To give our customers the best shopping experience, our website uses cookies.  Learn More

Turners Select Powdered Metal Inlay

Turners Select Powdered Metal Inlay
  • View Larger
  • Aluminum
  • Brass
  • Copper

Customer rating on this product:

Read reviews ( 5 ) | Write a review

Turners Select Powdered Metal Inlay


Our Price: $13.95$18.95

View Product Details

Select options above to check availability

Live Help


    Powdered metal inlay is perfect for creating one-of-a-kind turnings using wood that might otherwise be discarded. Perfect for filling small cracks, natural voids along with carved patterns, powdered metal adds beauty, interest and value to your work.
    It can also be used to create accent bands on pens, decorative rings on bowls and other types of work.

    Inexpensive and easy to use, powdered metal can be mixed with clear epoxy, instant glue or Inlace clear.
  • 8 oz.
  • 320 Mesh
WARNING: Cancer and Reproductive Harm -
0 of 0 people found this review helpful.

Love these!

Comments On Dec 03, 2019:I have used both the brass and copper powder. Some I repaired blemishes, some I did a designed inlay. All worked beautifully! Highly recommend.

Was this review helpful?

1 of 1 people found this review helpful.

Love this stuff

Comments On Aug 30, 2017:I've used it, mixed with epoxy to fill voids, and it works very well. Some reviewers have remarked that the powder is too fine for use with thin CA. I have not tried using it that way, but I can say that the consistency is perfect for mixing with epoxy.

Was this review helpful?

4 of 4 people found this review helpful.

Beautiful way to fill voids and cracks

Comments On Dec 22, 2016:I use the copper version all the time, it looks especially good with cherry burl pieces that have a lot of surprise cracks and voids. It takes some practice to keep from washing out too much of the powder, but after a few tries, it goes well. Very thin CA is a must, and you can't be too heavy handed with the glue! A detail glue tip, free of buildup helps a lot as well.
This is a must have item in my turning shop and if you have a little patience (and some practice pieces), you will find yourself reaching for it as well.
I haven't tried the aluminum or brass finish yet, but I'm ordering the brass today

Was this review helpful?

8 of 8 people found this review helpful.

Practice, Practice, Practice!

Comments On Dec 02, 2013:I bought the Aluminum, I agree with the previous comment. This powder is extremely fine. Thin CA glue is definitely a must, but it does tend to wash away some of the particles as you are putting it on. Work slowly and Practice, Practice, Practice before using on final product ! The inlay void needs to have a very sharp outline with very sharp edges if you want the finish product to display properly. I experimented with this and it looks like I just drew a line with a silver sharpee.

Was this review helpful?

28 of 29 people found this review helpful.

Nice looking when done, but too fine!

Comments On Feb 14, 2013:I have used the copper & brass product extensively. I can tell you that having fresh thin CA is IMPORTANT. However, even with this, this metal is so fine that the CA does not always wick into it because it's so fine and compact. I have made my own shavings using files, and sometimes mix the two for better results. I implore Craft Supplies USA to find and offer a larger particle, like a 30 mesh size. The larger the particle, the easier for the glue to wick. The flip side to this is that the larger the metal particles, the more black (dried CA) you will see in between the metal particles.
The aluminum is the hardest to use because it tends to cake. Also, it is the lightest and doesn't sink as fast as Brass and copper. Copper seems to work the best.

Was this review helpful?