Artisan Signature Rollerball Pen Kit

Artisan Signature Rollerball Pen Kit
  • View Larger
  • Multiple Views

    Customer rating on this product:

    Read reviews ( 3 ) | Write a review

    Artisan Signature Rollerball Pen Kit

    Part# 1041660001 | Mfg Part# RL101

    Our Price: $8.95

    (See Qty. Pricing Below)View Product Details

    5+ In-Stock

    Quantity pricing:

    10-19$8.05You Save 10%
    20-49$7.61You Save 15%
    50-99$7.16You Save 20%
    100+$6.71You Save 25%
    Live Help
    • Customer service is our top priority at Craft Supplies USA. We take great pride in providing our valued customers with unrivaled service, top quality products, and hassle-free returns. We make every effort to make sure your experience is so good that you're eager to do business with us again.

    • 100% Satisfaction Guarantee

      Our guarantee is simple… if for any reason you're not completely satisfied with any product, you can return it for a prompt refund or replacement. No Risk, No Hassles, Guaranteed.

    • Quality Products

      We do our very best to offer the quality products available. We carefully evaluate every product for quality, performance and value before we make it available to you, our valued customer. If a product doesn't meet our standards, we won't offer it, period.

    • Have questions?

      Live chat: Click Here (Leave email if after hours)
      Call us: 1 800 551-8876
      7am–6pm Mountain Time, Monday–Friday


      The slender design and exceptional balance of the Artisan® Signature Rollerball Pen make writing a pure pleasure. The pen cap snaps firmly into place to prevent drying when not in use and will also attach to the base when writing.
    • 10k Gold plating
    • Quality rollerball refill
    • Snap cap design

    • Specifications:
      Finished size: 7/16" x 5-5/8"
      Minimum blank size: 3/4" x 3/4" x 5"

      Rollerball ink refill
      Pen components (blank not included)

      Items needed to complete:
      Drill bit: 10mm
      Bushings: Artisan® Signature Rollerball/Fountain Pen Bushings
      7mm Pen mandrel
      Barrel trimmer head
      Pilot shaft: 10mm

      Replacement items:
      Ink refill: Rollerball
      Brass tubes: Artisan® Signature Rollerball/Fountain Pen Tube Set
      Components (if available): Call (800) 551-8876
    WARNING: Cancer and Reproductive Harm -
    0 of 0 people found this review helpful.

    Very poor design

    Comments On Dec 13, 2016:I purchased one of these kits by accident. When I realized I didn't have the bushings, I ordered another one as well as the proper bushings. I should have read the other reviews before purchasing. You have to file a notch to allow the clip to seat properly. The top also doesn't have a ring or any other component attached so it leaves the end of the tube and wood exposed as you assemble the pen. Read the instructions and you'll see what I mean. This is one model that won't make it into my inventory.

    Was this review helpful?

    4 of 4 people found this review helpful.

    Some aggravating design choices, but pretty.

    Comments On Aug 16, 2016:What's really nice about this pen kit is it is much more slim than some of the other rollerball options and looks nice when finished. It's also a big plus that it only requires one size bit, which cuts back on prep time over some of the other rollerball options.
    Unfortunately there are a couple of nagging issues with the design. First you have to cut out a notch in the cap for the clip. This notch has to go all the way through the wood and the brass tube and should be done with something you can control precisely like a thin file. That takes some time to do well without leaving a gap.
    Second the retention for the cap is a piece of plastic you have to install and adjust with a phillips head screwdriver. You will not be able to put a ratcheting bit driver down the tube by the way so make sure you have a real screwdriver handy. Also be careful when doing so so you don't strip the part that the screwdriver grabs onto, which you can do by say using a slot screwdriver instead of a phillips.
    Finally the issue which the most aggravating to me is there is nothing on the underside of the cap, which lets the customer see bare wood and the tube, along with any index marks you might have left. Other kits like the Jr Gentlemen's have a press in piece that avoids this and gives a better look to the cap. Overall I think I will use other kits in the future unless someone specifically requests something this slim.

    Was this review helpful?

    1 of 1 people found this review helpful.

    Love this pen, but a challenge to build

    Comments On Apr 24, 2015:I've made 3 of these pens. Its a very elegant and stylish looking pen but as a relative new comer to this hobby, it's a bit of a challenge. The body is easy enough, but the cap requires one to file or dremmel a notch at the top of the cap/clip for the clip to fit. you then have to use a tool to adjust the nib cap to get it to close properly. A # 1 phillips will work, but the only one I had was a bit on the end of a precision screw driver set and it managed to get stuck inside the cap. Had to re-assemble and start again. Perhaps this is why I like the pen so much. Real sense of satisfaction when it all comes together. Very helpful assistance from Craft Supply techs.

    Was this review helpful?