools you can have in your toolbox, a 3/8" spindle gouge is designed for general purpose turning and between center work including shallow bowls, boxes, pens and other small projects. It’s also perfect for cutting small detail and decorative lines on larger bowls and platters.
*Includes Carter & Son aluminum handle *Easy to use profile and bevel angle *Perfect for pens, boxes and small projects Specifications: Blade measures: 3/8" dia. x 8" overall Flute measures: 4-1/4" long Tang size: 3/8" dia. Handle size: 12"
M42 high speed steel is considered by many top turners to be the "holy grail" of tool steel for woodturning.  Unlike other types of high speed steel that sacrifice extreme edge retention for the ability to be honed to a keen edge, or vice versa, M42 offers both for optimum performance you can count on.
*Extreme edge retention *Sharpens to a very keen edge *Made in the USA

A strong, dependable parting tool is one tool that every woodturner needs. No other tool can effectively replace a parting tool and the many functions it performs.
The 1/8" parting tool by Carter and Son Toolworks is machined from M42 high speed steel and triple tempered for strength and durability.
*Includes Carter & Son aluminum handle *A must have tool for every woodturner *Straight-sided for strength and rigidity *Perfect for pens, boxes and small projects Specifications: Blade measures: 1/8" x 9-1/2" overall Tang size: 1/2" Handle size: 12"
M42 high speed steel is considered by many top turners to be the "holy grail" of tool steel for woodturning.  Unlike other types of high speed steel that sacrifice extreme edge retention for the ability to be honed to a keen edge, or vice versa, M42 offers both for optimum performance you can count on.
*Extreme edge retention *Sharpens to a very keen edge *Made in the USA

The Carter and Son Toolworks Bedan tool is machined from M42 high speed steel and triple tempered for strength and durability.
*Includes Carter & Son aluminum handle *Made from premium M42 HSS with 10% cobalt *Perfect for between center work, boxes and more *Hones to a finer edge *Superior edge holding ability *Hardened to 68 HRC *Made in USA Specifications: Blade measures: 3/8" wide x 5-1/2", 9-1/2" overall Tang size: 3/8" round
M42 high speed steel is considered by many top turners to be the "holy grail" of tool steel for woodturning.  Unlike other types of high speed steel that sacrifice extreme edge retention for the ability to be honed to a keen edge, or vice versa, M42 offers both for optimum performance you can count on.
*Extreme edge retention *Sharpens to a very keen edge *Made in the USA

Manufactured from solid 7/8" diameter M42 High-Speed steel, the Carter and Son Toolworks Spindle Roughing Gouge is built to handle any spindle roughing task.
*Includes Carter & Son aluminum handle *Makes roughing fast and easy *Wide flute for maximum chip clearing *Made from M42 HSS with 10% cobalt *Superior edge holding ability *Hardened to 68 HRC *Made in USA Specifications: Blade measures: 7/8" dia. x 9-5/8" overall Flute measures: 1/2" x 5" Tang size: 5/8" dia.
M42 high speed steel is considered by many top turners to be the "holy grail" of tool steel for woodturning.  Unlike other types of high speed steel that sacrifice extreme edge retention for the ability to be honed to a keen edge, or vice versa, M42 offers both for optimum performance you can count on.
*Extreme edge retention *Sharpens to a very keen edge

The Replacement Finish Jar is designed to fit the Finish Jar Handle. If you have a Finish Jar full of stale finish that needs replacing, no need to throw away the handle and lid, simply replace the jar. The jar holds 1 pint. 16 oz jar size.

These premium quality Torx wrenches are the same as those recommended by Mike Jackofsky for use with his Hollow-Pro Hollowing Tools. The flag style handle makes getting a positive grip easy when changing carbide cutters.
*Flag style handle for positive grip *Molded handle for comfort *Exact fit machined tips *Blades of high performance CRM 72 tool steel *Black oxide finish *Through hardened shank for maximum durability *Made in Germany

Gluing a waste block to the bowl blank prior to mounting the faceplate eliminates material loss caused by using screws. When finished, you can face off the waste block and use it again. *Blank size: 4" dia. x 7/8" thick *Sold as pack of 5

The 3/8" detail spindle gouge is the same tool as the 3/8" spindle gouge but is supplied with a long point and swept back grind that allows you to make fine detail cuts and access hard to reach areas on all types of work including shallow bowls, boxes, pens and other small projects. It’s also perfect for cutting small detail and decorative lines on larger bowls and platters.
The 3/8" detail spindle gouge by Carter and Son Toolworks is machined from M42 high speed steel and triple tempered for strength and durability.
*Includes Carter & Son aluminum handle *Long cutting point for detail work *Works in hard to reach areas *Perfect for pens, boxes and small projects Specifications: Blade measures: 3/8" dia. x 8" overall Flute measures: 1/4" x 3" Tang size: 3/8" dia. Handle size: 12"
M42 high speed steel is considered by many top turners to be the "holy grail" of tool steel for woodturning.  Unlike other types of high speed steel that sacrifice extreme edge retention for the ability to be honed to a keen edge, or vice versa, M42 offers both for optimum performance you can count on.
*Extreme edge retention *Sharpens to a very keen edge *Made in the USA

The 1" Negative Rake Scraper by Carter and Son Toolworks is a superb scraping tool made from M42 high speed steel for optimum edge holding ability and its ability to be sharpened to a keen edge.
Negative rake scrapers are superior to traditional scrapers because of their ability to produce a clean finishing cut on end-grain, hard and high-figured woods as well as stabilized wood and plastics. The negative rake angle on the Negative Rake Scraper by Carter and Son makes it non-aggressive and easy to control when making heavy or light cuts without the risk of a catch which is common when using standard scrapers.
*Includes a Carter & Son aluminum handle
Specifications: Blade measures: 1" wide by 3/8" thick Overall blade length: 9-1/2" Tang size: 3/4" dia. M42 high speed steel is considered by many top turners to be the "holy grail" of tool steel for woodturning.  Unlike other types of high speed steel that sacrifice extreme edge retention for the ability to be honed to a keen edge, or vice versa, M42 offers both for optimum performance you can count on.
*Extreme edge retention *Sharpens to a very keen edge *Sharp and ready to use straight from the package *Made in the USA

M42 Stay Sharp tools by Henry Taylor set a new standard for quality and performance in woodturning tools. Unlike other types of high speed/PM tool steel that sacrifice extreme edge retention for the ability to be honed to a keen edge, or vice versa, M42 Stay Sharp tools provide both for optimum performance you can count on. Made in England
*M42 ‘super steel’ for optimum edge holding ability *Can be honed to a razor sharp edge *Parabolic flute profile for easier sharpening and superb chip clearing *Double bevel grind for faster, cleaner cuts *Supplied with hand-polished stained beech handle *Sharp, ready to use out of the box

Enjoy adding depth, pattern and texture to your woodturnings with a Razertip® Pyrographic Mini Writing Tip Pen. *Vented pvc handle *Soft foam grip *Ideal for miniature writing and signing woodturnings