Top Brands in: Shop Supplies | Lathe Accessories

Latest Lathe Accessories Reviews

  • Precision Machine 1-3/4" Screw Center Chuck

    Precision Machine 1-3/4" Screw Center Chuck

    in MT

    Precision machine 1 3/4" inch screw center chuck

    I have four Precision Machine 3" screw center chucks, two of the 1 3/4" screw center chucks, and two of the (now discontinued) 4 3/4" screw center chucks. I first bought a couple of these twenty years ago, and have added more from time to time. I've found PM to produce an exceptional product and tolerance is within a few thousandths for all of them. I much prefer steel faceplates to aluminum. These will withstand use and abuse, and will last longer than you will! It is a good idea to get the replacement screw. I have modified one of my chuck center screws for a special purpose, and eventually you probably will, too.....have another one on hand. I have multiple screw center chucks, so that remounting of unfinished work is possible without the need to re-install the chuck. This insures perfect alignment on subsequent remounts.

    Read All Reviews
  • Precision Machine Pen Center

    Precision Machine Pen Center

    Bert in ID

    great tool

    My lathe is a little older and tired, probably needs an overhaul but with this new center I can turn pens and small items on the mandrel and they turn true--not off center. Changing blanks is now quicker so my production rate has increased too. This center was a good investment for my shop...... I have never been disappointed with anything I bought from Craft Supplies USA. Quick delivery, great customer service, quality products at a fair price.

    Read All Reviews
  • Precision Machine 3" Screw Center Chuck

    Precision Machine 3" Screw Center Chuck

    KELLY in MT

    Precision machine 3" inch screw center chuck

    I have four Precision Machine 3" screw center chucks, two of the 1 3/4" screw center chucks, and two of the (now discontinued) 4 3/4" screw center chucks. I first bought a couple of these twenty years ago, and have added more from time to time. I've found PM to produce an exceptional product and tolerance is within a few thousandths for all of them. I much prefer steel faceplates to aluminum. These will withstand use and abuse, and will last longer than you will! It is a good idea to get the replacement screw. I have modified one of my chuck center screws for a special purpose, and eventually you probably will, too.....have another one on hand. I have multiple screw center chucks, so that remounting of unfinished work is possible without the need to re-install the chuck. This insures perfect alignment on subsequent remounts.

    Read All Reviews
  • Vicmarc 5" Dovetail Jaw Set

    Vicmarc 5" Dovetail Jaw Set

    DR. TAREK in

    The easy way for holding larger items

    I like to turn 12" and above Decorated Bowls and for that it has been somewhat difficult with the Vicmarc100 but this has been the case until I had the Vicmarc 120 from Craft supplies USA with the larger Jaws. I now have no problems holding to 31" Wall Platter. Thank you very much for the excellent quality of the items supplied . Doc.TA

    Read All Reviews
  • Turners Select Morse Taper Reducer

    Turners Select Morse Taper Reducer

    Corey in WI

    Required modification for use with small lathe

    I was switching from a very old 1MT lathe to a new(er) Rikon 70-050VS so I puchased the reducer so I could continue using the older 1MT centers while I bought newer 2MT replacements. Upon inserting the reducer I found that it bottomed out in the headstock before making proper contact around the collar, but this was easily corrected by cutting 7/8" off the bottom (most of the black part). After that it worked perfectly. This issue probably only exists with specific smaller lathes.

    Read All Reviews
  • Turners Select No-Lock Spindle Washer

    Turners Select No-Lock Spindle Washer

    DR. TAREK in

    life is easy now when you want to change chucks

    This has made my life very easy as I do not need the tools now to change the chucks. I have only five chucks but some time I have more than one project at any one time and I do not like to remove the items without the chuck until it is finished and it used to be a struggle now I can unlock the chucks by hand only it a must if you need to change items frequently. It is solid and easy to fit with a resistance to dust. All machines should have them as standard.

    Read All Reviews

Drive Centers, Revolving Centers, Faceplates, Tool Rests and more for your Lathe

Our selection of in stock woodturning lathe accessories is second to none. Everything from drive centers, revolving centers, tool rests, and faceplates, we have it all. All our lathe accessories have been shop tested in our woodturning workshop so you can rest assured you are purchasing a quality product that will last.