Beall Spindle Tap
Customer service is our top priority at Craft Supplies USA. We take great pride in providing our valued customers with unrivaled service, top quality products, and hassle-free returns. We make every effort to make sure your experience is so good that you're eager to do business with us again.
100% Satisfaction Guarantee
Our guarantee is simple… if for any reason you're not completely satisfied with any product, you can return it for a prompt refund or replacement. No Risk, No Hassles, Guaranteed.
Quality Products
We do our very best to offer the quality products available. We carefully evaluate every product for quality, performance and value before we make it available to you, our valued customer. If a product doesn't meet our standards, we won't offer it, period.
Have questions?
Live chat: Click Here (Leave email if after hours)
Email:service@woodturnerscatalog.com
Call us: 1 800 551-8876
7am–6pm Mountain Time, Monday–Friday
Details
- Making custom wooden jigs and fixtures that thread directly onto your lathe spindle is easy and inexpensive with a Beall® Spindle Tap. Just drill a pilot hole in the wood, thread the tap into the blank, and turn yourself a jamb chuck, jig or whatever you need in only minutes. Being made of wood, you can re-turn a wooden chuck several times over before discarding it.
When drilling the hole to tap, drill 1/8" smaller than the tap being used. See the required sizes below.
1" x 8TPI: 7/8"
1-1/4" x 8TPI: 1-1/8"
M33-3.5: 1-3/16"
0 of 0 people found this review helpful.
Does what it should
Robert in CA
Comments On Mar 11, 2016:A fine quality tap with really sharp teeth.
Was this review helpful?
0 of 0 people found this review helpful.
Works great, handy to have around if you make jigs
PAUL in OR
Comments On Apr 01, 2015:This tap works exactly as advertised. Just drill a hole and thread the tap in. It's durable, sharp, and accurate - what more could you ask! Very handy to have around if you make accessory jigs, jam chucks, or anything else that threads onto your headstock.
Was this review helpful?
0 of 0 people found this review helpful.
Great
Bryan in GA
Comments On Oct 18, 2014:I like this a lot works very well
Was this review helpful?
2 of 2 people found this review helpful.
A different way to hold a bowl blank
CHARLES in FL
Comments On Jan 26, 2014:I like to use this to mount the blank directly on the drive spindle. Great for when you have to swing the head out for larger pieces. The hole holds tight and not prone to stripping out.Just drill a pilot hole and tap it out to fit your lathe spindle.
Was this review helpful?
2 of 2 people found this review helpful.
Beall Spindle Tap for 1# x 8TPi
Thomas in NE
Comments On Dec 27, 2013:I like this tap. Using a 7/8 inch forstner pit to create a pilot hole it was then easily tapped and screwed on to my Jet 12 inch lathe. I used pine to begin with to see what the softness would do to the stability. No problem. I easily took a 2 by 6 SPF square and created a nice jam chuck. I look forward to creating other jigs and chucks as needed.
Was this review helpful?
