Expand
Turners Select No-Lock Spindle Washer
- View Larger
- Multiple Views
- Video
Customer rating on this product:
No-Lock Spindle Washer
Details
- Have you ever had your chuck or faceplate get stuck on your lathe spindle? We have the solution. Our team has developed the Turners Select™ No-Lock Spindle Washer using a special DuPont® plastic that will prevent your chuck from ever getting stuck again. The No-Lock spindle washer is highly resistant to wear and abrasion giving you years of dependable service unlike pressed-fiber washers. Give these washers a try, you'll wonder how you ever turned without them.
0 of 0 people found this review helpful.
Mine caused Wobble
Kirk in MT
Comments On Jul 19, 2020:I tried one of these on a Jet 1015 lathe. It worked great as far as making it easier to get the Nova G3 chuck off after use. The chuck ran true without the washer, but was noticeably off axis with the washer. So I threw it away.
Was this review helpful?
2 of 2 people found this review helpful.
A must have
TODD in CO
Comments On Sep 29, 2018:A must have to keep your chuck easier to unscrew from the spindle. Nothing more frustrating than having a chuck seized up really tight on your spindle. But when you buy, buy two or three of these. Always nice to have a spare (when they fall off they land right in your pile of shavings). :-)
Was this review helpful?
0 of 0 people found this review helpful.
didn't work for me
DAVE in AR
Comments On May 02, 2018:didn't work for me. couldn't tell any difference
Was this review helpful?
1 of 1 people found this review helpful.
Makes life so much easier
Ray in IN
Comments On Jan 23, 2017:Never knew that I needed one but I tried it on a whim and cannot believe how great it works. All of my chucks and face plates can be removed with nothing that a turn of the hand.
Was this review helpful?
1 of 1 people found this review helpful.
"Why Wash Your Spindle?"
Donald in WA
Comments On Oct 12, 2016:This washer keeps your chuck from locking on your lathe spindle. I use it all the time. Stuart Batty has said that using a washer can possibly add vibration to the mix; however, I would rather deal with the possibility of vibration than having a chuck stuck on my spindle. But that's just me.
Was this review helpful?
1 of 1 people found this review helpful.
Does the job
Jay in AZ
Comments On Apr 24, 2016:My chuck was always getting stuck on the lathe. I just happened to see these when putting in an order and picked one up. Problem solved! It does exactly what it's supposed to do.
Was this review helpful?
1 of 1 people found this review helpful.
Great lathe addition
Jimmy in WY
Comments On Jan 13, 2016:It's a very simple washer, however it really makes it easy to change out chucks and face plates with it in place.
Was this review helpful?
1 of 1 people found this review helpful.
Purchased as a spare
Butch in WI
Comments On Apr 02, 2015:Purchased this for a spare, glad I did. Didn't notice one stuck to the chuck and fell to the dust collection which didn't do it any good. Put on the new one and hasn't come off since.
Was this review helpful?
1 of 1 people found this review helpful.
I can dig it
Miles in MI
Comments On Dec 25, 2014:For such a simple thing it works exactly as advertised and is nice to have.
Was this review helpful?
1 of 1 people found this review helpful.
Simple, elegant solution
MIKE in WA
Comments On Dec 29, 2014:These simple washers eliminate the need for wrenches to unstick a chuck. Suggest buying a spare as they wear out in a few months if you change chucks frequently.
Was this review helpful?
0 of 0 people found this review helpful.
good product
JIM in OH
Comments On Dec 29, 2014:This does make removing a Chuck easier. Well worth the little cost.
Was this review helpful?
2 of 2 people found this review helpful.
No-Lock Spindle Washer
Michael in WA
Comments On May 18, 2014:My Talon chuck did not quite reach the drive shoulder of my Jet lathe, so the chuck would wobble. Two of these washers lets the chuck seat firmly against the shoulder and now it runs true.
Was this review helpful?
0 of 0 people found this review helpful.
Washer Eases Chuck Removal
Richard in MI
Comments On Jan 03, 2014:I had diffiulty removing my chuck prior to purchasing and using this washer. The washer really keeps the chuck from getting jammed and having to use a lot of force to remove the chuck.
Also,I bought two, but only one was shipped. Craft Supply was very good about sending the second washer free of charge.
Was this review helpful?
1 of 1 people found this review helpful.
Victor in TN
Comments On Dec 15, 2013:These are great and inexpensive and they seem to stay on the lathe better.
Was this review helpful?
1 of 1 people found this review helpful.
Simple item, but worth every penny!
Robert in CA
Comments On Oct 03, 2013:I honestly didn't even realize that I needed the no-lock spindle washer, but once I'd installed it, I immediately realized its value. I compared the difference between removing the chuck with, and without the washer, and I dont beleive that I will ever again attach a device to my threaded spindle without the no-lock washer!
Was this review helpful?
0 of 0 people found this review helpful.
Spindle Washer
Scott in ME
Comments On Jun 20, 2013:Works great, chuck spins right off, no sticking
Was this review helpful?
3 of 3 people found this review helpful.
life is easy now when you want to change chucks
DR. TAREK in
Comments On Jan 21, 2013:This has made my life very easy as I do not need the tools now to change the chucks. I have only five chucks but some time I have more than one project at any one time and I do not like to remove the items without the chuck until it is finished and it used to be a struggle now I can unlock the chucks by hand only it a must if you need to change items frequently. It is solid and easy to fit with a resistance to dust. All machines should have them as standard.
Was this review helpful?
