The Artisan® Superflute Bowl Gouge is a superb woodturning tool and is very popular worldwide. Since its introduction in 1978, the Superflute Bowl Gouge has become the most popular bowl turning gouge ever. *6" Flute *M2 High-speed steel *Premium ash handle *Parabolic flute Artisan® woodturning tools provide an economical alternative to other more expensive high-speed steel tools without sacrificing quality or performance. Though not as highly polished as standard Henry Taylor tools, Artisan® tools are made of the same top quality heat-treated M2 high-speed steel and premium ash handles as standard Henry Taylor tools, but at a lower price.

The Artisan® Irish Grind Bowl Gouge features a non-traditional, swept-back grind that was devised and refined by various professional woodturners in Ireland and Scotland. Very popular among intermediate and advanced level turners, the Irish Grind Bowl Gouge is designed to quickly remove large quantities of stock while leaving a smooth finish. *6" Flute *M2 High-speed steel *Premium ash handle *Parabolic flute Artisan® woodturning tools provide an economical alternative to other more expensive high-speed steel tools without sacrificing quality or performance. Though not as highly polished as standard Henry Taylor tools, Artisan® tools are made of the same top quality heat-treated M2 high-speed steel and premium ash handles as standard Henry Taylor tools, but at a lower price.

Each bowl gouge is supplied with a hand ground swept-back profile and bevel angle as recommended by top professional instructors in our workshop program. This means every Carter and Son Toolworks bowl gouge will be razor sharp and user friendly to help you achieve maximum success.
*Easy to use profile and bevel angle *Ideal for push and pull type cuts *Light cut produces fine surface *Hand ground by Craft Supplies USA professionals *Sold Unhandled M42 high speed steel is considered by many top turners to be the "holy grail" of tool steel for woodturning.  Unlike other types of high speed steel that sacrifice extreme edge retention for the ability to be honed to a keen edge, or vice versa, M42 offers both for optimum performance you can count on.
*Extreme edge retention *Sharpens to a very keen edge *Professionally sharpened at Craft Supplies USA *Sharp and ready to use straight from the package *Made in the USA

The Robert Sorby® M2 HSS Bowl Gouge is easier to control and removes wood faster than spindle gouges. *6" Flute *M2 High-speed steel *Premium ash handle *Solid brass ferrule Robert Sorby® M2 high-speed steel turning tools have long been a popular line of woodturning tools. Still made in-house in Sheffield, England, their special attention to heat treating, material quality, and overall craftsmanship have made them one of the top choices in woodturning tools.

The Henry Taylor® Kryo™ Superflute Bowl Gouge is a superb tool and is very popular worldwide. Since its introduction in 1978, the Superflute Bowl Gouge has become the most popular bowl turning gouge ever. *6" Flute *Kryo™ cryogenically treated, triple-tempered steel *Lasts three to six times longer than M2 HSS *Premium ash handle *Distinctive black ferrule The choice of top professionals around the world, Henry Taylor® Kryo™ turning tools undergo a proprietary cryogenic treatment process that changes the molecular structure of M2 high-speed steel, which increases the steel's ability to hold an edge three to six times longer than standard M2 HSS tools. Unlike other brands of other cryogenically treated tools, only Henry Taylor® Kryo™ tools are triple-tempered to prevent chipping or breakage during use. In addition, all Kryo™ tools are hand-fitted with a properly sized and balanced ash handle for optimum fit and function.

The Hamlet M2 series of woodturning tools offer woodturners excellent quality and real value. This range of tools feature superb machining, finish and beautiful natural Ash handles. If you're looking for quality and value, you won't be disappointed. (6-7" flute)

The Henry Taylor® M2 HSS Superflute Bowl Gouge is a superb woodturning tool and is very popular worldwide. Since its introduction in 1978, the Superflute Bowl Gouge has become the most popular bowl turning gouge ever. *6" Flute *M2 High-speed steel *Premium ash handle *Solid brass ferrule Crafted in Sheffield, England for more than 150 years, Henry Taylor® M2 high-speed woodturning tools combine traditional forging techniques with state-of-the-art hardening and finishing processes to bring you the finest woodturning tools in the world. Henry Taylor® premium M2 high-speed steel tools go through rigorous testing to ensure proper hardness and edge-holding ability before being branded with the trusted Henry Taylor trademark. All tools are backed by our 100% satisfaction guarantee.

M42 Stay Sharp tools by Henry Taylor set a new standard for quality and performance in woodturning tools. Unlike other types of high speed/PM tool steel that sacrifice extreme edge retention for the ability to be honed to a keen edge, or vice versa, M42 Stay Sharp tools provide both for optimum performance you can count on. Made in England
*M42 ‘super steel’ for optimum edge holding ability *Can be honed to a razor sharp edge *Parabolic flute profile for easier sharpening and superb chip clearing *Double bevel grind for faster, cleaner cuts *Supplied with hand-polished stained beech handle *Sharp, ready to use out of the box

The Crown® Pro-PM Bowl Gouge is easy to control and removes wood faster than spindle gouges. *7-8" Flute *Powdered metallurgy *Premium wood handle Crown® Pro-PM tools feature advanced powdered metallurgy technology that's combined with traditional English craftsmanship resulting in top quality tools that hold an edge up to three times longer than M2 high-speed steel tools.

For the price of a single gouge, you can have a premium quality double-ended gouge that lasts twice as long. *Made of long lasting M4 high-speed steel *Double-ended for value and versatility *Fully adjustable to suit your needs *Saves time and money by allowing different grinds on each end *100% guaranteed *Oneway Mastercut Bowl Gouges are measured by the diameter of the round stock, not the flute width.
Specifications Overall length: 15-1/2"

The Robert Sorby® M2 HSS Fingernail Grind Bowl Gouge features a unique grind in which the corners of the gouge are ground back so they don't inadvertantly come in contact with the work that could cause a catch. *4-6" Flute *M2 High-speed steel *Premium ash handle *Solid brass ferrule Robert Sorby® M2 high-speed steel turning tools have long been a popular line of woodturning tools. Still made in-house in Sheffield, England, their special attention to heat treating, material quality, and overall craftsmanship have made them one of the top choices in woodturning tools.

The workhorse of turning tools for bowl turning, these gouges feature a parabolic flute profile that aids in fast, efficient cutting and superb chip clearing. *7-8" flute
Crown M42 Razor Edge tools are possibly the best M42 tools available at any price. Triple-temper heat treatment combined with cryogenic freezing gives them superior edge holding ability. Every Crown M42 Razor Edge tool comes with a beautiful black Ash handle with polished copper ferrule.

Designed for finishing cuts bowls and platters up to 14" in diameter, the M42 Bowl Finishing Scraper features a radiused cutting edge to minimize handle movement during transition cutting. Maximum reach over the tool should not exceed 2". *Blade: 7" x 3/4" x 5/16" *Handle length: 10" *Overall length: 17"
Crown M42 Razor Edge tools are possibly the best M42 tools available at any price. Triple-temper heat treatment combined with cryogenic freezing gives them superior edge holding ability. Every Crown M42 Razor Edge tool comes with a beautiful black Ash handle with polished copper ferrule.

Now available in long-lasting M42 high speed steel, the GL4 is used by Glenn primarily for the initial shaping of dry bowl blanks. The 55 degree double bevel grind combined with premium M42 tool steel provides fast wood removal, a fine finish and stays sharp longer. Highly recommended by Glenn for use as a general purpose bowl gouge. Made by Hamlet Craft Tools Sheffield, England. Detailed easy-to-follow sharpening instructions are included.
*Made from M42 ‘super steel’ for optimum edge holding ability *Can be honed to a razor sharp edge *Unsurpassed edge holding ability *Double bevel grind for faster, cleaner cutting *Parabolic flute profile for easier sharpening and superb chip clearing *Swept back profile with 55 degree double bevel grind *Perfect for finishing cuts on bottoms of bowls, end grain and high figured areas *Supplied with hand polished 16" natural Ash handle *Detailed sharpening instructions included. *Backed by 100% Satisfaction Guarantee
Specifications Blade: 5/8" dia. x 9-1/2" Flute: 1/2" x 7" long Overall length: 25"

The Carter and Son Toolworks U-Flute Bowl Gouge has a traditional U-shaped flute and square end grind. This style of bowl gouge performs particularly well on unseasoned wood due to the broader cutting edge that provides rapid wood removal and a wide U-shaped flute for superior chip clearing. U-Flute gouges are excellent for making fine finishing cuts and can also be reshaped to a swept back grind if desired.
Every U-flute bowl gouge is supplied with a hand ground swept-back profile and bevel angle as recommended by top professional instructors in our workshop program. This means every Carter and Son Toolworks bowl gouge will be razor sharp and user friendly to help you achieve maximum success.
*Easy to use profile and bevel angle *Provides rapid wood removal *Recommended for use with unseasoned wood *Hand ground by Craft Supplies USA professionals *Sold Unhandled Specifications: Blade measures: 5/8" dia. x 13" overall Flute measures: 3/8" x 7" Tang size: 5/8" dia.
M42 high speed steel is considered by many top turners to be the "holy grail" of tool steel for woodturning.  Unlike other types of high speed steel that sacrifice extreme edge retention for the ability to be honed to a keen edge, or vice versa, M42 offers both for optimum performance you can count on.
*Extreme edge retention *Sharpens to a very keen edge *Professionally sharpened at Craft Supplies USA *Sharp and ready to use straight from the package *Made in the USA

For less than the price of a single gouge, you can have a premium quality double-ended Glenn Lucas signature gouge that lasts twice as long. Made by Hamlet Craft Tools, Sheffield, England.
*To help you maintain the grind supplied on your GL4/GL6 double-ended gouge, detailed easy-to-follow sharpening instructions are included *Made of M2 high speed steel *Exceptional edge holding ability *Double-ended for value and versatility *Masterflute parabolic flute profile prevents clogging, improves chip clearing *Saves time and money by providing different grinds on each end *Fits most 5/8" modular tool handles including Oneway and Hosaluk *Does NOT fit Sorby Sovereign or Bosch Handles *Sharpening instructions included *Backed by 100% Satisfaction Guarantee Specifications: GL4 flute length: 8" GL6 flute length: 5-1/4" Overall tool measures: 15" Fits most 5/8" Modular Tool Handles. See above for exceptions
GL4 Bowl Gouge Section Used by Glenn primarily for the initial shaping of dry bowl blanks, the GL4 5/8" Bowl Gouge has a 55 degree double bevel signature grind for fast wood removal and fine finish. It also helps you maintain critical bevel contact when reaching down inside a bowl. Highly recommended by Glenn for use as a general purpose bowl gouge.
GL6 Bottom Finishing Gouge Section The GL6 Bottom Finishing Gouge is designed specifically for making bottoming cuts on bowls, and cutting high figured and end grain wood. The square-end profile with double bevel grind produces an exceptionally clean cut with little or no tear-out.

Now available in long-lasting M42 high speed steel, the GL5S 3/8" Finishing Bowl Gouge is designed for making fine finishing cuts on the inside and outside of bowls and platters. The swept back grind with 45 degree double bevel makes push cuts and dragging shear cuts a breeze while leaving an exceptionally fine surface. Made by Hamlet Craft Tools, Sheffield, England. Detailed easy-to-follow sharpening instructions are included.
*Made from M42 ‘super steel’ for optimum edge holding ability *Can be honed to a razor sharp edge *Unsurpassed edge holding ability *Parabolic flute profile for easier sharpening and superb chip clearing *Swept back profile with 45 degree double bevel grind *Double bevel grind for faster, cleaner cutting *Perfect for push/pull cuts *Leaves an exceptionally fine finish *Supplied with hand polished 16" natural Ash handle *Detailed sharpening instructions included. *Backed by 100% Satisfaction Guarantee
Specifications Blade: 3/8" dia. x 9-1/2" Flute: 3/8" x 7" Overall length: 23"

Now available in long-lasting M42 high speed steel, the GL5 1/2" Finishing Bowl Gouge is designed for making fine finishing cuts on the inside and outside of bowls and platters. The swept back grind with 45 degree double bevel makes push cuts and dragging shear cuts a breeze while leaving an exceptionally fine surface. Made by Hamlet Craft Tools, Sheffield, England. Detailed easy-to-follow sharpening instructions are included.
*Made from M42 ‘super steel’ for optimum edge holding ability *Can be honed to a razor sharp edge *Unsurpassed edge holding ability *Parabolic flute profile for easier sharpening and superb chip clearing *Swept back profile with 45 degree double bevel grind *Double bevel grind for faster, cleaner cutting *Perfect for push/pull cuts *Leaves an exceptionally fine finish *Supplied with hand polished 16" natural Ash handle *Detailed sharpening instructions included. *Backed by 100% Satisfaction Guarantee
Specifications Blade: 1/2" dia. x 9-1/2" Flute: 1/2" x 7" long Overall length: 25"

For the less than the price of a single gouge, you can have a premium quality double- ended Glenn Lucas signature gouge that lasts twice as long. Made by Hamlet Craft Tools, Sheffield, England.
To help you maintain the grind supplied on your GL5/GL7 double-ended gouge, detailed easy-to-follow sharpening instructions are included.
*Made of M2 high speed steel *Double-ended for value and versatility *Masterflute profile prevents clogging, improves chip clearing *Saves time and money by providing different grinds on each end *Flute measures 3/8" wide *Sharpening instructions included *Fits 1/2" Modular Tool Handles *Available exclusively from Craft Supplies USA *Backed by 100% Satisfaction Guarantee Specifications: GL5 flute length: 7-1/2" GL7 flute length: 5" Overall tool measures: 14-5/8" Fits 1/2" Modular Tool Handles
GL5 Finishing Bowl Gouge
The GL5 1/2" Finishing Bowl Gouge is designed for making fine finishing cuts on the inside and outside of bowls and platters. The swept back grind with 45 degree double bevel makes push cuts and dragging shear cuts a breeze while leaving an exceptionally fine surface.
GL7 Detail Spindle Gouge
GL7 Detail Spindle Gouge is supplied with a long point and swept back grind that allows you to make fine detail cuts and access hard to reach areas on all types of work including shallow bowls, boxes, pens and other small projects. It’s also perfect for cutting small detail and decorative lines on larger bowls and platters.

Ideal for tissue-thin clean up cuts to eliminate gouge irregularities in the lower half of a bowl. *6" Blade *1" Wide *M2 High-speed steel *Premium ash handle *Solid brass ferrule Crafted in Sheffield, England for more than 150 years, Henry Taylor® M2 high-speed woodturning tools combine traditional forging techniques with state-of-the-art hardening and finishing processes to bring you the finest woodturning tools in the world. Henry Taylor® premium M2 high-speed steel tools go through rigorous testing to ensure proper hardness and edge-holding ability before being branded with the trusted Henry Taylor trademark. All tools are backed by our 100% satisfaction guarantee.

Designed specifically for finishing the bottom interior of bowls, the Artisan® Bottoming Gouge features a special bevel shape that’s ground to 55º so you can make a finishing cut on the bottom interior of deeper bowls without risk of the tool shaft contacting the rim of bowl. *Short 4-3/4" flute for added strength and longer reach *M2 High speed steel *Solid Ash handle with heavy brass ferrule *Blade measures: 5/8" outside diameter *Overall length: 26" Artisan® woodturning tools provide an economical alternative to other more expensive high-speed steel tools without sacrificing quality or performance. Though not as highly polished as standard Henry Taylor tools, Artisan® tools are made of the same top quality heat-treated M2 high-speed steel and premium ash handles as standard Henry Taylor tools, but at a lower price.

Available exclusively from Craft Supplies USA, the Carter and Son Toolworks Radius Scraper features an asymmetric round nose that is highly effective for improving the internal surfaces of bowls and platters. It is equally effective on end grain projects like boxes, goblets, and scoops.
Its heavy 3/8" thick cross section and 3/4" dia. tang dampens vibration and provides stability while the premium M42 high speed steel provides unparalleled edge holding ability.
*Perfect for final shaping on bowls and platters *Easy to control when making light cuts *Profile works on most shapes and contours *Heavy blade cross section eliminates vibration *Sold Unhandled Specifications: Blade: 6-1/2" x 1" x 3/8" Tang: 3/4" dia. x 2-3/4" long
M42 high speed steel is considered by many top turners to be the "holy grail" of tool steel for woodturning.  Unlike other types of high speed steel that sacrifice extreme edge retention for the ability to be honed to a keen edge, or vice versa, M42 offers both for optimum performance you can count on.
*Extreme edge retention *Sharpens to a very keen edge *Professionally sharpened at Craft Supplies USA *Sharp and ready to use straight from the package *Made in the USA

Now available in long-lasting M42 high speed steel, the GL6 Bottom Finishing Gouge is designed specifically for making bottoming cuts on bowls and cutting high figured and end grain wood. The square-end profile with double bevel grind produces an exceptionally clean cut with little or no tear-out. Made by Hamlet Craft Tools, Sheffield, England. Detailed easy-to-follow sharpening instructions are included.
*Made from M42 ‘super steel’ for optimum edge holding ability *Can be honed to a razor sharp edge *Unsurpassed edge holding ability *Parabolic flute profile for easier sharpening and superb chip clearing *Double bevel grind for faster, cleaner cutting *Short 4" flute for added strength and extra reach over the tool rest *Square end profile with 55 degree double bevel grind *Perfect for finishing cuts on bottoms of bowls, end grain and high figured areas *Supplied with hand polished 16" natural Ash handle *Detailed sharpening instructions included. *Backed by 100% Satisfaction Guarantee
Specifications Blade: 5/8" dia. x 9-1/2 long Flute: 1/2" x 4" long Overall length: 25"

These tools provide the mass and rigidity to dampen vibration and produce a clean finish. The heavy 3/8" cross section and 1-1/2" width allow you to reach further over the tool rest while producing a smooth finish on all types of wood complements of the negative rake cutting edge. Supplied with a heavy duty 17" Ash handle. 27" overall length. *Blade: 3/8" thick, 1-1/2" wide x 6-1/2" long *M2 High-speed steel *Premium ash handle *Solid brass ferrule Crafted in Sheffield, England for more than 150 years, Henry Taylor® M2 high-speed woodturning tools combine traditional forging techniques with state-of-the-art hardening and finishing processes to bring you the finest woodturning tools in the world. Henry Taylor® premium M2 high-speed steel tools go through rigorous testing to ensure proper hardness and edge-holding ability before being branded with the trusted Henry Taylor trademark. All tools are backed by our 100% satisfaction guarantee.

These tools provide the mass and rigidity to dampen vibration and produce a clean finish. The heavy 3/8" cross section and 1-1/2" width allow you to reach further over the tool rest while producing a smooth finish on all types of wood complements of the negative rake cutting edge. Supplied with a heavy duty 17" Ash handle. 27" overall length. *Blade: 3/8" thick, 1-1/2" wide x 6-1/2" long *M2 High-speed steel *Premium ash handle *Solid brass ferrule Crafted in Sheffield, England for more than 150 years, Henry Taylor® M2 high-speed woodturning tools combine traditional forging techniques with state-of-the-art hardening and finishing processes to bring you the finest woodturning tools in the world. Henry Taylor® premium M2 high-speed steel tools go through rigorous testing to ensure proper hardness and edge-holding ability before being branded with the trusted Henry Taylor trademark. All tools are backed by our 100% satisfaction guarantee.

The Crown Negative Rake Shear Scraper combines the unique advantages of a negative rake scraper and the ability to create fine shearing cuts into a single, user-friendly tool that’s economical and versatile.
The Crown Negative Rake Shear Scraper features an adjustable cryogenically treated high-speed steel cutter mounted on a sturdy 5/8" diameter round shaft at a negative rake angle. The round tool shank makes rolling the tool side to side when making shearing cuts smooth and effortless. It can also be used to make standard scraping cuts by holding the tool in a traditional scraping position.
Regardless of the type of cut, the Crown Negative Rake Shear Scraper helps you remove small tool marks and achieve a silky smooth surface with little or no tear-out on dense materials, exotic woods, and end grain areas too. Instructions included.
*Fully adjustable cutter system *Cryogenically treated high-speed steel cutter *Negative rake cutter angle for clean tear-free cuts *Round shank design for smooth side-to-side transition *Can be used for making standard scraping cuts *Ideal for making shear-scraping cuts *Highly recommended for use on exotic and hard woods *Produces smooth finish with little or no tear-out *Supplied with genuine beech handle
Tool specifications: Cutter size: 7/8" x 1-29/64" Shaft length: 7" Shaft diameter: 5/8" Handle length: 12-1/2" Overall tool length: 19-1/2"
Note: In order to achieve the best possible results, it’s essential that the cutter have a burr on the cutting edge because the burr does the cutting. When the burr is gone, the cutter is dull and should be sharpened to create a fresh burr edge. This can be done with the cutter still mounted on the tool by sharpening the cutter on a grinder or honing the edge of the cutter by hand using a CBN or diamond hone. When there is a burr on the edge of the cutter, you’re ready to go.
*Read the how-to article

These tools provide the mass and rigidity to dampen vibration and produce a clean finish. The heavy 3/8" cross section and 1-1/2" width allow you to reach further over the tool rest while producing a smooth finish on all types of wood complements of the negative rake cutting edge. Supplied with a heavy duty 17" Ash handle. 27" overall length. *Blade: 3/8" thick, 1-1/2" wide x 6-1/2" long *M2 High-speed steel *Premium ash handle *Solid brass ferrule Crafted in Sheffield, England for more than 150 years, Henry Taylor® M2 high-speed woodturning tools combine traditional forging techniques with state-of-the-art hardening and finishing processes to bring you the finest woodturning tools in the world. Henry Taylor® premium M2 high-speed steel tools go through rigorous testing to ensure proper hardness and edge-holding ability before being branded with the trusted Henry Taylor trademark. All tools are backed by our 100% satisfaction guarantee.

These extra heavy round point scrapers feature a negative rake profile to reduce tear-out, eliminate the tendency to self-feed and improve controllability. The 3/8" thick cross-section eliminates vibration and chatter while inspiring confidence with it’s overall solid feel. Every scraper is made of M2 high-speed steel and has been hardened to 60-62 Rockwell for toughness and durability. *6" Blade *M2 High-speed steel *Premium ash handle *Solid brass ferrule Crafted in Sheffield, England for more than 150 years, Henry Taylor® M2 high-speed woodturning tools combine traditional forging techniques with state-of-the-art hardening and finishing processes to bring you the finest woodturning tools in the world. Henry Taylor® premium M2 high-speed steel tools go through rigorous testing to ensure proper hardness and edge-holding ability before being branded with the trusted Henry Taylor trademark. All tools are backed by our 100% satisfaction guarantee.

This extra heavy square point scraper features a negative rake profile to reduce tear-out, eliminate the tendency to self-feed and improve controllability. The 3/8" thick cross-section eliminates vibration and chatter while inspiring confidence with it’s overall solid feel. Every scraper is made of M2 high-speed steel and has been hardened to 60-62 Rockwell for toughness and durability. *6" Blade *M2 High-speed steel *Premium ash handle *Solid brass ferrule Crafted in Sheffield, England for more than 150 years, Henry Taylor® M2 high-speed woodturning tools combine traditional forging techniques with state-of-the-art hardening and finishing processes to bring you the finest woodturning tools in the world. Henry Taylor® premium M2 high-speed steel tools go through rigorous testing to ensure proper hardness and edge-holding ability before being branded with the trusted Henry Taylor trademark. All tools are backed by our 100% satisfaction guarantee.

Replacement Cutter for the Crown Negative Rake Shear Scraper.
In order to achieve the best possible results, it’s essential that the cutter have a burr on the cutting edge because the burr does the cutting. When the burr is gone, the cutter is dull and should be sharpened to create a fresh burr edge. This can be done with the cutter still mounted on the tool by sharpening the cutter on a grinder or honing the edge of the cutter by hand using a CBN or diamond hone. When there is a burr on the edge of the cutter, you’re ready to go.

Now available in long-lasting M42 high speed steel, the GL7 1/2" Spindle Gouge is a versatile general purpose gouge that’s ideal for spindle turning, box making producing decorative details on bowls and more. Made by Hamlet Craft Tools, Sheffield, England. Detailed easy-to-follow sharpening instructions are included.
*Made from M42 ‘super steel’ for optimum edge holding ability *Can be honed to a razor sharp edge *Unsurpassed edge holding ability *Parabolic flute profile for easier sharpening and superb chip clearing *Double bevel grind for faster, cleaner cutting *Supplied with beautiful 10" natural Ash handle *Detailed sharpening instructions included. *Backed by 100% Satisfaction Guarantee
Specifications Blade: 1/2" dia. x 6" long Flute: 4" Overall length: 16"

The 1" Negative Rake Scraper by Carter and Son Toolworks is a superb scraping tool made from M42 high speed steel for optimum edge holding ability and its ability to be sharpened to a keen edge.
Negative rake scrapers are superior to traditional scrapers because of their ability to produce a clean finishing cut on end-grain, hard and high-figured woods as well as stabilized wood and plastics. The negative rake angle on the Negative Rake Scraper by Carter and Son makes it non-aggressive and easy to control when making heavy or light cuts without the risk of a catch which is common when using standard scrapers.
Specifications: Blade measures: 1" wide by 3/8" thick Overall blade length: 9-1/2" Tang size: 3/4" dia.
The Mahoney range of M42 tools are the result of Mike's constant effort to improve efficiency and reduce production time. Every Mahoney tool is designed to help you produce maximum results in a minimal amount of time. Manufactured to Mike's exact specifications by Carter and Son's Toolworks, each tool is identical to those used by Mike in his workshop.

Now available in long-lasting M42 high speed steel, the GL7 3/8" Spindle Gouge is a versatile general purpose gouge that’s ideal for spindle turning, box making producing decorative details on bowls and more. Made by Hamlet Craft Tools, Sheffield, England. Detailed easy-to-follow sharpening instructions are included.
*Made from M42 ‘super steel’ for optimum edge holding ability *Can be honed to a razor sharp edge *Unsurpassed edge holding ability *Parabolic flute profile for easier sharpening and superb chip clearing *Double bevel grind for faster, cleaner cutting *Supplied with beautiful 10" natural beech hardwood handle *Detailed sharpening instructions included. *Backed by 100% Satisfaction Guarantee
Specifications Blade: 3/8" dia. x 6" long Flute: 4" long Overall length: 16"

Learn how to turn with the Ellsworth Signature Bowl Gouge, how to sharpen it and more with the Crown® Pro-PM Ellsworth Signature Bowl Gouge Combo Kit.
Includes: *Crown® Pro-PM Ellsworth 1/2" Signature Bowl Gouge *Ellsworth Signature Bowl Gouge Grinding Jig *Ellsworth Signature Bowl Gouge Instructional DVD

Used by Glenn primarily for the initial shaping of dry bowl blanks, the GL4 5/8" Bowl Gouge has a 55 degree double bevel signature grind for fast wood removal and fine finish. It also helps you maintain critical bevel contact when reaching down inside a bowl. Highly recommended by Glenn for use as a general purpose bowl gouge. Made by Hamlet Craft Tools, Sheffield, England. To help you maintain the grind supplied on your GL4 gouge, detailed easy-to-follow sharpening instructions are included. *Made from M2 high speed steel *Excellent edge holding ability *Can be honed to a razor sharp edge *Double bevel grind for faster, cleaner cutting *Parabolic flute profile for easier sharpening and superb chip clearing *Swept back profile with 55 degree double bevel grind *Perfect for finishing cuts on bottoms of bowls, end grain and high figured areas *Supplied with beautiful 16" stained beech hardwood handle *Detailed sharpening instructions included. *Backed by 100% Satisfaction Guarantee
Specifications Blade: 5/8" dia. x 9-1/2" Flute: 1/2" x 7" long Overall length: 25"

by Dick Sing Internationally known woodturner Dick Sing leads you through all the steps needed to create beautiful bowls. Using clear, step-by-step instructions and over 350 photographs, Dick describes turning bowls ranging from basic to advanced, including a "natural top" bowl, in which the bowl's rim incorporates actual bark from the tree. You will learn how to prepare the wood, rough out a bowl before drying, and select the most appropriate equipment for turning. Dick demonstrates the proper use of bowl gouges, scrapers, and other tools needed for each step. Sanding and finishing techniques are covered as well. Finally, the gallery includes a wonderful selection of bowls in different woods and styles to inspire ongoing work. Hone your woodturning skills while producing elegant bowls you will be proud of. *80 pages *Soft Cover

The GL5 1/2" Finishing Bowl Gouge is designed for making fine finishing cuts on the inside and outside of bowls and platters. The swept back grind with 45 degree double bevel makes push cuts and dragging shear cuts a breeze while leaving an exceptionally fine surface. Made by Hamlet Craft Tools, Sheffield, England. Detailed easy-to-follow sharpening instructions are included. *Made from M2 high speed steel *Can be honed to a razor sharp edge *Excellent edge holding ability *Parabolic flute profile for easier sharpening and superb chip clearing *Swept back profile with 45 degree double bevel grind *Double bevel grind for faster, cleaner cutting *Perfect for push/pull cuts *Leaves an exceptionally fine finish *Supplied with hand polished 16" natural Ash handle *Detailed sharpening instructions included. *Backed by 100% Satisfaction Guarantee
Specifications Blade: 3/8" dia. x 9-1/2" Flute: 3/8" x 7" Overall length: 23"

The GL3 3/4" Bowl Roughing Gouge is designed for fast, efficient rough shaping of unseasoned wood. The 55 degree, double bevel signature grind and massive 3/4" diameter shaft with short flute help you get the wood off fast without vibration. Made by Hamlet Craft Tools, Sheffield, England. To help you maintain the grind supplied on your GL3 gouge, detailed easy-to-follow sharpening instructions are included. *Made of M2 high speed steel *Masterflute profile prevents clogging, improves chip clearing *55 Degree double bevel grind for optimum bevel contact *Shorter flute for added strength and extra reach over the tool rest *Detailed sharpening instructions included *Available exclusively from Craft Supplies USA *Backed by 100% Satisfaction Guarantee
Specifications Blade: 3/4" dia. x 9-1/2" Flute: 1/2" x 6" Overall length: 23"

The Oneway® Bowl Steady is designed to eliminate vibration by supporting the work area when cutting. This eliminates the tendency for dig-ins and results in cleaner cuts and improved safety. The Bowl Steady can be used for all types of turning where vibration occurs. Infinite vertical and horizontal adjustment, along with tensioning arms, allow you to create the perfect amount of pressure against the work. The Bowl Steady requires some assembly prior to use. 15 lbs.
To determine clamp block size: measure the distance between the rails on your lathe bed.

The Low Profile Spindle Gouge by Carter and Son Toolworks is a superb tool made from M42 high speed steel for optimum edge holding ability and it’s ability to be sharpened to a keen edge.
The low-profile design is very similar to traditional "European style" spindle gouges. With the sides of the tool milled away and the flute cut deeper into the blade, the low-profile design allows you to make deep detail cuts without the sides of the tool interfering. And, because the cutting edge is below the center of the tool, tool control is improved and shavings clear faster while cutting. Made in USA.
*Improved control when doing detail work *Cutting edge below center of tool for improved handling *Made from M42 HSS, the "holy grail" of tool steel *Extreme edge holding ability *Can be honed to a keen edge *Hardened to 68 HRC *Hand ground by Craft Supplies USA professionals *Sold Unhandled *Made in USA Specifications (3/8") Blade measures: 3/8" dia. x 8" overall Useable flute: 3" long Tang size: 3/8" dia
Specifications (1/2") Blade measures: 1/2" dia. x 8" overall Useable flute: 3" long Tang size: 1/2" dia.
Specifications (3/4") Blade measures: 3/4" dia. x 8" overall Useable flute: 3-1/2" long Tang size: 5/8" dia.
Specifications (5/8") Blade measures: 5/8" dia. x 8" overall Useable flute: 3-1/2" long Tang size: 5/8" dia

Few tools in the shop can save you time and money like the Kelton® Standard McNaughton Center Saver System. Instead of peeling away 90% of a bowl blank into useless shavings, you can create several bowls from a single blank. In fact, a 16" x 6" thick bowl blank can yield four or more bowls depending on your experience and skill level. Bowl coring reduces the cost per bowl and the cored bowls take less time to turn and finish. Bowl coring is great for the environment as it maximizes yield and reduces waste.
Unlike other fixed position bowl coring systems that cut predetermined shapes, the McNaughton Center Saver System lets you vary the shape, thickness, and diameter of cored bowls via the newly redesigned articulating tool support post.
*Designed to core bowls 15" in diameter and smaller Includes: 3 curved blades Mark 8 tool support assembly with 1" dia. post 10" handle

The Robert Sorby® M2 HSS Square Point Scraper allows you to easily create flat surfaces on spindles and the inside of boxes and bowls. *6" Blade *M2 High-speed steel *Premium ash handle *Solid brass ferrule Robert Sorby® M2 high-speed steel turning tools have long been a popular line of woodturning tools. Still made in-house in Sheffield, England, their special attention to heat treating, material quality, and overall craftsmanship have made them one of the top choices in woodturning tools.

The Crown® Pro-PM Round Point Scraper features a round profile that makes it ideal for general purpose scraping and for smoothing rough areas on spindles and bowls. *6-1/2" Blade *3/4" Wide *Powdered metallurgy *Premium wood handle Crown® Pro-PM tools feature advanced powdered metallurgy technology that's combined with traditional English craftsmanship resulting in top quality tools that hold an edge up to three times longer than M2 high-speed steel tools.

Few tools in the shop can save you time and money like the Kelton® Jumbo McNaughton Center Saver System. Instead of peeling away 90% of a bowl blank into useless shavings, you can create several bowls from a single blank. In fact, a 16" x 6" thick bowl blank can yield four or more bowls depending on your experience and skill level. Bowl coring reduces the cost per bowl and the cored bowls take less time to turn and finish. Bowl coring is great for the environment as it maximizes yield and reduces waste.
Unlike other fixed position bowl coring systems that cut predetermined shapes, the McNaughton Center Saver System lets you vary the shape, thickness, and diameter of cored bowls via the newly redesigned articulating tool support post.
*Combination of the Jumbo and Standard Center Saver systems Includes: 2 jumbo curved blades 3 standard curved blades Mark 8 tool support assembly with 1" dia. post 10" handle.

The Robert Sorby® M2 HSS Extra Heavy Radiused Inboard Scraper features a heavy duty design that dampens vibration and allows for longer reach over the tool rest and is ideal for shaping bowls and making fine clean-up cuts. *7-8" Blade *1-1/2" Wide *M2 High-speed steel *Premium ash handle *Solid brass ferrule Robert Sorby® M2 high-speed steel turning tools have long been a popular line of woodturning tools. Still made in-house in Sheffield, England, their special attention to heat treating, material quality, and overall craftsmanship have made them one of the top choices in woodturning tools.

Designed for use with the Kelton® McNaughton Center Saver System, the Kelton® McNaughton Center Saver Mini Blade easily cores bowls in no time. *Designed for coring bowls 10" in diameter and smaller

The Robert Sorby® M2 HSS Curved Scraper features a curved end profile, which makes it excellent for creating, smoothing, and blending curved surfaces in bowls and spindle work. *6" Blade *3/4" Wide *M2 High-speed steel *Premium ash handle *Solid brass ferrule Robert Sorby® M2 high-speed steel turning tools have long been a popular line of woodturning tools. Still made in-house in Sheffield, England, their special attention to heat treating, material quality, and overall craftsmanship have made them one of the top choices in woodturning tools.

The Henry Taylor® M2 HSS Detail Gouge features a long, fingernail point with a shallow flute and heavy cross section to eliminate vibration and is ideal for fine detail work on bowls and spindles. *8" Flute *1/2" Wide *M2 High-speed steel *Premium ash handle *Solid brass ferrule Crafted in Sheffield, England for more than 150 years, Henry Taylor® M2 high-speed woodturning tools combine traditional forging techniques with state-of-the-art hardening and finishing processes to bring you the finest woodturning tools in the world. Henry Taylor® premium M2 high-speed steel tools go through rigorous testing to ensure proper hardness and edge-holding ability before being branded with the trusted Henry Taylor trademark. All tools are backed by our 100% satisfaction guarantee.

The Henry Taylor® M2 HSS Square Point Negative Rake Scraper allows you to easily create flat surfaces on spindles and the inside of boxes and bowls. *6" Blade *M2 High-speed steel *Premium ash handle *Solid brass ferrule Crafted in Sheffield, England for more than 150 years, Henry Taylor® M2 high-speed woodturning tools combine traditional forging techniques with state-of-the-art hardening and finishing processes to bring you the finest woodturning tools in the world. Henry Taylor® premium M2 high-speed steel tools go through rigorous testing to ensure proper hardness and edge-holding ability before being branded with the trusted Henry Taylor trademark. All tools are backed by our 100% satisfaction guarantee.

Designed for use with the Kelton® Standard McNaughton Center Saver System, the Kelton® McNaughton Center Saver Standard Blade easily cores bowls in no time. *Designed for coring bowls 15" in diameter and smaller

The Henry Taylor® Kryo™ Detail Gouge features a long, fingernail point with a shallow flute and heavy cross section that eliminates vibration, making it ideal for fine detail work on bowls and spindles. *8" Flute *9-3/4" Blade *1/2" Wide *Kryo™ cryogenically treated, triple-tempered steel *Lasts three to six times longer than M2 HSS *Premium ash handle *Distinctive black ferrule The choice of top professionals around the world, Henry Taylor® Kryo™ turning tools undergo a proprietary cryogenic treatment process that changes the molecular structure of M2 high-speed steel, which increases the steel's ability to hold an edge three to six times longer than standard M2 HSS tools. Unlike other brands of other cryogenically treated tools, only Henry Taylor® Kryo™ tools are triple-tempered to prevent chipping or breakage during use. In addition, all Kryo™ tools are hand-fitted with a properly sized and balanced ash handle for optimum fit and function.

The Robert Sorby® M2 HSS Extra Heavy Full Round Scraper features a heavy duty design that dampens vibration and allows for longer reach over the tool rest and is ideal for shaping bowls and making fine clean-up cuts. *7-8" Blade *1-1/2" Wide *M2 High-speed steel *Premium ash handle *Solid brass ferrule Robert Sorby® M2 high-speed steel turning tools have long been a popular line of woodturning tools. Still made in-house in Sheffield, England, their special attention to heat treating, material quality, and overall craftsmanship have made them one of the top choices in woodturning tools.