Every woodturner will enjoy the hassle-free operation of this top quality Turners Select™ 1/2" Keyless Drill Chuck. Keyless chucks not only eliminate the frustration of lost chuck keys, they are fast acting, accurate, and hold the drill bit securely in place.

The Turners Select™ 1/2" Key Drill Chuck is one of the most useful accessories for the lathe. It enables the lathe to perform many of the functions of a drill press, with the key chuck holding tool bit shanks up to 1/2" diameter. It allows the turner to use twist drills, spade bits, and forstner bits to bore vases, tool handles, lamps, etc., as well as depth holes in bowls. A quality chuck at an economy price.

Turners Select™ Dowel Chucks are specifically designed to hold wooden dowels used in making wine bottle stoppers. *1/2" chuck holds Turners Select™ Silicone Bottle Stopper Dowels *3/8" chuck holds Turners Select™ Serrated Maple Dowels *Chuck jaws are bored out so that they make contact around the entire circumference of the dowel, giving you a positive grip without marking *Ideal for small diameter projects such as spinning tops *No. 2MT

The most accurate way to drill a pen or project blank is on your lathe. With Vicmarc Pen Blank Drilling Jaws, you can confidently drill blanks knowing you’ll get an accurate, centered hole every time. Drilling pressure is easily controlled using the tailstock handwheel, virtually eliminating exit hole breakout that’s common to plastics. *Most accurate way to drill pen and project blanks *Controlled drilling pressure eliminates exit hole break-out *V-groove design securely grips and supports blank on all 4 sides *Grips blanks from 7/16" to 1-7/8" diameter *Designed for use on Vicmarc brand chucks *Available for VM90/100 and VM120/150 chucks
Note: Drilling on the lathe requires that the headstock and tailstock be accurately aligned otherwise an oversize hole may result when drilling. For drilling only, not for use when turning.

The Vicmarc® Extended Dovetail Jaw Set fits VM100, VM120 and VM150 Chucks and can be used for traditional chuck using the exterior dovetail while providing the benefit of moving the work away from the headstock for more working room. Ue these jaws in expansion mode for chucking pre-drilled stock such as pepper mills, vases, and kaleidoscopes. *Durable machined steel *Black oxide finish
*VM100 Chuck Compression range: 1/4" - 1-13/16" Expansion range: 1-9/32" - 2-7/8"
*VM120/VM150 Chuck Compression range: 1/4" - 1-25/64" Expansion range: 1-5/16" - 2-15/32"

The Vicmarc® Pin Jaw Set fits VM100, VM120 & VM150 Chucks and features a 1" spigot design that's ideal for use on pre-drilled work such as small boxes and pepper mills where extended reach is important. *Durable machined steel *1" Spigot design for extended reach *Black oxide finish\
*VM100 Chuck Jaw Set Compression range: 1/4" - 1-3/4" Expansion range: 1" - 2-3/8"
*VM120/VM150 Chuck Jaw Set Compression range: 1/4" - 1-3/4" Expansion range: 7/8" - 2-3/8"

The Oneway® Profiled Spigot Jaw Set features a serrated jaw profile for increased gripping power and is ideal for use on pre-drilled work such as small boxes and pepper mills where extended reach is important. *Durable machined steel *Serrated jaw profile for increased gripping power
*Talon Chuck Jaw Set Compression range: 1/4" - 1-3/4" Expansion range: 11/16" - 2-1/2"
*Stronghold Chuck Jaw Set Compression range: 3/8" - 2" Expansion range: 1-1/8" - 2-5/8"

The Oneway® Smooth Spigot Jaw Set features a smooth jaw profile that won't damage the foot of the workpiece and is ideal for use on pre-drilled work such as small boxes and pepper mills where extended reach is important. *Durable machined steel *Smooth jaw profile won't damage foot of workpiece
*Talon Chuck Jaw Set Compression range: 1/4" - 1-7/8" Expansion range: 1-1/8" - 2-3/4"
*Stronghold Chuck Jaw Set Compression range: 3/8" - 2" Expansion range: 1" - 2-5/8"

The Vicmarc® 5" Dovetail Jaw Set fits VM100, VM120 and VM150 Chucks and is capable of chucking bowls by clamping down on a foot or tenon using the jaw's interior dovetail or expanding into a dovetail recess with the jaw's exterior dovetail. *Durable machined steel *Black oxide finish
*VM100 Chuck Jaw Set Compression range: 5" - 6-1/2" Expansion range: 5-5/8" - 7-1/8"
*VM120/VM150 Chuck Jaw Set Compression range: 4-1/8" - 5-7/8" Expansion range: 5" - 6-3/4"

The Oneway® Jumbo Jaw Set is ideal for making light finishing cuts on the backs of bowls or for external chucking on platters. *Durable machined aluminium *8 Rubber grippers protect the workpiece from marking or marring *Fits lathes with 12" capacity
*Talon Chuck Jumbo Jaw Set Compression range: 2-7/8" - 11-1/2" Expansion range: 4-7/8" - 12-1/2"
*Stronghold Chuck Jumbo Jaw Set Compression range: 2-3/4" - 11-1/2" Expansion range: 4-3/4" - 12-7/8"

The Vicmarc® Step Jaw Set fits VM100, VM120 and VM150 Chucks and can be used to grip different diameters of stock using the steps inside the jaw or to expand into a dovetail recess using the exterior dovetail. *Durable machined steel *Black oxide finish
*VM100 Chuck Jaw Set Compression range: 1-3/4" - 4-3/4" Expansion range: 3-7/8" - 5-3/8"
*VM120/VM150 Chuck Jaw Set Compression range: 2" - 6-1/8" Expansion range: 5" - 6-3/4"

The Vicmarc® 1-3/8" Shark Jaw Set fits VM100, VM120 and VM150 Chucks and can be used as traditional dovetail jaws or to clamp down on a tenon. Serrated ridges along the interior and exterior of the jaw provide an aggressive grip. *Durable machined steel *Black oxide finish
*VM100 Chuck Jaw Set Compression range: 1-3/8" - 2-7/8" Expansion range: 1-7/8" - 3-3/8"
*VM120/VM150 Chuck Jaw Set Compression range: 1-3/8" - 3" Expansion range: 2-1/8" - 3-7/8"

The Vicmarc® 1-3/4" Shark Jaw Set fits VM100, VM120 and VM150 Chucks and can be used as traditional dovetail jaws or to clamp down on a tenon. Serrated ridges along the interior and exterior of the jaw provide an aggressive grip. *Durable machined steel *Black oxide finish
*VM100 Chuck Jaw Set Compression range: 1-5/8" - 3-1/8" Expansion range: 2-1/8" - 3-1/2"
*VM120/VM150 Chuck Jaw Set Compression range: 1-7/8" - 3-5/8" Expansion range: 2-5/8" - 4-3/4"

The Vicmarc® Long Nose Jaw Set fits VM100, VM120 and VM150 Chucks and is designed to get the workpiece away from the headstock. These long nose jaws are capable of holding heavy work and can be used in either an expanding or contracting dovetail mode. They are also ideal for gripping round stock. *Durable machined steel *Black oxide finish
*VM100 Chuck Compression range: 7/8" - 1-3/8" Expansion range: 1-1/4" - 3"
*VM120/VM150 Chuck Compression range: 1-1/8" - 2-7/8" Expansion range: 1-3/4" - 3-5/8"

The Oneway® Profiled No. 2 Jaw Set features a serrated dovetail profile for increased gripping power on bowls, platters, and more. *Durable machined steel *Black oxide finish
*Talon Chuck Jaw Set Compression range: 1-5/8" - 3" Expansion range: 2" - 3-5/8"
*Stronghold Chuck Jaw Set Compression range: 2-3/8" - 4" Expansion range: 1-3/4" - 3-1/4"

Without a doubt, these are the finest adjustable jaws on the market. The Vicmarc® 14" Adjusta-Jaw Set fits Vicmarc® VM100, VM120, and VM150 Chucks and is designed for holding work while making light finishing cuts or sanding the bottom of bowls and platters. *Premium four-sided, concave soft plastic grippers provide full contact with the workpiece *Durable machined aluminium *Fits lathes with 20" capacity
*VM100 Chuck Jaw Set Compression range: 4" - 14-1/2" Expansion range: 6-1/4" - 16-1/2"
*VM120/VM150 Chuck Jaw Set Compression range: 4" - 14-3/4" Expansion range: 6-1/4" - 16-1/2"

The Oneway® Smooth No. 2 Jaw Set features a smooth dovetail profile for gripping power on bowls, platters, and more. *Smooth dovetail profile won't damage foot of workpiece *Durable machined steel *Black oxide finish
*Talon Chuck Jaw Set Compression range: 1-5/8" - 3" Expansion range: 2" - 3-5/8"
*Stronghold Chuck Jaw Set Compression range: 2-5/8" - 4-1/2" Expansion range: 2" - 3-1/2"

Without a doubt, these are the finest adjustable jaws on the market. The Vicmarc® 10" Adjusta-Jaw Set fits Vicmarc® VM100, VM120, and VM150 Chucks and is designed for holding work while making light finishing cuts or sanding the bottom of bowls and platters. *Premium four-sided, concave soft plastic grippers provide full contact with the workpiece *Durable machined aluminium *Fits lathes with 16" capacity
*VM100 Chuck Jaw Set Compression range: 3-1/2" - 10-5/8" Expansion range: 5-3/4" - 12-1/2"
*VM120/VM150 Chuck Jaw Set Compression range: 3-1/2" - 10-3/4" Expansion range: 5-3/4" - 12-1/2"

The Oneway® Profiled No. 3 Jaw Set features a serrated jaw profile for increased gripping power along with the mass and size necessary for holding large bowls and vessels. *Serrated profile for increased gripping power *Durable machined steel *Black oxide finish
*Talon Chuck Jaw Set Compression range: 3-3/8" - 4-3/4" Expansion range: 3-7/8" - 5-3/8"
*Stronghold Chuck Jaw Set Compression range: 3-7/8" - 5-1/4" Expansion range: 4-1/2" - 6"

The Oneway® Smooth No. 3 Jaw Set features a smooth jaw profile that won't damage the foot of the workpiece along with the mass and size necessary for holding large bowls and vessels. *Smooth profile won't damage foot of workpiece *Durable machined steel *Black oxide finish
*Talon Chuck Jaw Set Compression range: 3-1/8" - 4-1/2" Expansion range: 3-7/8" - 5-1/2"
*Stronghold Chuck Jaw Set Compression range: 3-5/8" - 5" Expansion range: 4-3/8" - 6"

Replace worn or damaged grippers on your Vicmarc® Adjusta-Jaw Set with the Vicmarc® Adjusta-Jaw Replacement Gripper Set. *Includes 8 replacement grippers

The Vicmarc® VM100 Chuck Faceplate Ring can take the place of traditional faceplates for turning green wood that requires returning later on. *Fits standard jaws supplied on chuck

The Vicmarc® VM120/VM150 Chuck Faceplate Ring can take the place of traditional faceplates for turning green wood that requires returning later on. *Fits standard jaws supplied on chuck *6" Faceplate ring requires 5" Dovetail Jaw Set for use

This fastening kit is designed to fit both the SC3 and SC4 chucks. *Fits both SC3 & SC4 Includes: 8 hex jaw screws 3 and 4 mm hex wrenches Blind set screw with fiber washer

8 Jaw screws for Vicmarc VM100 Chuck

8 Jaw screws for the Oneway Talon and Stronghold Chucks.

The most accurate way to drill a pen or project blank is on your lathe. With these pen jaws, you can confidently drill blanks knowing you’ll get an accurate, centered hole every time. Drilling pressure is easily controlled using the tailstock handwheel, virtually eliminating exit hole breakout that’s common to plastics.
Note: Drilling on the lathe requires that the headstock and tailstock be accurately aligned otherwise an oversize hole may result.
*Compression range: 3/8" – 1" *Expansion Range: 1-3/8" – 2-1/2"

The SC3 and SC4 are supplied with the indispensable Record Power woodworm screw. Ideal for mounting bowl blanks, this screw is held in the jaws of the chuck, giving exceptional holding power. This means a separate wood screw chuck need not be used and the chuck can stay on the lathe, saving time and effort. *Tapered to easily mount into a 3/8" dia. pilot hole *Overall length: 1-15/16" *Thread length: 7/8" *Right hand thread

The Oneway® Internal Step Jaw Set features a series of stepped rings to provide internal gripping power when turning small projects. *Durable machined steel *Black oxide finish *Fits Oneway® Talon Chuck

The Oneway® Mini Jumbo Jaw Set is ideal for making light finishing cuts on the backs of bowls or for external chucking on platters. *Durable machined aluminium *8 Rubber grippers protect the workpiece from marking or marring *Fits lathes with 10" capacity *Fits Oneway® Talon Chuck only *Compression range: 2" - 8-1/8" *Expansion range: 4" - 10-1/8"

The Vicmarc® 2" Dovetail Jaw Set fits VM100 Chucks and is capable of chucking bowls by clamping down on a foot or tenon using the jaw's interior dovetail or expanding into a dovetail recess with the jaw's exterior dovetail. *Durable machined steel *Black oxide finish *Compression range: 1-1/4" - 2-3/4" *Expansion range: 1-3/4" - 3-1/4"

The Vicmarc® 2-1/2" Dovetail Jaw Set fits VM120 and VM150 Chucks and is capable of chucking bowls by clamping down on a foot or tenon using the jaw's interior dovetail or expanding into a dovetail recess with the jaw's exterior dovetail. *Durable machined steel *Black oxide finish *Compression range: 1-7/8" - 3-5/8" *Expansion range: 2-5/8" - 4-3/8"

The Oneway® Mega Jumbo Jaw Set is ideal for making light finishing cuts on the backs of bowls or for external chucking on platters. *Durable machined aluminium *8 Rubber grippers protect the workpiece from marking or marring *Fits lathes with 16" capacity *Fits Oneway® Stronghold Chuck only *Compression range: 1-3/4" - 14" *Expansion range: 4-3/4" - 15"

The Vicmarc® 4" Dovetail Jaw Set fits VM100 Chucks and is capable of chucking bowls by clamping down on a foot or tenon using the jaw's interior dovetail or expanding into a dovetail recess with the jaw's exterior dovetail. *Durable machined steel *Black oxide finish *Compression range: 3-1/4" - 4-3/4" *Expansion range: 3-7/8" - 5-3/8"

The Vicmarc® 3-1/2" Cup Jaw Set fits VM120 and VM150 Chucks and provides superior gripping power and flexibility. They will do everything standard jaws will do in addition to chucking large diameter tenons, gripping high up the piece than standard jaws adn reaching deep into rough turned bowls for rechucking. *Durable machined steel *Black oxide finish *Compression range: 2-1/2" - 3-3/4" *Expansion range: 3-1/4" - 4-1/2"

The Vicmarc® 4-7/8" Cup Jaw Set fits VM120 and VM150 Chucks and provides superior gripping power and flexibility. They will do everything standard jaws will do in addition to chucking large diameter tenons, gripping high up the piece than standard jaws adn reaching deep into rough turned bowls for rechucking. *Durable machined steel *Black oxide finish *Compression range: 4-3/8" - 6-1/8" *Expansion range: 5-1/8" - 6-7/8"

Designed for use with 2" dovetail jaws, these faceplate rings are ideal for holding small to medium size bowls. They can be left on rough turned bowls during the drying process making re-chucking easy later on.

These jaws are a must-have for woodturners who enjoy turning small projects such as pepper mills, finials, boxes, ornaments and more. Ideal for gripping pre-drilled stock, they also provide easy access for tooling the base of the work piece. The dovetail profile on the exterior of the jaws provide a positive grip without marking.
*Compression range: 3/8" – 1-1/8" *Expansion range: 1-1/8" – 1-7/8"

EWT’s Big Easy Jaws are just the ticket for re-chucking bowls for final shaping and finishing. Some of the advantages of being able to re-chuck a bowl include: light turning for shaping, removing damaged wood left by the chuck and customizing the base for just the right look.
Big Easy Jaws are supplied with tapered non-marking urethane grippers that hold the work securely in place. Not only are these jaws capable of gripping the interior of reverse curve bowls as well as the exterior of open form bowls, the full range of gripper mounting holes let you position them as needed to fit almost any size bowl.
As with all Easy Chuck accessories, Big Easy Jaws utilize Snap-Lock technology for fast jaw changing. Choose from a 12" model for smaller lathes or 16" model for larger lathes. With the optional 20" Big Easy Extensions, you can grip bowls up to 20" in diameter. And, if you’re in need of additional gripping surface or longer reach, the optional 2" Easy Reach Grippers will help you get the job done.
12" Jaw Specifications Compression: 3" - 10" Expansion: 5" - 12"
16" Jaw Specifications Compression: 3" - 14" Expansion: 5" - 16"
Includes: *Jaw plates *8 grippers *Mounting screws

These deep, heavy-duty jaws feature a robust cross section for strength, dovetail interior and exterior taper on the end of the jaw for traditional chucking and a series of serrations on the interior to provide a tenacious grip on a spigot. The large face of the jaw provides excellent registration for the work piece making it ideal for large bowls and platters.
*Compression range: 1-15/16" – 2-11/16" *Expansion range: 3-5/16" – 4-1/16"

For bowls and platters up to 6" diameter. With the Easy Wood Tools™ Easy Chuck™ changing an entire set of jaws takes about 30 seconds.  Easy Wood Tools™ patent-pending Snap-Lock Technology eliminates the need to remove jaw slides and jaw screws saving you time and money.  Simply insert the small t-handle wrench into the small hole located in the jaw and press to unlock the jaw from the jaw slide.  To install, simply slide the jaw into the chuck.  When you hear the snap, the jaw is locked in place and ready to go! *Compression range: 1-3/8" - 2-7/16" *Expansion range: 2" - 3-3/16" *Quick and Easy:  No changing screws or removing jaw slides *Safety Corners: Rounded corners of the top jaws reduce chance of injury to knuckles *Durable Components: Easy Jaw components are hardened and corrosion resistant for extreme durability.

The Oneway® No. 6 Aluminium Jaw Set is designed to hold platters up to 36" dia. or bowls up to 26" dia. and 6" deep and offers incredible holding power with Oneway® patented profiled jaw design. *Durable machined aluminium *Fits Oneway® Stronghold Chuck *Compression range: 6-1/8" - 7-3/8" *Expansion range: 6-3/4" - 8-3/8"

For small projects up to 5" diameter With the Easy Wood Tools™ Easy Chuck™ changing an entire set of jaws takes about 30 seconds.  Easy Wood Tools™ patent-pending Snap-Lock Technology eliminates the need to remove jaw slides and jaw screws saving you time and money.  Simply insert the small t-handle wrench into the small hole located in the jaw and press to unlock the jaw from the jaw slide.  To install, simply slide the jaw into the chuck.  When you hear the snap, the jaw is locked in place and ready to go! *Compression range: 1/2" - 1-11/16" *Expansion range: 1-1/4" - 2-7/16" *Quick and Easy:  No changing screws or removing jaw slides *Safety Corners: Rounded corners of the top jaws reduce chance of injury to knuckles *Durable Components: Easy Jaw components are hardened and corrosion resistant for extreme durability.

The Vicmarc® Mega Dovetail Jaw Set fits Vicmarc® VM150 and VM120 Chucks and features a heavier cross section than standard deovetail jaws, which provides additional strength and surface contact. This oversized dovetail jaw set is designed for holding extra large work particularly while bowl coring. *Durable machined steel *Smooth jaw profile won't damage foot of workpiece
*6" Mega Dovetail Jaw Set Compression range: 5" - 6-7/8" Expansion range: 5-7/8" - 7-1/2"
*7" Mega Dovetail Jaw Set Compression range: 6" - 7-3/4" Expansion range: 6-3/4" - 8-1/2"
*8" Mega Dovetail Jaw Set Compression range: 7" - 8-3/4" Expansion range: 7-3/4" - 9-1/2"
*9" Mega Dovetail Jaw Set Compression range: 8" - 9-5/8" Expansion range: 8-3/4" - 10-1/2"

Without a doubt, these are the finest adjustable jaws on the market. The Vicmarc® 18" Adjusta-Jaw Set fits Vicmarc® VM120 and VM150 Chucks and is designed for holding work while making light finishing cuts or sanding the bottom of bowls and platters. *Premium four-sided, concave soft plastic grippers provide full contact with the workpiece *Durable machined aluminium *Fits lathes with 24" capacity *Compression range: 4-1/2" - 18-1/4" *Expansion range: 6-1/2" - 20-1/4"

The Oneway® Profiled No. 4 Jaw Set features a serrated jaw profile for increased gripping power and is ideal for holding larger pieces. *Serrated profile for increased gripping power *Durable machined steel *Black oxide finish *Fits Oneway® Stronghold Chuck *Compression range: 4-1/4" - 5-3/4" *Expansion range: 4-7/8" - 6-1/2"

With the Easy Wood Tools™ Easy Chuck™ changing an entire set of jaws takes about 30 seconds.  Easy Wood Tools™ patent-pending Snap-Lock Technology eliminates the need to remove jaw slides and jaw screws saving you time and money.  Simply insert the small t-handle wrench into the small hole located in the jaw and press to unlock the jaw from the jaw slide.  To install, simply slide the jaw into the chuck.  When you hear the snap, the jaw is locked in place and ready to go! *Quick and Easy:  No changing screws or removing jaw slides *Safety Corners: Rounded corners of the top jaws reduce chance of injury to knuckles *Durable Components: Easy Jaw components are hardened and corrosion resistant for extreme durability. 2-3/8" Jaws Specifications: For bowls and platters up to 12" diameter. Compression range: 2-3/8" - 3-3/8" Expansion range: 3" - 4-3/16"
3-1/2" Jaws Specifications: For bowls and platters up to 24" diameter. Compression range: 3-1/2" - 4-7/16" Expansion range: 4-3/16" - 5-3/8"

Remounting jaws are very popular as they allow you to re-chuck bowls and projects for light reshaping, removing tooling marks as well as creating decorative elements on the foot of the bowl. Soft rubber grippers hold the work comfortably in place without marring. Cast aluminum construction with 8 rubber grippers and 8 standard screws.
*Cast aluminum construction *Can be used for expansion and compression *Non-marking soft rubber stoppers Mega Jaws Specifications Compression range: 2-1/8" – 10-7/8" Expansion range: 3-1/2" – 12-3/8" Can be used on a 14" capacity lathe or larger
Mini Jaws Specifications Compression range: 2-1/4" – 6-3/4" Expansion range: 3-3/4" – 8-1/4" Can be used on a 10" capacity lathe or larger
Includes: 4 piece jaw set 8 round rubber grippers 8 square rubber grippers (Mega Jaws only) 8 screws

The Oneway® Smooth No. 4 Jaw Set features a smooth jaw profile that won't damage the foot of the workpiece and is ideal for holding larger pieces. *Smooth profile won't damage the foot of the workpiece *Durable machined steel *Black oxide finish *Fits Oneway® Stronghold Chuck *Compression range: 4-1/4" - 5-3/8" *Expansion range: 5" - 6-1/2"

Without a doubt, these are the finest adjustable jaws on the market. The Vicmarc® 8" Adjusta-Jaw Set fits Vicmarc® VM100 Chucks and is designed for holding work while making light finishing cuts or sanding the bottom of bowls and platters. *Premium four-sided, concave soft plastic grippers provide full contact with the workpiece *Durable machined aluminium *Fits lathes with 10" capacity *Compression range: 3-1/2" - 8-1/4" *Expansion range: 5-3/4" - 9-7/8"

Replace worn or damaged grippers on your Oneway® Mega Jumbo, Jumbo Jaw or Mini Jumbo Jaw Set with the Oneway® Jumbo Jaw Replacement Gripper Set. *Includes 8 replacement grippers *Choose either standard screw length or long screw length for stacking grippers

These jaws are a smaller version of the Standard 2" Jaws, featuring the same interior dovetail taper with hawk beak profile for a powerful grip on a spigot. The smooth dovetail taper on the exterior is ideal for expansion into a tapered recess such as the base of a bowl.
*Compression range: 1-1/8" – 1-7/8" *Expansion range: 1-3/8" – 2-1/4"